PIER B
 
Progress In Electromagnetics Research B
ISSN: 1937-6472
Home | Search | Notification | Authors | Submission | PIERS Home | EM Academy
Home > Vol. 76 > pp. 111-123

FAST DESIGN OF ASYMMETRICAL PERMANENT MAGNET SYNCHRONOUS MACHINES THAT MINIMIZE PULSATING TORQUE

By A. J. Pina Ortega

Full Article PDF (1,101 KB)

Abstract:
Torque pulsations in Permanent Magnet Synchronous Machines are mainly created by interaction between the permanent magnets and stator teeth, harmonics in the stator current, steel saturation and partial magnet demagnetization. As a consequence of torque ripple, there are increased noise and vibrations. To overcome them, some methods for reducing pulsating torque include controlled-asymmetry. The strategy seeks for compensate or cancel out spatial harmonics of flux density in the air gap. This work proposes an analytical method based upon sub-domain model that allows techniques such as stator teeth pairing, slot opening shift, nonuniform teeth, tangential shift of magnets, different magnet widths, among others, to be utilized and quickly analyzed. Since asymmetries introduce several degrees of freedom, the design of Permanent Magnet Synchronous Machines can be accelerated by means of analytical-based tools. The proposed model is validated with Finite Element method.

Citation:
A. J. Pina Ortega, "Fast Design of Asymmetrical Permanent Magnet Synchronous Machines That Minimize Pulsating Torque," Progress In Electromagnetics Research B, Vol. 76, 111-123, 2017.
doi:10.2528/PIERB17031909

References:
1. Bianchi, N. and S. Bolognani, "Design techniques for reducing the cogging torque in surface-mounted," IEEE Trans. Ind. Appl., Vol. 38, No. 5, 1259-1265, Sep. 2002.
doi:10.1109/TIA.2002.802989

2. Bianchi, N. and S. Bolognani, "Reduction of cogging force in PM linear motors by pole-shifting," IEE Proceedings — Electric Power Applications, 703-709, 2005.
doi:10.1049/ip-epa:20045082

3. Bianchi, N., S. Bolognani, D. Bon, and M. D. Pr, "Torque harmonic compensation in a synchronous reluctance motor," IEEE Trans. Energy Convers., Vol. 23, No. 2, 466-473, 2008.
doi:10.1109/TEC.2007.914357

4. Dosiek, L. and P. Pillay, "Cogging torque reduction in permanent magnet machines," IEEE Trans. Ind. Appl., Vol. 43, No. 6, 1565-1571, 2007.
doi:10.1109/TIA.2007.908160

5. Gysen, B. L. J., K. J. Meessen, J. J. H. Paulides, and E. A. Lomonova, "General formulation of the electromagnetic field distribution in machines and devices using fourier analysis," IEEE Trans. Magn., Vol. 46, No. 1, 39-52, 2010.
doi:10.1109/TMAG.2009.2027598

6. Hwang, S.-M., J.-B. Eom, G.-B. Hwang, W.-B. Jeong, and Y.-H. Jung, "Cogging torque and acoustic noise reduction in permanent magnet motors by teeth pairing," IEEE Trans. Magn., Vol. 36, No. 5, 3144-3146, 2000.
doi:10.1109/20.908714

7. Krause, P., O. Wasynczuk, S. D. Sudhoff, and S. Pekarek, Analysis of Electric Machinery and Drive Systems, IEEE Press Series on Power Engineering, Wiley, 2013.
doi:10.1002/9781118524336

8. Liu, T., S. Huang, J. Gao, and K. Lu, "Cogging torque reduction by slot-opening shift for permanent magnet machines," IEEE Trans. Magn., Vol. 49, No. 7, 4028-4031, 2013.
doi:10.1109/TMAG.2013.2239977

9. Pfister, P.-D. and Y. Perriard, "Slotless permanent-magnet machines: General analytical magnetic field calculation," IEEE Trans. Magn., Vol. 47, No. 6, 1739-1752, Jun. 2011.
doi:10.1109/TMAG.2011.2113396

10. Pina, A. and L. Xu, "Analytical prediction of torque ripple in surface-mounted permanent magnet motors due to manufacturing variations," IEEE Trans. Energy Convers., Vol. 31, No. 4, 1634-1644, 2016.
doi:10.1109/TEC.2016.2598649

11. Pina, A. and L. Xu, "Investigation of effects of asymmetries on the performance of permanent magnet synchronous machines," IEEE Trans. Energy Convers., Vol. PP, No. 99, 1-1, 2017.

12. Pina, A., S. Paul, R. Islam, and L. Xu, "Analytical model for predicting effects of manufacturing variations on cogging torque in surface-mounted permanent magnet motors," IEEE Trans. Ind. Appl., Vol. 52, No. 4, 3050-3061, 2016.
doi:10.1109/TIA.2016.2554102

13. Wang, D., X. Wang, and S. Y. Jung, "Cogging torque minimization and torque ripple suppression in surface-mounted permanent magnet synchronous machines using different magnet widths," IEEE Trans. Magn., Vol. 49, No. 5, 2295-2298, 2013.
doi:10.1109/TMAG.2013.2242454

14. Wang, D., X. Wang, D. Qiao, Y. Pei, and S. Y. Jung, "Reducing cogging torque in surfacemounted permanent-magnet motors by nonuniformly distributed teeth method," IEEE Trans. Magn., Vol. 47, No. 9, 2231-2239, 2011.
doi:10.1109/TMAG.2011.2144612

15. Wang, D., X. Wang, Y. Yang, and R. Zhang, "Optimization of magnetic pole shifting to reduce cogging torque in solid-rotor permanent-magnet synchronous motors," IEEE Trans. Magn., Vol. 46, No. 5, 1228-1234, May 2010.
doi:10.1109/TMAG.2010.2044044

16. Yang, Y., X. Wang, C. Zhu, and C. Huang, "Study of magnet asymmetry for reduction of cogging torque in permanent magnet motors," IEEE Conference on Industrial Electronics and Applications, Vol. 2, 2325-2328, 2009.


© Copyright 2010 EMW Publishing. All Rights Reserved