PIER Letters
 
Progress In Electromagnetics Research Letters
ISSN: 1937-6480
Home | Search | Notification | Authors | Submission | PIERS Home | EM Academy
Home > Vol. 52 > pp. 105-112

DESIGN AND ANALYSIS OF A CONTROLLABLE MINIATURIZED TRI-BAND FREQUENCY SELECTIVE SURFACE

By H. Li and Q. Cao

Full Article PDF (321 KB)

Abstract:
A novel miniaturized combined-element frequency selective surface (CEFSS) with simple design process is proposed for multiband applications. In this article, complementary meandered structures and complementary grid structures are combined to realize controllable tri-band characteristics, which allow the designed FSS to transmit different frequency signals at 3.3, 4.5 and 5.4 GHz while reflecting signals at 4.0 and 4.9 GHz. The miniaturized combined-element FSS in this paper has the advantage of smaller size comparing to traditional tri-band FSSs due to the use of meandered structures, which contributes to its independence of both angle and polarization. The associated equivalent circuit is provided to analyze its transmission characteristics. Furthermore, the performances of the proposed structure are evaluated by simulation and measurement, and they agree well.

Citation:
H. Li and Q. Cao, "Design and Analysis of a Controllable Miniaturized Tri-Band Frequency Selective Surface," Progress In Electromagnetics Research Letters, Vol. 52, 105-112, 2015.
doi:10.2528/PIERL14121803

References:
1. Munk, B. A., Frequency Selective Surfaces: Theory and Design, Wiley, New York, 2005.
doi:10.1002/0471723770

2. Pirhadi, A., F. Keshmiri, M. Hakkak, and M. Tayarani, "Analysis and design of dual band high directive EBG resonator antenna using square loop FSS as superstrate layer," Progress In Electromagnetics Research, Vol. 70, 1-20, 2007.
doi:10.2528/PIER07010201

3. Huang, J., T. K. Wu, and S. W. Lee, "Tri-band frequency selective surface with circular ring elements," IEEE Transactions on Antennas and Propagation, Vol. 42, No. 2, 166-175, 1994.
doi:10.1109/8.277210

4. Wang, D., et al., "Combined-element frequency selective surfaces with multiple transmission poles and zeros," IET Microwaves, Antennas and Propagation, Vol. 8, No. 3, 186-193, 2014.
doi:10.1049/iet-map.2013.0329

5. Yang, G., et al., "A novel stable miniaturized frequency selective surface," IEEE Antennas and Wireless Propagation Letters, Vol. 9, 1018-1021, 2010.
doi:10.1109/LAWP.2010.2089776

6. Liu, H. L., K. L. Ford, and R. J. Langley, "Design methodology for a miniaturized frequency selective surface using lumped reactive components," IEEE Transactions on Antennas and Propagation, Vol. 57, No. 9, 2732-2738, 2009.
doi:10.1109/TAP.2009.2027174

7. Hu, X. D., et al., "A miniaturized dual-band frequency selective surface (FSS) with closed loop and its complementary pattern," IEEE Antennas and Wireless Propagation Letters, Vol. 8, 1374-1377, 2009.

8. Wang, D., et al., "A low-profile frequency selective surface with controllable triband characteristics," IEEE Antennas and Wireless Propagation Letters, Vol. 12, 468-471, 2013.
doi:10.1109/LAWP.2013.2254459

9. Wang, H. Q., "Analysis of double band properties of frequency selective surfaces by using equivalent circuit method," Systems Engineering and Electronics, Vol. 30, No. 11, 2054-2057, 2008.

10. Cui, Y., X. Y. Hou, and C. K. Tang, "Equivalent-circuit for analysis of performance of double-square-loop FSS," Journal of Missile and Guidance, Vol. 26, No. 2, 322-324, 2006.

11. Li, X. L., P. C. Zhao, and Z. Y. Zong, "Equivalent circuit model for frequency selective surface loaded with lumped capacitance," Journal of Nanjing University of Science and Technology, Vol. 35, No. 4, 539-542, 2011.

12. Bayatpur, F., "Metamaterial-inspired frequency-selective surfaces,", Ph.D. Dissertation, The University of Michigan, 2009.


© Copyright 2010 EMW Publishing. All Rights Reserved