1. Zhu, X., G. Zi, W. Lee, S. Kim, and J. Kong, "Probabilistic analysis of reinforcement corrosion due to the combined action of carbonation and chloride ingress in concrete," Constr. Build. Mater., Vol. 124, 667-680, 2016.
doi:10.1016/j.conbuildmat.2016.07.120

2. Rehman, S. K. U., Z. Ibrahim, S. A. Memon, and M. Jameel, "Nondestructive test methods for concrete bridges: A review," Constr. Build. Mater., Vol. 107, 58-86, 2016.
doi:10.1016/j.conbuildmat.2015.12.011

3. Česen, A., T. Kosec, and A. Legat, "Characterization of steel corrosion in mortar by various electrochemical and physical techniques," Corros. Sci., Vol. 75, 47-57, 2013.
doi:10.1016/j.corsci.2013.05.015

4. Reou, J. S. and K. Y. Ann, "Electrochemical assessment on the corrosion risk of steel embedment in OPC concrete depending on the corrosion detection techniques," Mater. Chem. Phys., Vol. 113, No. 1, 78-84, 2009.
doi:10.1016/j.matchemphys.2008.07.063

5. Yeih, W. and R. Huang, "Detection of the corrosion damage in reinforced concrete members by ultrasonic testing," Cem. Concr. Res., Vol. 28, No. 7, 1071-1083, 1998.
doi:10.1016/S0008-8846(98)00060-X

6. Patil, S., B. Karkare, and S. Goyal, "Acoustic emission vis-a-vis electrochemical techniques for corrosion monitoring of reinforced concrete element," Constr. Build. Mater., Vol. 68, 326-332, 2014.
doi:10.1016/j.conbuildmat.2014.06.068

7. Zaki, A., H. K. Chai, D. G. Aggelis, and N. Alver, "Non-destructive evaluation for corrosion monitoring in concrete: A review and capability of acoustic emission technique," Sensors, Vol. 15, No. 8, 19069-19101, 2015.
doi:10.3390/s150819069

8. Ohtsu, M., K. Mori, and Y. Kawasaki, "Corrosion process and mechanisms of corrosion-induced cracks in reinforced concrete identified by AE analysis," Strain, Vol. 47, 179-186, 2011.
doi:10.1111/j.1475-1305.2010.00754.x

9. Xu, C., N. Zhou, J. Xie, X. Gong, G. Chen, and G. Song, "Investigation on eddy current pulsed thermography to detect hidden cracks on corroded metal surface," NDT E Int., Vol. 84, 27-35, 2016.
doi:10.1016/j.ndteint.2016.07.002

10. Cacciola, M., S. Calcagno, G. Megali, F. C. Morabito, D. Pellicano, and M. Versaci, "FEA design and misfit minimization for in-depth flaw characterization in metallic plates with eddy current nondestructive testing," IEEE Trans. Magn., Vol. 45, No. 3, 1506-1509, 2009.
doi:10.1109/TMAG.2009.2012691

11. Buonsanti, M., M. Cacciola, G. Megali, F. C. Morabito, D. Pellicanò, and M. Versaci, "A rotating magnetic field for detection of cracks in metal welded joints and quality control," Proceedings of the Ninth International Conference on Computational Structures Technology, Paper 68, Stirlingshire, UK, 2008.

12. Kylili, A., P. A. Fokaides, P. Christou, and S. A. Kalogirou, "Infrared thermography (IRT) applications for building diagnostics: A review," Appl. Energy, Vol. 134, 531-549, 2014.
doi:10.1016/j.apenergy.2014.08.005

13. Bagavathiappan, S., B. B. Lahiri, T. Saravanan, J. Philip, and T. Jayakumar, "Infrared thermography for condition monitoring - A review," Infrared Phys. Technol., Vol. 60, 35-55, 2013.
doi:10.1016/j.infrared.2013.03.006

14. Kobayashi, K. and N. Banthia, "Corrosion detection in reinforced concrete using induction heating and infrared thermography," J. Civ. Struct. Health Monit., Vol. 1, No. 1-2, 25-35, 2011.
doi:10.1007/s13349-010-0002-4

15. Hong, S., H. Wiggenhauser, R. Helmerich, B. Dong, P. Dong, and F. Xing, "Long-term monitoring of reinforcement corrosion in concrete using ground penetrating radar," Corros. Sci., Vol. 114, 123-132, 2017.
doi:10.1016/j.corsci.2016.11.003

16. Zhang, H., L. Liao, R. Zhao, J. Zhou, M. Yang, and R. Xia, "The non-destructive test of steel corrosion in reinforced concrete bridges using a micro-magnetic sensor," Sensors, Vol. 16, No. 9, 1439, 2016.
doi:10.3390/s16091439

17. Fernandes, B., D. Nims, and V. Devabhaktuni, "Comprehensive MMF-MFL inspection for corrosion detection and estimation in embedded prestressing strands," J. Civ. Struct. Health Monit., Vol. 4, No. 1, 43-55, 2014.
doi:10.1007/s13349-013-0061-4

18. Xu, Y., K. Li, L. Liu, L. Yang, X. Wang, and Y. Huang, "Experimental study on rebar corrosion using the galvanic sensor combined with the electronic resistance technique," Sensors, Vol. 16, No. 9, 1451, 2016.
doi:10.3390/s16091451

19. Tan, C. H., Y. G. Shee, B. K. Yap, and F. R. M. Adikan, "Fiber Bragg grating based sensing system: Early corrosion detection for structural health monitoring," Sens. Actuators Phys., Vol. 246, 123-128, 2016.
doi:10.1016/j.sna.2016.04.028

20. Mao, J., J. Chen, L. Cui, W. Jin, C. Xu, and Y. He, "Monitoring the corrosion process of reinforced concrete using BOTDA and FBG sensors," Sensors, Vol. 15, No. 4, 8866-8883, 2015.
doi:10.3390/s150408866

21. Takahashi, Y., "In-situ X-ray diffraction of corrosion products formed on iron surfaces," Mater. Trans., Vol. 46, No. 3, 637-642, 2005.
doi:10.2320/matertrans.46.637

22. Wu, Z., "Imaging of soft material with carbon nanotube tip using near-field scanning microwave microscopy," Ultramicroscopy, Vol. 148, 75-80, 2015.
doi:10.1016/j.ultramic.2014.09.008

23. Kawata, S., Y. Inouye, and P. Verma, "Plasmonics for near-field nano-imaging and superlensing," Nat. Photonics, Vol. 3, No. 7, 388-394, 2009.
doi:10.1038/nphoton.2009.111

24. Oka, S., H. Togo, N. Kukutsu, and T. Nagatsuma, "Latest trends in millimeter-wave imaging technology," Progress In Electromagnetics Research Letters, Vol. 1, 197-204, 2008.
doi:10.2528/PIERL07120604

25. Balanis, C. A., Antenna Theory: Analysis and Design, John Wiley & Sons, 2015.

26. Wang, P., Y. Pei, and L. Zhou, "Near-field microwave identification and quantitative evaluation of liquid ingress in honeycomb sandwich structures," NDT E Int., Vol. 83, 32-37, 2016.
doi:10.1016/j.ndteint.2016.06.002

27. Haddadi, K., S. Gu, and T. Lasri, "Sensing of liquid droplets with a scanning near-field microwave microscope," Sens. Actuators Phys., Vol. 230, 170-174, 2015.
doi:10.1016/j.sna.2015.04.028

28. Hussein, K. F. A., "Efficient near-field computation for radiation and scattering from conducting surfaces of arbitrary shape," Progress In Electromagnetics Research, Vol. 69, 267-285, 2007.
doi:10.2528/PIER07010302

29. Haddadi, K., J. Marzouk, S. Gu, S. Arscott, G. Dambrine, and T. Lasri, "Interferometric near-field microwave microscopy platform for electromagnetic micro-analysis," Procedia Eng., Vol. 87, 388-391, 2014.
doi:10.1016/j.proeng.2014.11.733

30. Esslinger, M. and R. Vogelgesang, "Reciprocity theory of apertureless scanning near-field optical microscopy with point-dipole probes," Acs Nano, Vol. 6, No. 9, 8173-8182, 2012.
doi:10.1021/nn302864d

31. Sundaramurthy, A., P. J. Schuck, N. R. Conley, D. P. Fromm, G. S. Kino, and W. E. Moerner, "Toward nanometer-scale optical photolithography: Utilizing the near-field of bowtie optical nanoantennas," Nano Lett., Vol. 6, No. 3, 355-360, 2006.
doi:10.1021/nl052322c

32. Gao, C., X. Xiang, and Z. Wu, "Novel scanning tip microwave near-field microscopy," Physics, Vol. 68, No. 68, 3506-3508, 1999.

33. Castro, A. F., M. Valcuende, and B. Vidal, "Using microwave near-field reflection measurements as a non-destructive test to determine water penetration depth of concrete," NDT E Int., Vol. 75, 26-32, 2015.
doi:10.1016/j.ndteint.2015.06.003