1. Zhu, Z. and D. Howe, "Analytical prediction of the cogging torque in radial-field permanent magnet brushless motors," IEEE Transactions on Magnetics, Vol. 28, No. 2, 1371-1374, 1992.
doi:10.1109/20.123947
2. Wu, L., Z. Zhu, D. Staton, M. Popescu, and D. Hawkins, "Analytical cogging torque prediction for surface-mounted pm machines accounting for different slot sizes and uneven positions," 2011 IEEE International Electric Machines & Drives Conference (IEMDC), 1322-1327, IEEE, 2011.
doi:10.1109/IEMDC.2011.5994797
3. Wang, D., X. Wang, D. Qiao, Y. Pei, and S.-Y. Jung, "Reducing cogging torque in surface-mounted permanent-magnet motors by nonuniformly distributed teeth method," IEEE Transactions on Magnetics, Vol. 47, No. 9, 2231-2239, 2011.
doi:10.1109/TMAG.2011.2144612
4. Aydin, M., Z. Zhu, T. Lipo, and D. Howe, "Minimization of cogging torque in axial-flux permanent-magnet machines: Design concepts," IEEE Transactions on Magnetics, Vol. 43, No. 9, 3614-3622, 2007.
doi:10.1109/TMAG.2007.902818
5. González, D. A., J. A. Tapia, and A. L. Bettancourt, "Design consideration to reduce cogging torque in axial flux permanent-magnet machines," IEEE Transactions on Magnetics, Vol. 43, No. 8, 3435-3440, 2007.
doi:10.1109/TMAG.2007.899349
6. Zhu, Z. and D. Howe, "Instantaneous magnetic field distribution in brushless permanent magnet dc motors. iii. Effect of stator slotting," IEEE Transactions on Magnetics, Vol. 29, No. 1, 143-151, 1993.
doi:10.1109/20.195559
7. Zhu, Z. and D. Howe, "Instantaneous magnetic field distribution in permanent magnet brushless dc motors. iv. Magnetic field on load," IEEE Transactions on Magnetics, Vol. 29, No. 1, 152-158, 1993.
doi:10.1109/20.195560
8. Zarko, D., D. Ban, and T. A. Lipo, "Analytical calculation of magnetic field distribution in the slotted air gap of a surface permanent-magnet motor using complex relative air-gap permeance," IEEE Transactions on Magnetics, Vol. 42, No. 7, 1828-1837, 2006.
doi:10.1109/TMAG.2006.874594
9. Zarko, D., D. Ban, and T. A. Lipo, "Analytical solution for cogging torque in surface permanent-magnet motors using conformal mapping," IEEE Transactions on Magnetics, Vol. 44, No. 1, 52-65, 2008.
doi:10.1109/TMAG.2007.908652
10. Dubas, F. and C. Espanet, "Analytical solution of the magnetic field in permanent-magnet motors taking into account slotting effect: No-load vector potential and flux density calculation," IEEE Transactions on Magnetics, Vol. 45, No. 5, 2097-2109, 2009.
doi:10.1109/TMAG.2009.2013245
11. Lubin, T., S. Mezani, and A. Rezzoug, "2-d exact analytical model for surface-mounted permanent-magnet motors with semi-closed slots," IEEE Transactions on Magnetics, Vol. 47, No. 2, 479-492, 2011.
doi:10.1109/TMAG.2010.2095874
12. Zhu, Z., L. Wu, and Z. Xia, "An accurate subdomain model for magnetic field computation in slotted surface-mounted permanent-magnet machines," IEEE Transactions on Magnetics, Vol. 46, No. 4, 1100-1115, 2010.
doi:10.1109/TMAG.2009.2038153
13. Zhu, Z., D. Howe, E. Bolte, and B. Ackermann, "Instantaneous magnetic field distribution in brushless permanent magnet dc motors. i. Open-circuit field," IEEE Transactions on Magnetics, Vol. 29, No. 1, 124-135, 1993.
doi:10.1109/20.195557
14. Azzouzi, J., G. Barakat, and B. Dakyo, "Quasi-3-d analytical modeling of the magnetic field of an axial flux permanent-magnet synchronous machine," IEEE Transactions on Energy Conversion, Vol. 20, No. 4, 746-752, 2005.
doi:10.1109/TEC.2005.845538