1. Liu, E., L. Lv, Y. Yi, and P. Xie, "Research on the steady operation optimization model of natural gas pipeline considering the combined operation of air coolers and compressors," IEEE Access, Vol. 7, 83251-83265, 2019, doi: 10.1109/ACCESS.2019.2924515.
doi:10.1109/ACCESS.2019.2924515

2. Snoussi, J., S. B. Elghali, M. Benbouzid, and M. F. Mimouni, "Optimal sizing of energy storage systems using frequency-separation-based energy management for fuel cell hybrid electric vehicles," IEEE Trans. Veh. Technol., Vol. 67, No. 10, 9337-9346, Oct. 2018.
doi:10.1109/TVT.2018.2863185

3. Kim, H. J., J. S. Jeong, M. H. Yoon, J. W. Moon, and J. P. Hong, "Simple size determination of permanent-magnet synchronous machines," IEEE Transactions on Industrial Electronics, Vol. 64, No. 10, 7972-7983, Oct. 2017.
doi:10.1109/TIE.2017.2694407

4. Lim, M. S., S. H. Chai, J. S. Yang, and J. P. Hong, "Design and verification of 150-krpm PMSM based on experiment results of prototype," IEEE Transactions on Industrial Electronics, Vol. 62, No. 12, 7827-7836, Dec. 2015.
doi:10.1109/TIE.2015.2409804

5. Zhang, F., R. Dai, G. Liu, and T. Cui, "Design of HSIPMM based on multiphysics fields," IET Electric Power Appl., Vol. 12, No. 8, 1098-1103, Sep. 2018.
doi:10.1049/iet-epa.2017.0784

6. Pfister, P. D. and Y. Perriard, "Very-high-speed slotless permanent-magnet motors: Analytical modeling, optimization, design, and torque measurement methods," IEEE Transactions on Industrial Electronics, Vol. 57, No. 1, 296-303, Jan. 2010.
doi:10.1109/TIE.2009.2027919

7. Sun, X., Z. Shi, Y. Cai, G. Lei, Y. Guo, and J. Zhu, "Driving-cycle-oriented design optimization of a permanent magnet hub motor drive system for a four-wheel-drive electric vehicle," IEEE Trans. Transp. Electrific., Vol. 6, No. 3, 1115-1125, Sep. 2020.
doi:10.1109/TTE.2020.3009396

8. Sun, X., M. Wu, G. Lei, Y. Guo, and J. Zhu, "An improved model predictive current control for PMSM drives based on current track circle," IEEE Transactions on Industrial Electronics, Vol. 68, No. 5, 3782-3793, May 2021, doi: 10.1109/TIE.2020.2984433.
doi:10.1109/TIE.2020.2984433

9. Sun, X., Z. Shi, G. Lei, Y. Guo, and J. Zhu, "Multi-objective design optimization of an IPMSM based on multilevel strategy," IEEE Transactions on Industrial Electronics, Vol. 68, No. 1, 139-148, Jan. 2021, doi: 10.1109/TIE.2020.2965463.
doi:10.1109/TIE.2020.2965463

10. Sun, X., Z. Shi, and J. Zhu, "Multiobjective design optimization of an IPMSM for EVs based on fuzzy method and sequential taguchi method," IEEE Transactions on Industrial Electronics, Vol. 68, No. 11, 10592-10600, Nov. 2021, doi: 10.1109/TIE.2020.3031534.
doi:10.1109/TIE.2020.3031534

11. Ahmed, S., D. Tremelling, H. Kim, Z. Zhang, N. Frank, and R. McElveen, "Modeling, simulation and performance evaluation of cage rotor permanent magnet motor fed by variable speed drive," 2016 IEEE Energy Conversion Congress and Exposition (ECCE), 1-6, 2016, doi: 10.1109/ECCE.2016.7855267.

12. Zhou, Y., L. Zhou, B. Hu, et al. "Design and performance analysis of permanent magnet flux-switching motors using segmental permanent magnets," IEICE Electronics Express, Vol. 16, 20190193, 2019.
doi:10.1587/elex.16.20190193

13. Park, S. H., E.-C. Lee, J.-C. Park, S.-W. Hwang, and M.-S. Lim, "Prediction of mechanical loss for high-power-density PMSM considering eddy current loss of PMs and conductors," IEEE Transactions on Magnetics, Vol. 57, No. 2, 1-5, Feb. 2021, Art no. 6300205, doi: 10.1109/TMAG.2020.3007439.

14. Kim, J. H., D. M. Kim, Y.-H. Jung, and M.-S. Lim, "Design of ultra-high-speed motor for FCEV air compressor considering mechanical properties of rotor materials," IEEE Transactions on Energy Conversion, Vol. 36, No. 4, 2850-2860, Dec. 2021, doi: 10.1109/TEC.2021.3062646.
doi:10.1109/TEC.2021.3062646

15. Mahmoudi, A., S. Kahourzade, N. A. Rahim, and W. P. Hew, "Design, analysis, and prototyping of an axial- ux permanent magnet motor based on genetic algorithm and finite-element analysis," IEEE Transactions on Magnetics, Vol. 49, No. 4, 1479-1492, Apr. 2013, doi: 10.1109/TMAG.2012.2228213.
doi:10.1109/TMAG.2012.2228213

16. Ni, S. and U. Schaefer, "Optimization of a spoke-type permanent magnet motor by combination of genetic algorithm and finite element method," 2018 XIII International Conference on Electrical Machines (ICEM), 892-{898, 2018, doi: 10.1109/ICELMACH.2018.8506715.
doi:10.1109/ICELMACH.2018.8506715

17. Jedryczka, C., L. Knypiński, A. Demenko, and J. K. Sykulski, "Methodology for cage shape optimization of a permanent magnet synchronous motor under line start conditions," IEEE Transactions on Magnetics, Vol. 54, No. 3, 1-4, Mar. 2018, Art no. 8102304, doi: 10.1109/TMAG.2017.2764680.
doi:10.1109/TMAG.2017.2764680

18. Belahcen, A., F. Martin, M. E.-H. Zaim, E. Dlala, and Z. Kolondzovski, "Combined FE and particle swarm algorithm for optimization of high speed PM synchronous machine," COMPEL-Int. J. Comput. Math. Elect. Electron. Eng., Vol. 34, No. 2, 475-484, 2015.
doi:10.1108/COMPEL-07-2014-0168

19. Lee, T., M. Seo, Y. Kim, and S. Jung, "Motor design and characteristics comparison of outer-rotor-type BLDC motor and BLAC motor based on numerical analysis," IEEE Transactions on Applied Superconductivity, Vol. 26, No. 4, 1-6, Jun. 2016, Art no. 5205506, doi: 10.1109/TASC.2016.2548079.

20. Aliabad, A. D. and F. Ghoroghchian, "Design and analysis of a two-speed line start synchronous motor: Scheme one," IEEE Transactions on Energy Conversion, Vol. 31, No. 1, 366-372, Mar. 2016, doi: 10.1109/TEC.2015.2481929.
doi:10.1109/TEC.2015.2481929