PIER Letters
 
Progress In Electromagnetics Research Letters
ISSN: 1937-6480
Home | Search | Notification | Authors | Submission | PIERS Home | EM Academy
Home > Vol. 34 > pp. 1-8

A FURTHER INVESTIGATION ON THE PERFORMANCE OF THE BROADSIDE COUPLED RECTANGULAR SPLIT RING RESONATORS

By T. A. Elwi

Full Article PDF (625 KB)

Abstract:
In this paper, a numerical study based on the Finite Element Method (FEM) formulation of Ansoft's High Frequency Structure Simulator (HFSS) is reported to investigate the performance of a conformal Broadside Coupled Rectangular Split Ring Resonators (BC-SRR) of negative effective permeability around a resonant frequency of 1.27 GHz for non-linear polarization applications. The size of the BC-SRR is 15 mm x 15 mm x 0.8 mm on a polyimide substrate with a relative permittivity of 3.5 and a loss tangent of 0.004. The performance of the BC-SRR is characterized in terms of reflection and transmission spectra, effective relative permittivity and permeability, and the dispersion diagram for both flat and twisted profiles. The flat BC-SRR operates over the frequency range from 1.2615 to 1.2842 GHz. The twisted BC-SRR inclusions are investigated at 90°. It has been found that the resonant frequency is changed to 1.1064 GHz and bandwidth becomes from 1.08 GHz to 1.0537 GHz for the twisted profile. Moreover, it is found that the unit cell of the twisted BC-SRR profile is based on two BC-SRRs inclusions. Furthermore, it is found that the twisted profile exhibits negative relative permittivity and permeability simultaneously.

Citation:
T. A. Elwi, "A Further Investigation on the Performance of the Broadside Coupled Rectangular Split Ring Resonators," Progress In Electromagnetics Research Letters, Vol. 34, 1-8, 2012.
doi:10.2528/PIERL12070409

References:
1. Niu, J.-X. and X.-L. Zhou, "Analysis of balanced composite right/left handed structure based on different dimensions of complementary split ring resonators," Progress In Electromagnetics Research, Vol. 74, 341-351, 2007.
doi:10.2528/PIER07051802

2. Guo, Y. and R. Xu, "Planar metamaterials supporting multiple left-handed modes," Progress In Electromagnetics Research, Vol. 66, 239-251, 2006.
doi:10.2528/PIER06113001

3. Sabah, C., "Tunable metamaterial design composed of triangular split ring resonator and wire strip for S- and C-microwave bands," Progress In Electromagnetics Research, Vol. 66, 341-357, 2010.

4. Penciu, R. S., K. Aydin, M. Kafesaki, T. Koschny, E. Ozbay, E. N. Economou, and C. M. Soukoulis, "Multi-gap individual and coupled split-ring resonator structures," Optical Society of America, Vol. 16, No. 22, 1-14, Oct. 2008.

5. Chern, R. L., "Large magnetic resonance band gaps for split ring structures with high internal fractions," Optical Society of America, Vol. 16, No. 25, 1-7, Dec. 2008.

6. Marques, R., F. Mesa, J. Martel, and F. Medina, "Comparative analysis of edge- and broadside-coupled split ring resonators for metamaterial design-theory and experiments," IEEE Transactions on Antennas and Propagation, Vol. 51, No. 10, 33-41, Oct. 2003.

7. Balmaz, P. G. and O. J. F. Martin, "Electromagnetic resonances in individual and coupled split-ring resonators," Journal of Applied Physics, Vol. 92, No. 5, 2929-2936, Jun. 2002.
doi:10.1063/1.1497452

8. Marques, R., F. Martin, and M. Sorolla, "Metamaterials with negative parameters: Theory, design and microwave applications," Wiley Series in Microwave and Optical Engineering, Feb. 2008.

9. Bait Suwailam, M. M., M. S. Boybay, and O. M. Ramahi, "Electromagnetic coupling reduction in high-profile monopole antennas using single-negative magnetic metamaterials for MIMO applications," IEEE Trans. on Ant. & Prop., Vol. 58, No. 9, 2894-2902, Sep. 2010.
doi:10.1109/TAP.2010.2052560

10. Ansoft's High Frequency Structure Simulator HFSS, 2th version, , 2010, Available: http://www.ansoft.com.
doi:10.1109/TAP.2010.2052560


© Copyright 2010 EMW Publishing. All Rights Reserved