2026-11-16
Design and Simulation of Grid-Connected Surface-Mounted PMSG-Based Wind Energy Conversion System
By
Progress In Electromagnetics Research B, Vol. 119, 64-78, 2026
Abstract
This study presents the design and simulation of a grid-connected wind energy conversion system (WECS) based on a surface-mounted permanent magnet synchronous generator (PMSG). The initial mechanical power design target was 1.5\,kW at 1500\,rpm, while the experimentally characterized prototype was evaluated under laboratory operating constraints. The methodology combines analytical design, two-dimensional finite element method (FEM) analysis, experimental characterization, and MATLAB/Simulink simulation of the grid-connected power conversion chain. We experimentally validated the manufactured PMSG, a three-phase diode rectifier, and a standalone sinusoidal pulse-width modulation (SPWM) inverter, while investigating the boost converter, grid-side voltage source inverter (VSI), LCL filter, phase-locked loop (PLL), and grid connection exclusively through simulation. The experimental rectifier provided approximately 102 V DC, which was increased to 360 V by the simulated boost converter. The grid was modeled at 220 V line-to-line and 50 Hz, resulting in approximately 251.5 W of active power injected into the grid with a grid-current total harmonic distortion (THD) of 0.27%, confirming the low harmonic distortion obtained under the considered operating conditions. The results demonstrate the feasibility of extending the experimentally characterized low-voltage PMSG prototype to a simulated grid-connected WECS while clearly distinguishing the experimentally validated components from the simulation-only stages under the considered laboratory operating conditions.
Citation
Yasmine Saadoune, and Kamel Boughrara, "Design and Simulation of Grid-Connected Surface-Mounted PMSG-Based Wind Energy Conversion System," Progress In Electromagnetics Research B, Vol. 119, 64-78, 2026.
DOI:10.2528/PIERB26081804
References

1. Sebestyén, Viktor, "Renewable and Sustainable Energy Reviews: Environmental impact networks of renewable energy power plants," Renewable and Sustainable Energy Reviews, Vol. 151, 111626, November 2021.
doi:10.1016/j.rser.2021.111626        Google Scholar

2. Li, H. and Z. Chen, "Design optimization and evaluation of different wind generator systems," 2008 International Conference on Electrical Machines and Systems, 2396-2401, Wuhan, China, 2008.

3. Abdelrahem, Mohamed, Christoph Michael Hackl, and Ralph Kennel, "Implementation and experimental investigation of a sensorless field-oriented control scheme for permanent-magnet synchronous generators," Electrical Engineering, Vol. 100, No. 2, 849-856, May 2017.
doi:10.1007/s00202-017-0554-y        Google Scholar

4. Mansouri, Adil, Abdelmounime El Magri, Rachid Lajouad, Ilyass El Myasse, El Khlifi Younes, and Fouad Giri, "Wind energy based conversion topologies and maximum power point tracking: A comprehensive review and analysis," e-Prime --- Advances in Electrical Engineering, Electronics and Energy, Vol. 6, 100351, December 2023.        Google Scholar

5. Blaabjerg, Frede, Meng Chen, and Liang Huang, "Power electronics in wind generation systems," Nature Reviews Electrical Engineering, Vol. 1, No. 4, 234-250, March 2024.        Google Scholar

6. Mostafa, M. A., Enas A. El-Hay, and Mahmoud M. ELkholy, "Recent trends in wind energy conversion system with grid integration based on soft computing methods: Comprehensive review, comparisons and insights," Archives of Computational Methods in Engineering, Vol. 30, No. 3, 1439-1478, November 2022.
doi:10.1007/s11831-022-09842-4        Google Scholar

7. Abdel-Wahed, Ahmed T., Wael A. Taha, Mohamed G. Abdel-Moneim, Ayman S. Abdel-Khalik, Majdi Mansouri, and Shehab Ahmed, "Real wind data clustering for optimal design of a 12-slot/10-pole PMSG in wind power applications," Ain Shams Engineering Journal, Vol. 17, No. 3, 104018, March 2026.
doi:10.1016/j.asej.2026.104018        Google Scholar

8. Benhacine, Tarek Zine-eddine, Ali Dali, Abdelhamid Kherbachi, and Madjid Tata, "Performance analysis of permanent magnet synchronous generator for small scale wind energy applications," Algerian Journal of Signals and Systems, Vol. 9, No. 2, 57-61, June 2024.
doi:10.51485/ajss.v9i2.211        Google Scholar

9. Majout, Btissam, et al., "Artificial neural network-based direct power control to enhance the performance of a PMSG-wind energy conversion system under real wind speed and parameter uncertainties: An experimental validation," Energy Reports, Vol. 11, 4356-4378, June 2024.
doi:10.1016/j.egyr.2024.03.039        Google Scholar

10. Prince, Mohammad Kamruzzaman Khan, et al., "Coordinated control of grid-connected PMSG based wind energy system with STATCOM and supercapacitor energy storage," IEEE Transactions on Industry Applications, Vol. 60, No. 3, 5108-5118, May 2024.
doi:10.1109/tia.2024.3371407        Google Scholar

11. Fathelkhair, Abdelmoghit, Hassan Abouobaida, Youssef Mchaouar, Younes Abouelmahjoub, Khadija Oualifi, and Hajar Akli, "Sensorless nonlinear control based on integral backstepping technique for PMSG-based wind energy conversion system," IFAC-PapersOnLine, Vol. 58, No. 13, 448-453, 2024.
doi:10.1016/j.ifacol.2024.07.523        Google Scholar

12. Arduino, , "Arduino due", https://docs.arduino.cc/hardware/due, July 2026.

13. Nawaz, Muhammad Qasim, Wei Jiang, and Aimal Khan, "Comprehensive guide to power converter topologies for sustainablewind energy system," Iraqi Journal for Electrical & Electronic Engineering, Vol. 22, No. 1, 10-23, June 2026.
doi:10.37917/ijeee.22.1.2        Google Scholar

14. Hanselman, D. C., Brushless Permanent-Magnet Motor Design, 2nd Ed., Magna Physics Publishing, 2003.

15. Qu, R. and T. A. Lipo, "Analysis and modeling of air-gap and zigzag leakage fluxes in a surface-mounted permanent-magnet Machine," IEEE Transactions on Industry Applications, Vol. 40, No. 1, 121-127, January 2004.
doi:10.1109/tia.2003.821790        Google Scholar

16. Bianchi, N., S. Bolognani, M. D. Pre, and G. Grezzani, "Design considerations for fractional-slot winding configurations of synchronous machines," IEEE Transactions on Industry Applications, Vol. 42, No. 4, 997-1006, 2006.        Google Scholar

17. Yaramasu, Venkata, Apparao Dekka, Mario J. Durán, Samir Kouro, and Bin Wu, "PMSG-based wind energy conversion systems: Survey on power converters and controls," IET Electric Power Applications, Vol. 11, No. 6, 956-968, July 2017.
doi:10.1049/iet-epa.2016.0799        Google Scholar

18. Pyrhönen, J., T. Jokinen, and V. Hrabovcová, Design of Rotating Electrical Machines, 2nd Ed., John Wiley & Sons, 2014.

19. Fodorean, Daniel, "Technological trends for electrical machines and drives used in small wind power plants --- A review," Energies, Vol. 17, No. 24, 6483, December 2024.
doi:10.3390/en17246483        Google Scholar

20. De Menezes, Gustavo Garbelini, Narco Afonso Ravazzoli Maciejewski, Elissa Soares de Carvalho, and Thiago de Paula Machado Bazzo, "A thorough procedure to design surface-mounted permanent magnet synchronous generators," Machines, Vol. 12, No. 6, 384, June 2024.
doi:10.3390/machines12060384        Google Scholar

21. Meeker, D., "Finite element method magnetics (femm) version 4.2", https://www.femm.info, user’s Manual, July 2026.

22. Liu, Ang, Xiaoyan Huang, Zhuo Chen, Ye Ma, Yelong Yu, and Zhaokai Li, "Nonlinear analytical model-embedded optimal design for ER-PMSM," IEEE Transactions on Magnetics, Vol. 60, No. 3, 1-5, March 2024.
doi:10.1109/tmag.2023.3301500        Google Scholar

23. Chapman, S. J., Electric Machinery Fundamentals, 5th Ed., McGraw-Hill, 2012.

24. Ge, Chenchen, Muyang Liu, and Junru Chen, "Modeling of direct-drive permanent magnet synchronous wind power generation system considering the power system analysis in multi-timescales," Energies, Vol. 15, No. 20, 7471, October 2022.
doi:10.3390/en15207471        Google Scholar

25. Wang, X., M. G. Taul, H. Wu, Y. Liao, F. Blaabjerg, and L. Harnefors, "Grid-synchronization stability of converter-based resources --- An overview," IEEE Open Journal of Industry Applications, Vol. 1, 115-134, 2020.        Google Scholar

26. MathWorks, , "Matlab and simulink", https://www.mathworks.com/products/simulink.html, July 2026.

27. Roy, Shetu, Sumaiya Umme Hani, and Mohammad Abdul Mannan, "Performance analysis of boost converter for constant voltage applications under the variation of closed-loop PI controller parameters," AIUB Journal of Science and Engineering, Vol. 16, No. 1, 29-36, March 2017.
doi:10.53799/ajse.v16i1.29        Google Scholar

28. Kim, Seokwon, Donghan Seo, Seonghwan Kim, Seung-Uk Yong, and Jong-Won Shin, "Digital linear slope control for boost converter to improve load transient," IEEE Access, Vol. 12, 76826-76836, 2024.
doi:10.1109/access.2024.3407102        Google Scholar

29. Guler, Naki, Hasan Komurcugil, Sertac Bayhan, and Haitham Abu-Rub, "Simplified single-stage buck-boost rectifier with proportional-integral and cascaded proportional-resonant control method," IEEE Transactions on Industrial Electronics, Vol. 71, No. 1, 348-359, January 2024.
doi:10.1109/tie.2023.3241400        Google Scholar

30. Kim, Ki-Hyun, Shenghui Cui, and Jae-Jung Jung, "Current-oriented phase-locked loop method for robust control of grid-connected converter in extremely weak grid," IEEE Transactions on Power Electronics, Vol. 39, No. 10, 11963-11968, October 2024.
doi:10.1109/tpel.2024.3419445        Google Scholar

31. Golestan, Saeed, Josep M. Guerrero, and Juan C. Vasquez, "Three-phase PLLs: A review of recent advances," IEEE Transactions on Power Electronics, Vol. 32, No. 3, 1894-1907, March 2017.
doi:10.1109/tpel.2016.2565642        Google Scholar