Vol. 17

Latest Volume
All Volumes
All Issues
2010-08-17

Realization of a Matching Region Between a Radome and a Ground Plane

By Daniel Sjoberg and Mats Gustafsson
Progress In Electromagnetics Research Letters, Vol. 17, 1-10, 2010
doi:10.2528/PIERL10071906

Abstract

In order to reduce the monostatic signature of the junction between a radome and the metallic structure to which it is attached, a tapered resistive sheet can be used. In this paper, we describe an easy method to realize this tapering using geometric variations on a subwavelength scale, with a significant reduction of the number of processing steps as a result.

Citation


Daniel Sjoberg and Mats Gustafsson, "Realization of a Matching Region Between a Radome and a Ground Plane," Progress In Electromagnetics Research Letters, Vol. 17, 1-10, 2010.
doi:10.2528/PIERL10071906
http://www.jpier.org/PIERL/pier.php?paper=10071906

References


    1. Abdelaziz, A. A., "Improving the performance of an antenna array by using radar absorbing cover," Progress In Electromagnetics Research Letters, Vol. 1, 129-138, 2008.
    doi:10.2528/PIERL07112503

    2. Gustafsson, M., "RCS reduction of integrated antenna arrays with resistive sheets," Journal of Electromagnetic Waves and Applications, Vol. 20, No. 1, 27-40, 2006.
    doi:10.1163/156939306775777323

    3. Gustafsson, M., "Surface integrated dipole arrays with tapered resistive edge sheets," Journal of Electromagnetic Waves and Applications, Vol. 21, No. 6, 713-718, 2007.
    doi:10.1163/156939307780749093

    4. Haupt, R. L. and V. V. Liepa, "Synthesis of tapered resistive strips," IEEE Trans. Antennas Propagat., Vol. 35, No. 11, 1217-1225, 1987.
    doi:10.1109/TAP.1987.1143998

    5. Holter, H. and H. Steyskal, "Infinite phased-array analysis using FDTD periodic boundary conditions --- Pulse scanning in oblique directions," IEEE Trans. Antennas Propagat., Vol. 47, No. 10, 1508-1514, 1999.
    doi:10.1109/8.805893

    6. Hu, B., X.-W. Xu, M. He, and Y. Zheng, "More accurate hybrid PO-MoM analysis for an electrically large antenna-radome structure," Progress In Electromagnetics Research, Vol. 92, 255-265, 2009.
    doi:10.2528/PIER09022301

    7. Knott, E. F., "Suppression of edge scattering with impedance strings," IEEE Trans. Antennas Propagat., Vol. 45, No. 12, 1768-1773, 1997.
    doi:10.1109/8.650194

    8. Knott, E. F., J. F. Shaeffer, and M. T. Tuley, Radar Cross Section, SciTech Publishing Inc., 5601 N. Hawthorne Way, Raleigh, NC 27613, 2004.

    9. Munk, B., Frequency Selective Surfaces: Theory and Design, John Wiley & Sons, New York, 2000.
    doi:10.1002/0471723770

    10. Munk, B., Finite Antenna Arrays and FSS, John Wiley & Sons, New York, 2003.
    doi:10.1002/0471457531

    11. Senior, T. B. A., "Backscattering from resistive strips," IEEE Trans. Antennas Propagat., Vol. 27, No. 6, 808-813, 1979.
    doi:10.1109/TAP.1979.1142189

    12. Senior, T. B. A. and V. V. Liepa, "Backscattering from tapered resistive strips," IEEE Trans. Antennas Propagat., Vol. 32, No. 7, 747-751, 1984.
    doi:10.1109/TAP.1984.1143403

    13. Sjöberg, D., "Analysis of wave propagation in stratified structures using circuit analogs, with application to electromagnetic absorbers," Eur. J. Phys., Vol. 29, 721-734, 2008.
    doi:10.1088/0143-0807/29/4/007

    14. Sukharevsky, O. I. and V. A. Vasilets, "Scattering of reflector antenna with conic dielectric radome," Progress In Electromagnetics Research B, Vol. 4, 159-169, 2008.
    doi:10.2528/PIERB08011404

    15. Vardaxoglou, J. C., Frequency Selective Surfaces (Analysis and Design), Research Studies Press, 1997.