Vol. 55

Front:[PDF file] Back:[PDF file]
Latest Volume
All Volumes
All Issues
2017-03-08

System Electromagnetic Loss Analysis and Temperature Field Estimate of a Magnetically Suspended Motor

By Xiaojun Ren, Yun Le, and Bangcheng Han
Progress In Electromagnetics Research M, Vol. 55, 51-61, 2017
doi:10.2528/PIERM17010904

Abstract

A magnetically suspended permanent-magnet motor (MSPMM) system mainly consists of magnetic bearings(MBs), a motor and a rotor assembly. This paper focuses on the system analysis of an MSPMM used for a vacuum turbo-molecular pump (TMP). To ensure a normal levitation and rotation, characteristics of electromagnetic field of MBs and motor are studied. For MSPMM, loss is the main heat source. To ensure the safe and steady operation of MSPMM, loss of the MB and motor are calculated and analyzed by finite element method (FEM). For thermal aspects, temperature field is estimated. Based on these analyses, the system performance can be predictive. Considering the poor heat dissipation conditions in a vacuum environment, this system analysis including loss and temperature field is of great value for MSPMM design.

Citation


Xiaojun Ren, Yun Le, and Bangcheng Han, "System Electromagnetic Loss Analysis and Temperature Field Estimate of a Magnetically Suspended Motor," Progress In Electromagnetics Research M, Vol. 55, 51-61, 2017.
doi:10.2528/PIERM17010904
http://www.jpier.org/PIERM/pier.php?paper=17010904

References


    1. Jiang, W., et al., "Commutation analysis of brushless DC motor and reducing commutation torque ripple in the two-phase stationary frame," IEEE Transactions on Power Electronics, Vol. 32, No. 6, 4675-4682, 2017.
    doi:10.1109/TPEL.2016.2604422

    2. Kim, K.-T., S.-T. Lee, and J. Hur, "Diagnosis technique using a detection coil in BLDC motors with interturn faults," IEEE Transactions on Magnetics, Vol. 50, No. 2, 7021904, 2014.

    3. Schweitzer, G. and E. H. Maslen, Magnetic Bearings Theory, Design and Application to Rotating Machinery, Springer-Verlag, Berlin, 2009.

    4. Lee, T. and C. Liu, "Design and analysis of a new axial-field magnetic variable gear using pole-changing permanent magnets," Progress In Electromagnetics Research, Vol. 153, 23-32, 2015.

    5. Ren, X. J., Y. Le, and B. C. Han, "Asymmetric electromagnetic analysis and design of a permagnet biased axial magnetic bearings," Progress In Electromagnetics Research Symposium, 574-586, Shanghai, China, Aug. 2016.

    6. Tang, J., et al., "Low eddy loss axial hybrid magnetic bearing with gimballing control ability for momentum flywheel," J. Magn. Magn. Mater, Vol. 329, 12, 2013.

    7. Ren, X. J., et al., "Magnetic flux leakage modeling and optimization of a combined radial-axial hybrid magnetic bearing for DC motor," IET Electric Power Applications, 2016.

    8. Fang, S. H., et al., "Analysis and design of a high-speed permanent magnet characteristic actuator using eddy current effect for high-voltage vacuum circuit breaker," IET Electric Power Applications, Vol. 10, No. 6, 268-275, 2016.
    doi:10.1049/iet-epa.2015.0348

    9. Han, B., et al., "Modeling and analysis of coupling performance between passive magnetic bearing and hybrid magnetic radial bearing for magnetically suspended flywheel," IEEE Trans. Magn., Vol. 49, No. 10, 5356-5370, Oct. 2013.
    doi:10.1109/TMAG.2013.2263284

    10. Zhang, C., K. J. Tseng, T. D. Nguyen, and G. Zhao, "Stiffness analysis and levitation force control of active magnetic bearing for a partially-self-bearing flywheel system," International Journal of Applied Electromagnetics and Mechanics, Vol. 36, 229-242, 2011.

    11. Le, Y., et al., "Dynamic circuit model of a radial magnetic bearing with permanent magnet bias and laminated cores," International Journal of Applied Electromagnetics and Mechanics, Vol. 46, 43-60, 2014.

    12. Han, B., Q. Xu, and Q. Yuan, "Multiobjective optimization of a combined radial-axial magnetic bearing for magnetically suspended compressor," IEEE Transactions on Industrial Electronics, Vol. 64, No. 4, 2284-2293, 2016.

    13. Fang, J., C. Wang, and T. Wen, "Design and optimization of a radial hybrid magnetic bearing with separate poles for magnetically suspended inertially stabilized platform," IEEE Transactions on Magnetics, Vol. 50, No. 50, 8101011, May 2014.

    14. Si, M., X. Y. Yang, S. W. Zhao, and S. Gong, "Design and analysis of a novel spoke-type permanent magnet synchronous motor," IET Electric Power Applications, Vol. 10, No. 6, 571-580, 2016.
    doi:10.1049/iet-epa.2015.0432

    15. Barcaro, M., T. Pradella, and I. Furlan, "Low-torque ripple design of a ferrite-assisted synchronous reluctance motor," IET Electric Power Applications, Vol. 10, No. 5, 319-329, 2016.
    doi:10.1049/iet-epa.2015.0248

    16. Hou, Z., J. Huang, H. Liu, T. Wang, and L. Zhao, "Quantitative broken rotor bar fault detection for closed-loop controlled induction motors," IET Electric Power Applications, Vol. 10, No. 5, 403-410, 2016.
    doi:10.1049/iet-epa.2015.0440

    17. Prieto, D., et al., "Multi-physic analytical model for a saturated permanent magnet assisted synchronous reluctance motor," IET Electric Power Applications, Vol. 10, No. 5, 356-367, 2016.
    doi:10.1049/iet-epa.2015.0199

    18. Lim, M.-S., S.-H. Chai, and J.-P. Hong, "Design and iron loss analysis of sensorless-controlled interior permanent magnet synchronous motors with concentrated winding," IET Electric Power Applications, Vol. 8, No. 9, 349-356, 2014.
    doi:10.1049/iet-epa.2014.0005

    19. Azari, M. N. and M. Mirsalim, "Analytic modelling of a line-start permanent-magnet motor with slotted solid rotor," IET Electric Power Applications, Vol. 8, No. 7, 278-285, 2014.
    doi:10.1049/iet-epa.2014.0018

    20. Huber, T., W. Peters, and J. Böcker, "A low-order thermal model for monitoring critical temperatures in permanent magnet synchronous motors," 7th IET International Conference on Power Electronics, Machines and Drives (PEMD 2014), 1-6, 2014.

    21. Stipetic, S., D. Zarko, and M. Popescu, "Ultra-fast axial and radial scaling of synchronous permanent magnet machines," IET Electric Power Applications, Vol. 10, No. 7, 658-666, 2016.
    doi:10.1049/iet-epa.2016.0014

    22. Zhao, B., Application of Ansoft 12 in Engineering Electromagnetic Field, Water Power Press, Beijing, China, 2010 (in Chinese).

    23. Wang, T., X. Ouyang, L. Li, and X. Li, "Optimization of the five phase fault tolerant motor based on Ansoft simulation," IEEE/CSAA International Conference on Aircraft Utility Systems (AUS), 1035-1039, Beijing, China, Oct. 2016, DOI: 10.1109/AUS. 2016. 7748209.

    24. Aboura, F. and O. Touhami, "Integration of the hysteresis in models of asymmetric three-phase transformer: Finite-element and dynamic electromagnetic models," IET Electric Power Applications, Vol. 10, No. 7, 614-622, 2016.
    doi:10.1049/iet-epa.2015.0476

    25. Huang, Z. Y. and B. C. Han, "Effective approach for calculating critical speeds of high-speed permanent magnet motor rotor-shaft assemblies," IET Electric Power Applications, Vol. 9, No. 9, 628-633, 2015.
    doi:10.1049/iet-epa.2014.0503

    26. Han, B., Q. Xu, and S. Zheng, "Integrated radial/thrust magnetic bearing without thrust disk for a high-speed driving system," IET Electric Power Applications, Vol. 10, No. 4, 276-283, 2016.
    doi:10.1049/iet-epa.2015.0335

    27. Huang, Z., et al., "Mechanical stress and thermal aspects of the rotor assembly for turbo-molecular pumps," Vacuum, Vol. 129, 55-62, 2016.
    doi:10.1016/j.vacuum.2016.03.026

    28. Zhang, Z., L. Yu, L. Sun, L. Qian, and X. Huang, "Iron loss analysis of doubly salient brushless DC generators," IEEE Trans. Ind. Electron., Vol. 62, No. 4, 2156-2163, Apr. 2015.
    doi:10.1109/TIE.2014.2349875

    29. Huang, Z., J. Fang, X. Liu, and B. Han, "Loss calculation and thermal analysis of rotors supported by active magnetic bearings for high-speed permanent-magnet electrical machines," IEEE Trans. Ind. Electron., Vol. 63, No. 4, 2027-2035, Apr. 2016.