Search Results(14191)

0000-00-00
PIER
Vol. 36, 279-317
A Variable Metric Electrodynamics. Plane Waves
Bernard Jancewicz
Classical electrodynamics can be divided into two parts. In the first one, a need of introducing a plenty of directed quantities occurs, namely multivectors and differential forms but no scalar product is necessary. We call it premetric electrodynamics. In this part, principal equations of the theory can be tackled. The second part concerns solutions of the equations and requires establishing of a scalar product and, consequently, a metric. For anisotropic media two scalar products can be introduced depending on the electric permittivity and magnetic permeability tensors. In the case of plane electromagnetic waves both of them are needed because two constitutive equations are needed: one for the electric fields, the other for the magnetic field. We show which part of the description of plane electromagnetic waves is independent of scalar products, and where they become necessary.
A VARIABLE METRIC ELECTRODYNAMICS. PLANE WAVES
0000-00-00
PIER
Vol. 36, 265-278
Design of Dual-Frequency Microstrip Patch Antennas and Application for IMT-2000 Mobile Handsets
Y. J. Wang and C. Lee
Two major objectives are concerned in this paper. On one hand, a multiplicity of typical methodologies available for achieving dual-frequency operation for microstrip patch antennas are summarized and classified into three categories, based on their intrinsic mechanisms. On the other hand, by employing the dual-frequency solutions, microstrip patch antennas are applied to the mobile handsets of the third-generation IMT-2000 system. Two novel microstrip patch antennas with broadband property and miniaturized size have been proposed and discussed theoretically and experimentally. Only a single simply-slotted patch, either semi-disc or square, is introduced in each of the two probe-fed antennas. Both antennas exhibit the impedance bandwidths (return loss · −10 dB) of 25.6% and 34.4% respectively, which would be suitable for the practical application of the IMT-2000 mobile handsets.
DESIGN OF DUAL-FREQUENCY MICROSTRIP PATCH ANTENNAS AND APPLICATION FOR IMT-2000 MOBILE HANDSETS
0000-00-00
PIER
Vol. 36, 247-264
Electromagnetic Coupling Analysis of Transient Signal through Slots or Apertures Perforated in a Shielding Metallic Enclosure Using FDTD Methodology
Ya Wang , Wee Jin Koh , C. Lee and Kye See
The paper presents electromagnetic coupling of an electrical fast transient plane wave penetrating through slots or apertures perforated in one side of a shielding metallic enclosure. Numerous slots and apertures of different configurations and dimensions have been developed, which include a single slot of different length, a single aperture of different width, multiple-angular apertures of different geometry, multiple-cell aperture of different cell numbers, multiple thin slots, an aperture-cell array making up the whole side of the enclosure, and a miscellany case simulating a PC main frame. FDTD numerical method is applied to the EMI/EMC model, while time-domain outputs are converted to frequency-domain responses for further analyses using a FFT program. Practical conclusions and recommendations are drawn to aid shielding enclosure design and electromagnetic interference protection.
ELECTROMAGNETIC COUPLING ANALYSIS OF TRANSIENT SIGNAL THROUGH SLOTS OR APERTURES PERFORATED IN A SHIELDING METALLIC ENCLOSURE USING FDTD METHODOLOGY
0000-00-00
PIER
Vol. 36, 193-246
A Survey of Various Frequency Domain Integral Equations for the Analysis of Scattering from Three-Dimensional Dielectric Objects
Baek-Ho Jung , Tapan Kumar Sarkar and Y.-S. Chung
In this paper, we present four different formulations for the analysis of electromagnetic scattering from arbitrarily shaped three-dimensional (3-D) homogeneous dielectric body in the frequency domain. The four integral equations treated here are the electric field integral equation (EFIE), the magnetic field integral equation (MFIE), the combined field integral equation (CFIE), and the PMCHW (Poggio, Miller, Chang, Harrington, and Wu) formulation. For the CFIE case, we propose eight separate formulations with different combinations of expansion and testing functions that result in sixteen different formulations of CFIE. One of the objectives of this paper is to illustrate that not all CFIE are valid methodologies in removing defects, which occur at a frequency corresponding to an internal resonance of the structure. Numerical results involving the equivalent electric and magnetic currents, far scattered fields, and radar cross section (RCS) are presented for three canonical dielectric scatterers, viz. a sphere, a cube, and a finite circular cylinder, to illustrate which formulation works and which does not.
A SURVEY OF VARIOUS FREQUENCY DOMAIN INTEGRAL EQUATIONS FOR THE ANALYSIS OF SCATTERING FROM THREE-DIMENSIONAL DIELECTRIC OBJECTS
0000-00-00
PIER
Vol. 36, 179-192
Modeling of Bipolar Junction Transistor in FDTD Simulation of Printed Circuit Board
F. Kung and H. T. Chuah
A simple and efficient approximate method to incorporate nonlinear bipolar junction transistor (BJT) into Finite-Difference Time-Domain (FDTD) framework is presented. This method applies Taylor expansion on the nonlinear transport equations of the BJT based on Gummel-Poon model [5]. The results are two coupled one-step explicit finite difference schemes for the electromagnetic fields in the vicinity of the BJT, which can be solved easily. A simulation example is carried out for a power amplifier and the result compares well with the measurement. A two-step simulation scheme is introduced to hasten the process of reaching transient steady state. Finally, brief comments on treating the FDTD framework as a dynamical system is included. This perspective is useful for analyzing the stability of FDTD framework with nonlinear lumped elements.
MODELING OF BIPOLAR JUNCTION TRANSISTOR IN FDTD SIMULATION OF PRINTED CIRCUIT BOARD
0000-00-00
PIER
Vol. 36, 153-177
Validation and Numerical Convergence of the Hankel-Bessel and Mathieu Rigorous Coupled Wave Analysis Algorithms for Radially and Azimuthally --- Inhomogeneous, Elliptical, Cylindrical Systems
John Jarem
A Rigorous Coupled Wave Analysis (RCWA) algorithm for electromagnetic (EM) scattering from radially and azimuthally inhomogeneous material elliptical systems based on State Variable (SV) techniques and based on circular-cylindrical Hankel-Bessel expansion modes is developed for the first time. The algorithm in conjunction with the elliptical system RCWA algorithm [1], which was based on SV techniques and Mathieu expansion modes, is used to validate and study numerical convergence of both elliptical RCWA algorithms. The formulation of the SV, Hankel-Bessel elliptical algorithm is presented. Two numerical elliptical examples are studied in detail by both algorithms, a homogeneous one which consists of three different uniform materials located in three elliptical regions and an inhomogeneous one which consists of an azimuthal, dielectric, step profile which is located between two uniform material elliptical regions. In this paper EM field scattering from a step profile which possessed a much larger dielectric step profile difference than was studied in [1] is presented. Validation and numerical convergence data of the Hankel-Bessel and the Mathieu [1] RCWA algorithm is presented for the first time, both in plot figures and in tables, when different numbers of expansion modes were used, when different number of layers were used, and when different numbers of SV harmonics were used. Validation of the RCWA algorithms was further carried out for the homogeneous case, by using Mathieu expansion modes in all regions and was carried out by using Hankel-Bessel expansion modes and Mathieu expansion modes in different regions. Validation of the Hankel-Bessel and Mathieu [1] RCWA algorithms was observed to a high degree of accuracy. It was found for the numerical example tested, that the number of modes used in the RCWA algorithms needed to exceed a critical minimum value in order to obtain meaningful, accurate results, and after this critical number of modes was exceeded, that convergence occurred rapidly as the number of modes increased. It was also found that as the number of layers used in the algorithm increased that the numerical accuracy of the RCWA solution slowly increased.
VALIDATION AND NUMERICAL CONVERGENCE OF THE  HANKEL-BESSEL AND MATHIEU RIGOROUS COUPLED WAVE ANALYSIS  ALGORITHMS FOR RADIALLY AND AZIMUTHALLY --- INHOMOGENEOUS, ELLIPTICAL, CYLINDRICAL SYSTEMS
0000-00-00
PIER
Vol. 36, 139-152
The Electromagnetic Field Produced by a Horizontal Electric Dipole Over a Dielectric Coated Perfect Conductor
J. L. Tang and W. Hong
The analytical expressions for the electromagnetic field generated by a horizontal electric dipole over a dielectric coated perfect conductor are derived by transformation of integral path. From the expressions, it can be clearly observed that the excited field consists of the direct wave, reflected wave, trapped surface wave and lateral wave. The propagation wave number of trapped surface wave, which depends on electric parameters and thickness of the dielectric layer, is between the wave number k0 and k1.
THE ELECTROMAGNETIC FIELD PRODUCED BY A HORIZONTAL ELECTRIC DIPOLE OVER A DIELECTRIC COATED PERFECT CONDUCTOR
0000-00-00
PIER
Vol. 36, 121-137
Volterra Differential Constitutive Operators and Locality Considerations in Electromagnetic Theory
Dan Censor and Timor Melamed
Macroscopic Maxwell's theory for electrodynamics is an indeterminate set of coupled, vector, partial differential equations. This infrastructure requires the supplement of constitutive equations. Recently a general framework has been suggested, taking into account dispersion, inhomogeneity and nonlinearity, in which the constitutive equations are posited as differential equations involving the differential operators based on the Volterra functional series. The validity of such representations needs to be examined. Here it is shown that for such representations to be effective, the spatiotemporal functions associated with the Volterra differential operators must be highly localized, or equivalently, widely extended in the transform space. This is achieved by exploiting Delta-function expansions, leading in a natural way to polynomial differential operators. The Four-vector Minkowski space is used throughout, facilitating general results and compact notation.
0000-00-00
PIER
Vol. 36, 101-119
Electronic Beam Steering Using Switched Parasitic Smart Antenna Arrays
Pantelis Varlamos and Christos N. Capsalis
A method of designing smart antennas based on switched parasitic antenna arrays is presented in this paper. The direction of maximum gain can be controlled by a digital word, while the selection of element spacing and weighting is optimized using the method of genetic algorithms. Various results are presented to show how antennas of this type perform, outlining the advantages and limitations of their design.
ELECTRONIC BEAM STEERING USING SWITCHED PARASITIC SMART ANTENNA ARRAYS
0000-00-00
PIER
Vol. 36, 81-100
Self-Field ac Power Dissipation in High-Tc Superconducting Tapes and a Prototype Cable
S. A. Awan and S. Sali
The measured self-field AC power dissipation in superconducting BiSrCaCuO-2223/Ag tapes and a prototype cable is cable is compared with theoretical models. A brief overview of the theoretical background for AC loss calculations in superconductor tapes with different geometrical shapes is also discussed. New models for the harmonic components of the fundamental frequency and the current dependent non-linear inductance are also derived. It is shown that the latter models can be used to estimate current distribution and the variation of flux penetration in superconducting tapes. Two separate experimental apparatus were designed and constructed for measurements on tapes and prototype cable systems. The observed losses in tapes are reasonably well described by models based on the Critical State Model (CSM). In contrast, the measured losses in the prototype cable are found to be a factor of approximately two higher the predicted values. Further investigations showed that this may be due to inhomogeneous contact resistance between individual tapes and the current joints and the variation in critical current density (JC) distribution between tapes. The significance of current dependence of the loss component, inductive quadrature component, phase error in measurements and the definition of the critical current in the prototype cable are also discussed.
SELF-FIELD AC POWER DISSIPATION IN HIGH-TC SUPERCONDUCTING TAPES AND A PROTOTYPE CABLE
0000-00-00
PIER
Vol. 36, 61-79
The Low-Frequency Electric Fields Induced in a Spherical Cell Including Its Nucleus
Ronold W. P. King and Dionisios Margetis
After a review of work leading to the determination of the electric field induced in the human body when exposed to the electromagnetic field near an extremely-low-frequency high-voltage transmission line, attention is directed to a spherical cell exposed to the electric field in the body. Following a brief discussion of the potential biological significance of the study, the electric field acting on the surface of the cell and the electric field induced by it in the region between the outer cell membrane and the nuclear envelope are determined analytically, as is the field induced in the nucleus. It is shown, as an example, that when the body is exposed to a 60-Hz axial electric field of 2100 V/m, the field induced in the nucleus of a cell in the body is 0.27 nV/m when the radius of the nucleus is half that of the cell. The biologically interesting electric field along the outer surface of the nuclear envelope is in this case 2.7 μV/m. The simple analytical formulas can be applied to other values of the parameters, such as varying sizes of the nucleus (see Figure 2), and to power-line fields of different magnitude.
THE LOW-FREQUENCY ELECTRIC FIELDS INDUCED IN A SPHERICAL CELL INCLUDING ITS NUCLEUS
0000-00-00
PIER
Vol. 36, 1-19
Optimal Synthesis of Line Source Antennas Based on Rhodes Distributions
Julio C. Bregains , J. A. Rodriguez and F. Ares
In this paper we show that by means of an appropriate optimization technique the zeros of Rhodes radiation patterns can be perturbed so as to improve or modify pattern and/or the aperture distribution characteristics without altering the behaviour of the excitation amplitude distribution at the ends of the aperture. The examples presented include symmetric and asymmetric shaped beams, sum patterns with individually controlled side lobe heights, shaped beams generated by real excitations, and sum pattern aperture distributions that are smoother than the original Rhodes distribution.
OPTIMAL SYNTHESIS OF LINE SOURCE ANTENNAS BASED ON RHODES DISTRIBUTIONS
0000-00-00
PIER
Vol. 35, 315-334
Numerical Studies of Left Handed Metamaterials
Christopher D. Moss , Tomasz M. Grzegorczyk , Y. Zhang and Jin Au Kong
We use the three dimensional Finite Difference Time Domain (FDTD) technique to study metamaterials exhibiting both negative permittivity and permeability in certain frequency bands. The structure under study is the well-known periodic arrangement of rods and split-ring resonators, previously used in experimental setups. The three parameters we study are the transmission coefficient of a slab, the phase variation of the propagating fields within the metamaterial, and the refraction of a wave through a prism. To our knowledge, this is the first time that the last two parameters are studied rigorously using a numerical method. The results of this work show that fields propagating inside the metamaterial with a forward power direction exhibit a backward phase velocity and negative index of refraction.
NUMERICAL STUDIES OF LEFT HANDED METAMATERIALS
0000-00-00
PIER
Vol. 35, 299-314
Electromagnetic Pulse Propagation in Dispersive Media
Pierre Hillion
We first consider the mathematical theory of boundaryinitial value problems for Maxwell's equations with as illustration, an extensive discussion of 1D-problems, Then, with the objective to investigate electromagnetic pulse propagation in dispersive media, we analyse how to translate electromagnetic processes which take place in a bounded domain of space-time into a boundary-initial value problem of Maxwell's equations, still focusing on 1D-problems.
0000-00-00
PIER
Vol. 35, 287-297
Computation of Scattering from Anisotropically Coated Bodies Using Conformal FDTD
H.-X. Zheng , X.-Q. Sheng and Edward Yung
A conformal FDTD approach is developed to compute scattering from anisotropically coated bodies. Comparisons between the standard and conformal FDTDs are numerically carried out to demonstrate the advantages of the conformal FDTD. Scattering of anisotropic dielectric sphere is computed and compared with the analytical results to further validate the developed approach. Several new results of scattering by anisotropically coated bodies are also given in the paper.
COMPUTATION OF SCATTERING FROM ANISOTROPICALLY COATED BODIES USING CONFORMAL FDTD
0000-00-00
PIER
Vol. 35, 271-286
Propagation of Electromagnetic Waves in a Slab with Negative Permittivity and Negative Permeability
Y. Zhang , Tomasz M. Grzegorczyk and Jin Au Kong
In this paper, we study the electromagnetic fields propagating through a slab which permittivity and permeability are simultaneously negative. We show that symmetry properties of the wave solution remove all ambiguity in the choice of the sign of the wave numbers inside the slab. Upon developing the Green's functions in terms of plane waves, growing "evanescent" waves in the direction of power flow are shown to exist inside the slab. As an illustration, the perfect imaging property of a slab where ²1 = −²0 and μ1 = −μ0 is verified.
PROPAGATION OF ELECTROMAGNETIC WAVES IN A SLAB WITH NEGATIVE PERMITTIVITY AND NEGATIVE PERMEABILITY
0000-00-00
PIER
Vol. 35, 251-269
Model of Dielectric Constant of Bound Water in Soil for Applications of Microwave Remote Sensing
Dmitriy A. Boyarskii , Vasiliy V. Tikhonov and N. Yu. Komarova
The paper suggests a model of dielectric properties of bound water in wet soils. The application of the model to the description of dielectric and radiophysical properties of wet soils in microwave electromagnetic range is considered. The comparisons of theoretical and experimental dielectric constants provided show good reliability of the suggested model.
MODEL OF DIELECTRIC CONSTANT OF BOUND WATER IN SOIL FOR APPLICATIONS OF MICROWAVE REMOTE SENSING
0000-00-00
PIER
Vol. 35, 217-250
First-Order Material Effects in Gyromagnetic Systems
Dan Censor and Martin D. Fox
In an attempt to bridge the gap between theory and applications, this paper brings together a few diverse subjects, and presents them as much as possible in self-contained form. A general perturbation method is developed for calculating the first order effects in quite general bi-anisotropic materials. The advantage of this approach is the feasibility of generating solutions of the Maxwell equations for the complicated media, in terms of well-known solutions for simple media. Specifically, the present study was motivated by a need to provide a theoretical framework for polarimetric glucometry methods, presently under investigation, in the hope of gaining better understanding of the systems and their limitations, as well as suggesting new configurations for acquiring better data. To that end, we chose to analyze gyromagnetic effects in lossless magneto-optical systems. Some representative examples have been chosen, and the obtained results, for various situations involving plane and spherical waves, are discussed. It is shown that the specific configuration of the magnetic fields affect the solutions. Generally speaking, the magnetic fields create new multipoles in the resultant wave fields. Another interesting feature of the present approach is the fact that we get the elementary Faraday rotation effect without resorting to a pair of two oppositely oriented circularly polarized waves, as usually done. Consequently we are able to discuss explicitly complicated situations involving non-planar waves and various external magnetic fields. The penalty is of course the restricted validity of the model to small non-isotropic effects.
FIRST-ORDER MATERIAL EFFECTS IN GYROMAGNETIC SYSTEMS
0000-00-00
PIER
Vol. 35, 183-216
Excitation and Reception of Electromagnetic, Magnetostatic and Spin Waves in Ferrite Films
S. V. Zagriadski and S. Choi
The paper presents a new universal formulation of electromagnetic fields in microwave ferrite-dielectric waveguiding structures from the given magnetic field distribution of an external source. The solution is derived from the linearized Landau-Lifshits equation using an orthogonality condition for eigenwaves of a magnetization. The magnetization excited in ferrite is obtained in an electrodynamic, magnetostatic or dipole-exchange approximation, depending on the approximation used for eigenwaves. Results are applied for the formulation and the analytical solution of self-consistent electrodynamic problems of an excitation and a reception of waves in ferrite films by transmission lines of an arbitrary type. Numerical calculations are performed for filters and delay lines on the base of symmetric strip-lines using surface and forward volume magnetostatic waves in ferrite films.
EXCITATION AND RECEPTION OF ELECTROMAGNETIC, MAGNETOSTATIC AND SPIN WAVES IN FERRITE FILMS
0000-00-00
PIER
Vol. 35, 165-182
A Spatial-Domain Method of Moments Analysis of a Cylindrical-Rectangular Chirostrip
L.-W. Li , T.-X. Zhao , M.-S. Leong and Tat Yeo
In this paper, a spatial-domain Galerkin's procedure in Method of Moments is applied to analyse a cylindrical-rectangular chirostrop antenna. It is assumed that a single-layer chiral substrate is wrap-fabricated around a conducting core-cylinder and that a perfectly conducting and electrically thin rectangular-cylindrical microstrip patch antenna is mounted on the surface of the chiral substrate. By imposing the boundary conditions on the multiple interfaces and applying the scattering superposition method, a complete expression of dyadic Green's functions (DGFs) has been obtained and the current distribution over the cylindrical rectangular chirostrip antenna has been determined. Various radiation patterns due to such a microstrip antenna in the presence of a chiral substrate are obtained and compared with those in the presence of an achiral substrate, so as to gain physical insight into effects of the chirostrip.
A SPATIAL-DOMAIN METHOD OF MOMENTS ANALYSIS OF A CYLINDRICAL-RECTANGULAR CHIROSTRIP