PIER M
 
Progress In Electromagnetics Research M
ISSN: 1937-8726
Home | Search | Notification | Authors | Submission | PIERS Home | EM Academy
Home > Vol. 52 > pp. 111-118

ELECTROMAGNETIC INTERFERENCE (EMI) SHIELDING PERFORMANCE OF THE TERNARY COMPOSITE BASED ON BAFE12O19, MWCNT AND PANI AT THE KU-BAND

By M. H. Zahari, B. H. Guan, E. M. Cheng, M. F. Che Mansor, and H. A. Rahim

Full Article PDF (576 KB)

Abstract:
A ternary composite, based on the M-type hexagonal barium ferrite, BaFe12O19, conducting polymer, polyaniline (PANI), carbon allotrope, and multi-walled carbon nanotube (MWCNT), was prepared through a facile in-situ polymerization process. The structural properties of the synthesized composite were characterized through XRD and FESEM analysis. PANI particles were found to be able to coat on BaFe12O19 and MWCNT surfaces. The increased MWCNT wt% loading within the composite resulted in the increase of the electrical conductivity with values as high as 2.0320 S/m for sample PBM5 (25wt% MWCNT). The composite inherited the salient properties of its respective components to achieve optimum values of shielding effectiveness. The highest value of SEA recorded was 42.37 dB at 17.60 GHz. The significantly larger magnitudes of SEA than SER suggest that the mechanism of shielding for all synthesized composites are through absorption.

Citation:
M. H. Zahari, B. H. Guan, E. M. Cheng, M. F. Che Mansor, and H. A. Rahim, "Electromagnetic Interference (EMI) Shielding Performance of the Ternary Composite Based on BaFe 12O19, MWCNT and PANI at the Ku-Band," Progress In Electromagnetics Research M, Vol. 52, 111-118, 2016.
doi:10.2528/PIERM16100402

References:
1. Tong, X. C., Advanced Materials and Design for Electromagnetic Interference Shielding, Taylor & Francis, 2008.
doi:10.1201/9781420073591

2. Xu, P., X. Han, and M. Wang, "Synthesis and magnetic properties of BaFe12O19 hexaferrite nanoparticles by a reverse microemulsion technique," The Journal of Physical Chemistry C, Vol. 111, 5866-5870, 2007.
doi:10.1021/jp068955c

3. Liu, J., P. Liu, X. Zhang, D. Pan, P. Zhang, and M. Zhang, "Synthesis and properties of single domain sphere-shaped barium hexa-ferrite nano powders via an ultrasonic-assisted co-precipitation route,", Ultrasonics Sonochemistry, 2014.

4. Hibst, H., "Hexagonal ferrites from melts and aqueous solutions, magnetic recording materials," Angewandte Chemie International Edition in English, Vol. 21, 270-282, 1982.
doi:10.1002/anie.198202701

5. Lotgering, F. K., P. R. Locher, and R. P. van Stapele, "Anisotropy of hexagonal ferrites with M, W and Y structures containing Fe3+ and Fe2+ as magnetic ions," Journal of Physics and Chemistry of Solids, Vol. 41, 481-487, 1980.
doi:10.1016/0022-3697(80)90178-X

6. Albanese, G., A. Deriu, and S. Rinaldi, "Sublattice magnetization and anisotropy properties of Ba3Co2Fe24O41 hexagonal ferrite," Journal of Physics C: Solid State Physics, Vol. 9, 1313, 1976.
doi:10.1088/0022-3719/9/7/023

7. Chiang, J.-C. and A. G. MacDiarmid, "`Polyaniline': Protonic acid doping of the emeraldine form to the metallic regime," Synthetic Metals, Vol. 13, 193-205, 1986.
doi:10.1016/0379-6779(86)90070-6

8. Rout, T. K., G. Jha, A. K. Singh, N. Bandyopadhyay, and O. N. Mohanty, "Development of conducting polyaniline coating: A novel approach to superior corrosion resistance," Surface and Coatings Technology, Vol. 167, 16-24, 2003.
doi:10.1016/S0257-8972(02)00862-9

9. McAndrew, T. P., S. A. Miller, A. G. Gilicinski, and L. M. Robeson, "Poly (aniline) in corrosion resistant coatings," American Chemical Society, Washington, DC, United States, 1996.

10. Han, M. and L. Deng, "High frequency properties of carbon nanotubes and their electromagnetic wave absorption properties," Carbon Nanotubes Applications on Electron Devices, J. M. Marulanda, editor, InTech, 2011.

11. Qin, F. and C. Brosseau, "A review and analysis of microwave absorption in polymer composites filled with carbonaceous particles," Journal of Applied Physics, Vol. 111, 061301, 2012.
doi:10.1063/1.3688435

12. Li, Y., Y. Huang, S. Qi, L. Niu, Y. Zhang, and Y. Wu, "Preparation, magnetic and electromagnetic properties of polyaniline/strontium ferrite/multiwalled carbon nanotubes composite," Applied Surface Science, Vol. 258, 3659-3666, 2012.
doi:10.1016/j.apsusc.2011.12.001

13. Goldman, A., Modern Ferrite Technology, Springer Science & Business Media, 2006.

14. Rana, U., et al., "Aromatic bi-, tri- and tetracarboxylic acid doped polyaniline nanotubes: Effect on morphologies and electrical transport properties," Journal of Materials Chemistry C, Vol. 2, 3382-3389, 2014.
doi:10.1039/c3tc32152e

15. Nalwa, H. S., Handbook of Organic Conductive Molecules and Polymers, Volume 4, Conductive Polymers: Transport, Photophysics and Applications, Wiley, 1997.

16. Saini, P., V. Choudhary, B. P. Singh, R. B. Mathur, and S. K. Dhawan, "Enhanced microwave absorption behavior of polyaniline-CNT/polystyrene blend in 12.4-18.0 GHz range," Synthetic Metals, Vol. 161, 1522-1526, 2011.
doi:10.1016/j.synthmet.2011.04.033

17. Phan, C. H., M. Mariatti, and Y. H. Koh, "Electromagnetic interference shielding performance of epoxy composites filled with multiwalled carbon nanotubes/manganese zinc ferrite hybrid fillers," Journal of Magnetism and Magnetic Materials, Vol. 401, 472-478, 2016.
doi:10.1016/j.jmmm.2015.10.067

18. Wang, Z., G. Wei, and G. L. Zhao, "Enhanced electromagnetic wave shielding effectiveness of Fe doped carbon nanotubes/epoxy composites," Applied Physics Letters, Vol. 103, 183109, 2013.
doi:10.1063/1.4828356


© Copyright 2010 EMW Publishing. All Rights Reserved