Fragment structure should find its application in acquiring high isolation between multiple-input multiple-output (MIMO) antennas. By gridding a design space into fragment cells, a fragment-type isolation structure can be constructed by metalizing some of the fragment cells. For MIMO isolation design, cells to be metalized can be selected by optimization searching scheme with objectives such as isolation, return losses, and even radiation patterns of MIMO antennas. Due to the exibility of fragment-type isolation structure, fragment-type structure has potentials to yield isolation higher than canonical isolation structures. In this paper, multi-objective evolutionary algorithm based on decomposition combined with genetic operators (MOEA/D-GO) is applied to design fragment-type isolation structures for MIMO patch antennas and MIMO PIFAs. It is demonstrated that isolation can be improved to different extents by using fragment-type isolation design. Some technique aspects related to the fragment-type isolation design, such as effects of fragment cell size, design space, density of metal cells, and efficiency consideration, are further discussed.

This article proposes a new design of wideband wide beam microstrip like antenna (MLA) in X-band (8-12 GHz) overcoming the limitations of conventional MLA design. The waveguide is filled with a dielectric material, which is shaped beyond the waveguide aperture as a pyramidal structure. This helps in achieving the size reduction of the waveguide and matching of aperture admittance over the complete operational band. Also a vertical electric dipole feed design is proposed to excite MLA and match the source and load admittances. The input reflection coefficient observed over the complete band is better than -10 dB. The measured gain and cross polarized levels of antenna achieved are better than 3 dBi and -18 dB across the bandwidth, respectively. The measured and simulated results are in good agreement.

This article presents a comprehensive review of the research carried out on Dielectric Resonator Antennas (DRAs) over the last three decades. Dielectric resonator antennas (DRAs) have received increased attention in various applications due to their attractive features in terms of high radiation efficiency, light weight, small size and low profile. Over last decades, various bandwidth enhancement techniques have been developed for DRAs. In this article, the attention is focused on a type of DRAs that can offer multi-resonance frequencies and these frequencies can be merged into a broad band. In order to effectively review design techniques, DRAs in this article are categorized into three types, broadband, ultra-wideband (UWB) and multiband. The latest developments in DRAs are discussed in the limited scope of this article.

A Multiple Input Multiple Output (MIMO) antenna consisting of two 90° angularly separated semicircular monopoles with steps for Bluetooth, Wi-Fi, Wi-MAX and UWB applications is proposed. Initially, an array of two coplanar circular monopoles with element separation of 25 mm is investigated. In this configuration, mutual coupling is < -5 dB and < -10 dB over 2 GHz-3 GHz and 3 GHz-10.6 GHz, respectively. Mutual coupling is reduced by using 90° angularly separated semicircular monopoles. With semicircular configuration, though the mutual coupling is improved, impedance bandwidth is reduced due to reduction in electrical length. A step like structure is introduced in the semicircular monopoles, and ground plane is modified and extended between the two elements to improve the impedance bandwidth and mutual coupling. Impedance bandwidth from 2.0 GHz-10.6 GHz with S₂₁ < -20 dB and -14 dB is achieved over 3.1 GHz-10.6 GHz and 2.0-3.1 GHz, respectively. The antenna is fabricated using 46 mm × 37 mm RT Duroid substrate. Measurement results agree with the simulation os. Radiation patterns are stable, and correlation coefficient is < 0.02 over 2.0-10.6 GHz.

A novel method of the aerosolized gene delivery is proposed, and its feasibility is computationally analyzed. Aerosolized DNA or siRNA attached to magnetic particles can be accelerated using ponderomotive force to high velocities in a pulsed magnetic field of a solenoid and efficiently delivered to cell culture or to the lung epithelium. The proposed noninvasive method of intra-cellular gene delivery can be considered as a combination of principles of classical high-pressure air jet gene delivery with magnetophoresis.

The visibility distribution, which is related to the configuration of stations, can be categorized into different features, each having different levels of data number density. A computationally efficient multi-feature image reconstruction algorithm, well adapted for next-generation telescopes, is proposed based on this observation, which is more flexible to handle massive amount of visibility data expected in the future. In reconstructing the M87 image with the visibility data simulated on the Low-Frequency Array (LOFAR), this algorithm turns out to be a few hundreds to one thousand times faster and is more resilient to noises than the conventional algorithms.

Decoupling networks (DNs) have frequently been used to obtain high isolation performance between coupled antennas in multiple-input multiple-output (MIMO) systems due to their advantage of spatial efficiency, which is particularly important for mobile devices. However, conventional DNs suffer from narrowband limitations. In this paper, a broadband decoupling technique is proposed that broadens the isolation bandwidth using a parallel resonant point. A 1.95 GHz MIMO antenna system with 460 MHz of bandwidth (fractional bandwidth, FBW = 23.6%) is designed and measured using the scattering parameters. The isolation is found to be better than -15 dB, while the reflection coefficient is better than -6 dB. Furthermore, the antenna efficiency and envelope correlation coefficient (ECC) are evaluated in a reverberation chamber.

A real time, low complexity algorithm is developed to steer a planar patch antenna array beam to the maximum received signal strength (RSS) direction for communication link enhancement. The beam steering towards the maximum incoming signal direction is based on an iterative technique utilizing a set of RSS measurements taken from specific locations in the search space, these locations collectively form an ellipse. The algorithm is denoted as ``elliptical peeking''. It was simulated for a flying unmanned aerial vehicle (UAV) as the vehicle tries to identify the maximum signal strength incoming direction of a stationary ground signal and it was tested on an embedded platform to validate its low demand for computational power. Such an algorithm is suitable for autonomous platforms due to its simplicity and low cost.

In this paper, a printed Vivaldi antenna with two pairs of eye-shaped slots is proposed for UWB applications. By using two pairs of eye-shaped slots, the side lobe levels of the radiation pattern are reduced, and the antenna gain is improved at low frequencies. To illustrate the effectiveness of the proposed design, a prototype of the proposed antenna is fabricated and measured. Experimental results show that the proposed antenna presents a measured impedance bandwidth, defined by |S₁₁| < -10 dB, from 3 to 12.8 GHz with a compact size (36 mm×36 mm). Good unidirectional radiation characteristics with a front-to-back ratio better than 10 dB are also achieved. The measured gain is better than 3.7 dBi in the operating frequency band. In addition, the measured group delay of the proposed antenna is around 1.2 ns with a variation less than ± 0.5 ns.

This study investigates snowfall detectability and snowfall rate estimation with NASA's CloudSat through the first evaluation of its newly released 2C-16 SNOW-PROFILE products using the National Mosaic and Multisensor QPE System (NMQ) snowfall products. The primary focus is on the detection and estimation of 18 surface snowfall. The results show that the CloudSat product has good detectability of light snow (snow water equivalent less than 1 mm/h) but degrades in moderate and heavy snow (heavier than 1 mm/h). The analysis suggests that the new 2C-SNOW-PROFILE algorithm is insufficient in correcting signal losses due to attenuation. Its underestimation is well correlated to snowfall intensity. Issues of sensitivity and data sampling with ground radars, which may affect the interpretation of the results, are also discussed. This evaluation of the new 2C-SNOW-PROFILE algorithm provides guidance for applications of the product and identifies particular error sources that can be addressed in future versions of the CloudSat snowfall algorithm.

A novel feed network based on the microstrip/slotline transition is proposed in this paper. This feed network not only has ultra-wide impedance bandwidth but also can improve space utilization and make the design of antenna array easier. Then an ultra-wideband (UWB) antenna array with four elements fed by the network is designed. The antenna array is simulated, manufactured and measured. The results show that: the impedance bandwidth with return loss under -10 dB is 88.76%, from 2.35 GHz to 6.1 GHz. Within the impedance bandwidth, the radiation performance is satisfactory, and the gain of the array is 2.1-7.1 dB, higher than that of the element. The cross-polarization level of the array is lower than -20 dB, just as the element. A reasonable agreement of results is achieved between simulation and measurement.

In optical region, the scattering center model is very useful in scattering analysis, target recognition and data compression. The method based on Hough transformation performs well in most cases. However, the algorithm extracts the scattering centers one by one via a clean method, which is time consuming. To solve this problem, a novel method is proposed in this paper to extract the scattering centers. By searching the estimated 1D scattering centers, the candidate positions for 3D scattering centers are extracted. Then the candidates are discriminated by a clustering based procedure. By employing the new algorithm, the 3D scattering centers can be extracted simply and the clean step is unnecessary, which makes the procedure efficient. The experiment results of the high-frequency-electro-magnetic data demonstrate the performance of the proposed method.

A simple and effective method of bandwidth enhancement for the printed meander line antenna (MLA) is proposed. This approach is characterized by symmetrically printing two meandering sections on both sides of a dielectric substrate and connecting them via shorting pins at the bottom of meandering sections, which are connected to a capacitive stripe for impedance matching. The illustrative equivalent circuit and the corresponding principle of bandwidth enhancement of this double-layered MLA are presented. The measured results of these double-layered and single-layered MLAs manifest the validity of our design approach.

In this paper, a rectangular metallic monopole antenna with normal rectangular stubs is presented for application in ultra-wide band communication systems. It is shown by computer simulations (HFSS and CST) and actual fabrication and measurement that the addition of protruding normal metallic stubs lead to the increase of impedance band width. The optimum design of geometrical dimensions of the antenna (consisting of the monopole plate and stubs) achieves up to 10 dB return loss in the UWB (3.1-10.6 GHz) frequency range. The radiation efficiency of antenna is better than 95%. Furthermore, the antenna provides linear polarization, with quite low cross-polarization levels.

A generalization propagator method (GPM) is presented. It is the extension of traditional propagator method (PM). In order to make full use of the received data, many propagators are structured according to different block structures of array manifold. By these propagators, a high order matrix is obtained in a symmetric mode, and it is orthogonal with array manifold. Based on this matrix, a generalization spectral function is obtained to solve the problem of direction-of-arrival (DOA) estimation by spectral peak searching. Moreover, in order to avoid spectral peak searching, a generalization root-propagator method (GRPM) is also proposed, and shows excellent estimation precision. Numerical simulations demonstrate the performance of the proposed method.

A novel wideband sleeve antenna with capacitive annulus for wireless communication applications is presented in this paper. A sleeve structure is introduced to improve the impedance bandwidth through exciting a new resonate point. By loading capacitive annulus at the center of sleeve, an impedance bandwidth enhancement is achieved at the upper frequency band. The measured impedance bandwidth for VSWR≤2 about 142.8% ranging from 1.01 to 6.06 GHz is achieved, and monopole-like radiation patterns are presented. A prototype has been fabricated and tested, and the experimental results validate the design procedure. It is sufficient for accommodating recent wireless communication services such as DCS1800, PCS1900, IMT2000, WLAN, WiMAX2350/3500, etc.

In this paper, a quad-antenna system for laptop computers is studied. Because two dual-antenna systems can construct a quad-antenna system, the dual-antenna systems in the open literature are utilized. The mutual coupling between the two dual-antenna systems is analyzed and reduced. To validate the design of a quad-antenna system, the quad-antenna system, consisting of two dual-antenna systems proposed in the open literature and a decoupling element, is fabricated and tested. Its measured -10 dB impedance bandwidths are 200 MHz (2.33-2.52 GHz) and 1.62 GHz (4.5-6.12 GHz). The measured mutual couplings are below -15.5/-19 dB at the 2.4- and 5.2/5.8-GHz WLAN bands, respectively. The measured gains are better than 2.4/3.9 dBi with efficiencies higher than 70%/72% at the two bands, respectively. The envelop correlation coefficient is evaluated based on the measured results.

It is well known that MUltiple SIgnal Classification (MUSIC)-type algorithm produces a good result for the imaging of thin dielectric inhomogeneity in full-view inverse scattering problems. In contrast, it yields a poor result in limited-view inverse scattering problems. In this paper, we verify the reason for the above by establishing a relationship between a MUSIC-type imaging function and the Bessel functions of the integer order of the first kind. This verification is based on the asymptotic expansion formula for thin dielectric inhomogeneity. Various numerical examples are shown for confirming our verification.

Two novel short tapered leaky wave antenna (LWA) designs with a complementary split ring resonator (CSRR) structure are proposed in this paper. The CSRR structure is positioned at 1/4λ_g away from the open-end edge of the LWA. For one of the antenna designs, the CSRR is placed at the ground plane; for the other one, the CSRR is placed on the antenna plane. The reflected wave caused by the open-end edge of the LWA is cancelled by the reflected wave caused by the CSRR, thus, the back lobe can be effectively suppressed. The length of these two short tapered LWAs with CSRR design is only 1.2λ_g at 4.3 GHz. According to the measurement results, the impedance bandwidth is 650 MHz for 7 dB return loss, which covers the range from 4.3 GHz to 4.95 GHz. The back lobe can be suppressed effectively about more than 12 dB at the whole operating frequency band. The scanning range of the main beam is about 34˚, which covers the scanning angle from 10˚to 44˚.

The present article expounds a formalism for the representation of multi-port non-reciprocal antenna structures in an arbitrary surrounding linear medium. In the most general approach the antenna, the waveguides connected to it, as well as the surrounding medium may contain any distribution of anisotropic magneto-electric media. Furthermore, an arbitrary external field is taken into consideration which need not be of plane wave form. A reciprocally adjoint system is introduced to derive relations which describe the antenna under such general conditions. Since the antenna may contain media which prohibit the use of ordinary scattering, admittance or impedance matrices, an approach by means of generalized scattering matrices, or by a generalized admittance and a generalized impedance matrix, is applied. This leads to an n-port description of the whole waveguide-antenna environment where transfer operators render the interaction between the external field and the state of the ports. These operators are the generalizations of effective length vectors. For its importance the case of reciprocal reflection-symmetric waveguides is treated in detail, including a derivation of the consequences of abstract network reciprocity and complex power relation for voltage-current representations. The formalism is adequate for the description of radar and radio astronomy antennas, in particular when wave polarization plays a crucial role and/or a magnetized plasma environment is present (which is responsible for anisotropy and non-reciprocal conditions).