volume | PIER Journals

Abstract

In this paper, design, fabrication, and testing of Radio Frequency Identification (RFID) antennas for the European Telecommunications Standards Institute (ETSI) and Federal Communications Commission (FCC) bands are discussed. The designs proposed in this paper are for UHF RFID tag that conforms to EPCglobal C1G2 1.2.0. The exceptional characteristics of the RFID are investigated in terms of antenna-IC matching and radiation efficiency. The proposed RFID antennas have been fabricated on 5 mil thick Flexible Copper Clad Laminate and the read range of the proposed RFID antennas is experimentally tested. Measured free air read range of all proposed designs is over 4 m. The performance of the tag antenna design affixed to various objects is also tested with read range measurements. The results show that the antenna designs can be used for tagging cardboard and plastic objects.

1. Finkenzeller, K., RFID Handbook: Fundamentals and Applications in Contactless Smart Cards and Identification, John Wiley & Sons Ltd., 2003.

2. Curty, J.-P., M. Declercq, C. Dehollain, and N. Joehl, Design and Optimization of Passive RFID System, Springer, New York, USA, 2007.

3. Ukkonen, L., M. Schaffrath, D. W. Engels, L. Sydanheimo, and M. Kivikoski, "Operability of folded microstrip patch-type tag antenna in the UHF RFID bands within 865-928 MHz," IEEE Antennas and Wireless Propagation Letters, Vol. 5, 414-417, 2006.
doi:10.1109/LAWP.2006.883085 Google Scholar

4. Rao, K. V. S., P. V. Nikitin, and S. F. Lam, "Antenna design for UHF RFID tags: A review and a practical application," IEEE Transactions on Antennas and Propagation, Vol. 53, No. 12, 3870-3876, 2005.
doi:10.1109/TAP.2005.859919 Google Scholar

5. Kwon, H. and B. Lee, "Meander line RFID tag at UHF band evaluated with radar cross sections," APMC Proceedings, 2005. Google Scholar

6. Diugwu, C. A., J. C. Batchelor, R. J. Langley, and M. Fogg, "Planar antenna for passive radio frequency identification [RFID] tags," IEEE Africon, 2004. Google Scholar

7. Son, H. W. and C. S. Pyo, "Design of RFID tag antennas using an inductively coupled feed," Electronics Letters, Vol. 41, No. 18, 2005.
doi:10.1049/el:20051536 Google Scholar

8. Gaetano, M., "The art of UHF RFID antenna design: Impedance --- Matching and size reduction techniques," IEEE Antennas and Propagation Magazine, Vol. 50, No. 1, 66-79, 2008.
doi:10.1109/MAP.2008.4494504 Google Scholar

9. Loo, C. H., K. Elmahgoub, F. Yang, A. Elsherbeni, D. Kajfez, A. Kishk, and T. Elsherbeni, "Chip impedance matching for UHF RFID tag antenna design," Progress In Electromagnetics Research, Vol. 81, 359-370, 2008.
doi:10.2528/PIER08011804 Google Scholar

10. Nikitin, P. V. and K. V. S. Rao, "Antennas and propagation in UHF RFID systems," 2008 IEEE International Conference on RFID The Venetian, 277-288, Las Vegas, Nevada, USA, Apr. 16-17, 2008. Google Scholar

11. Dobkin, D. M. and S. M. Weigand, "Environmental effects on RFID tag antennas," Proc. IEEE Int. Microw. Symp., Jun. 2005. Google Scholar

12. Griffin , J. D., G. D. Durgin, A. Haldi, and B. Kippelen, "RF tag antenna performance on various materials using radio link budgets," IEEE Antennas and Wireless Propagation Letters, Vol. 5, 2006.
doi:10.1109/LAWP.2006.874072 Google Scholar

Dr. Arun Kumar

Dr. Davinder Parkash

Prof. Machavaram Kartikeyan