volume | PIER Journals

Abstract

This paper gives an overview of various electric machines for application to renewable energy harvesting, and reveals the corresponding challenges and research opportunities. After introducing various renewable energies and electric machines, the concept of renewable energy machines is coined. Then, the existing machines, including the DC, induction and synchronous types, for renewable energy harvesting are challenged. Consequently, research opportunities of advanced machines, including the stator-permanent magnet (PM), direct-drive PM and magnetless types, are elaborated. Finally, both near-term and long-term renewable energy machines are identified especially the emerging stator-PM, vernier PM and stator doubly fed doubly salient types.

1. Esram, T. and P. L. Chapman, "Comparison of photovoltaic array maximum power point tracking techniques," IEEE Transactions on Energy Conversion, Vol. 22, No. 2, 439-449, 2007.
doi:10.1109/TEC.2006.874230 Google Scholar

2. Yu, C. and K. T. Chau, "Thermoelectric automotive waste heat energy recovery using maximum power point tracking," Energy Conversion and Management, Vol. 50, No. 6, 1506-1512, 2009.
doi:10.1016/j.enconman.2009.02.015 Google Scholar

3. Al-Majed, S. I. and T. Fujigaki, "Wind power generation: An overview," International Symposium on Modern Electric Power Systems, 1-6, 2010. Google Scholar

4. Mohamed, K. H., N. C. Sahoo, and T. B. Ibrahim, "A survey of technologies used in wave energy conversion systems," International Conference on Energy, Automation, and Signal, 1-6, 2011.
doi:10.1109/ICEAS.2011.6147174 Google Scholar

5. Fu, S. and J. Zhong, "Hydropower in China," IEEE Power and Energy Magazine, Vol. 6, No. 4, 47-51, 2008.
doi:10.1109/MPE.2008.923982 Google Scholar

6. Denny, E., "The economics of tidal energy," Energy Policy, Vol. 37, No. 5, 1914-1924, 2009.
doi:10.1016/j.enpol.2009.01.009 Google Scholar

7. Cabeza, L. F., C. Sole, A. Castell, E. Oro, and A. Gil, "Review of solar thermal storage techniques and associated heat transfer technologies," IEEE Proceedings, Vol. 100, No. 2, 525-538, 2012.
doi:10.1109/JPROC.2011.2157883 Google Scholar

8. Barbier "Geothermal energy technology and current status: An overview," Renewable and Sustainable Energy Reviews, Vol. 6, No. 1-2, 3-65, 2002.
doi:10.1016/S1364-0321(02)00002-3 Google Scholar

9. Loeser, M. and M. A. Redfern, "Overview of biomass conversion and generation technologies," International Universities Power Engineering Conference, 1-4, 2008.
doi:10.1109/UPEC.2008.4651566 Google Scholar

10. Bollen, M. H. and F. Hassan, Integration of Distributed Generation in the Power System, Wiley, IEEE Press, 2011.

11. Zhu, Z. Q., Y. S. Chen, and D. Howe, "On-line optimal field weakening control of permanent magnet brushless AC drives," IEEE Transactions on Industry Applications, Vol. 36, No. 6, 1661-1668, 2000.
doi:10.1109/28.887219 Google Scholar

12. Wang, Y., K. T. Chau, C. C. Chan, and J. Z. Jiang, "Design and analysis of a new multiphase polygonal-winding permanentmagnet brushless DC machine," IEEE Transactions on Magnetics, Vol. 38, No. 5, 3258-3260, 2002.
doi:10.1109/TMAG.2002.802128 Google Scholar

13. Liu, C., K. T. Chau, J. Z. Jiang, and S. Niu, "Comparison of stator-permanent-magnet brushless machines," IEEE Transactions on Magnetics, Vol. 44, No. 11, 4405-4408, 2008.
doi:10.1109/TMAG.2008.2002632 Google Scholar

14. Cheng, M., K. T. Chau, and C. C. Chan, "Design and analysis of a new doubly salient permanent magnet motor," IEEE Transactions on Magnetics, Vol. 37, No. 4, 3012-3020, 2001.
doi:10.1109/20.947054 Google Scholar

15. Chau, K. T., Q. Sun, Y. Fan, and M. Cheng, "Torque ripple minimization of doubly salient permanent magnet motors," IEEE Transactions on Energy Conversion, Vol. 20, No. 2, 352-358, 2005.
doi:10.1109/TEC.2004.841507 Google Scholar

16. Fan, Y., K. T. Chau, and M. Cheng, "A new three-phase doubly salient permanent magnet machine for wind power generation," IEEE Transactions on Industry Applications, Vol. 42, No. 1, 53-60, 2006.
doi:10.1109/TIA.2005.861910 Google Scholar

17. Deodhar, R. P., S. Andersson, I. Boldea, and T. J. E. Miller, "The °ux-reversal machine: A new brushless doubly-salient permanent magnet machine," IEEE Transactions on Industry Applications, Vol. 33, No. 4, 925-934, 1997.
doi:10.1109/28.605734 Google Scholar

18. Zhu, Z. Q., Y. Pang, D. Howe, S. Iwasaki, R. Deodhar, and A. Pride, "Analysis of electromagnetic performance of flux-switching permanent magnet machines by non-linear adaptive lumped parameter magnetic circuit model," IEEE Transactions on Magnetics, Vol. 41, No. 11, 4277-4287, 2005.
doi:10.1109/TMAG.2005.854441 Google Scholar

19. Zhao, W., M. Cheng, K. T. Chau, W. Hua, H. Jia, J. Ji, and W. Li, "Stator-flux-oriented fault-tolerant control of flux-switching permanent-magnet motors," IEEE Transactions on Magnetics, Vol. 47, No. 10, 4191-4194, 2011.
doi:10.1109/TMAG.2011.2157106 Google Scholar

20. Chau, K. T., J. Z. Jiang, and Y. Wang, "A novel stator doubly fed doubly salient permanent magnet brushless machine," IEEE Transactions on Magnetics, Vol. 39, No. 5, 3001-3003, 2003.
doi:10.1109/TMAG.2003.816722 Google Scholar

21. Zhu, X., K. T. Chau, M. Cheng, and C. Yu, "Design and control of a flux-controllable stator-permanent magnet brushless motor drive," Journal of Applied Physics, Vol. 103, No. 7, 07F134-07F134-3, 2008.
doi:10.1063/1.2838325 Google Scholar

22. Liu, C., K. T. Chau, W. Li, and C. Yu, "Efficiency optimization of a permanent-magnet hybrid brushless machine using DC field current control ," IEEE Transactions on Magnetics, Vol. 45, No. 10, 4652-4655, 2009.
doi:10.1109/TMAG.2009.2023063 Google Scholar

23. Chau, K. T., Y. B. Li, J. Z. Jiang, and S. Niu, "Design and control of a PM brushless hybrid generator for wind power application," IEEE Transactions on Magnetics, Vol. 42, No. 10, 3497-3499, 2006.
doi:10.1109/TMAG.2006.879436 Google Scholar

24. Liu, C., K. T. Chau, J. Z. Jiang, and L. Jian, "Design of a new outer-rotor permanent magnet hybrid machine for wind power generation," IEEE Transactions on Magnetics, Vol. 44, No. 6, 1494-1497, 2008.
doi:10.1109/TMAG.2007.916503 Google Scholar

25. Ostovic, V., IEEE Industry Applications Magazine, Vol. 9, No. 1, 52-61, 2003.

26. Yu, C. and K. T. Chau, "Design, analysis and control of DC-excited memory motors," IEEE Transactions on Energy Conversion , Vol. 26, No. 2, 479-489, 2011.
doi:10.1109/TEC.2010.2085048 Google Scholar

27. Yu, C. and K. T. Chau, "Dual-mode operation of DC-excited memory motors under flux regulation," IEEE Transactions on Industry Applications, Vol. 47, No. 5, 2031-2041, 2011.
doi:10.1109/TIA.2011.2161850 Google Scholar

28. Li, W., K. T. Chau, Y. Gong, J. Z. Jiang, and F. Li, "A new flux-mnemonic dual-magnet brushless machine," IEEE Transactions on Magnetics, Vol. 47, No. 10, 4223-4226, 2011.
doi:10.1109/TMAG.2011.2157954 Google Scholar

29. Yu, C., K. T. Chau, and J. Z. Jiang, "A flux-mnemonic permanent magnet brushless machine for wind power generation," Journal of Applied Physics, Vol. 105, No. 7, 07F114-07F114-3, 2009.
doi:10.1063/1.3072377 Google Scholar

30. Atallah, K. and D. Howe, "A novel high performance magnetic gear," IEEE Transactions on Magnetics, Vol. 37, No. 4, 2844-2846, 2001.
doi:10.1109/20.951324 Google Scholar

31. Jian, L., K. T. Chau, Y. Gong, J. Z. Jiang, C. Yu, and W. Li, "Comparison of coaxial magnetic gears with different topologies," IEEE Transactions on Magnetics, Vol. 45, No. 10, 4526-4529, 2009.
doi:10.1109/TMAG.2009.2021662 Google Scholar

32. Jian, L. and K.-T. Chau, "Analytical calculation of magnetic field distribution in coaxial magnetic gears," Progress In Electromagnetics Research, Vol. 92, 1-16, 2009.
doi:10.2528/PIER09032301 Google Scholar

33. Liu, X., K. T. Chau, J. Z. Jiang, and C. Yu, "Design and analysis of interior-magnet outer-rotor concentric magnetic gears," Journal of Applied Physics, Vol. 105, No. 7, 07F101-07F101-3, 2009.
doi:10.1063/1.3058619 Google Scholar

34. Jian, L. and K. T. Chau, "A coaxial magnetic gear with Halbach permanent magnet arrays," IEEE Transactions on Energy Conversion, Vol. 25, No. 2, 319-328, 2010.
doi:10.1109/TEC.2010.2046997 Google Scholar

35. Gouda, E., S. Mezani, L. Baghli, and A. Rezzoug, "Comparative study between mechanical and magnetic planetary gears," IEEE Transactions on Magnetics, Vol. 47, No. 2, 439-450, 2011.
doi:10.1109/TMAG.2010.2090890 Google Scholar

36. Jian, L., K. T. Chau, and J. Z. Jiang, "A magnetic-geared outer-rotor permanent-magnet brushless machine for wind power generation," IEEE Transactions on Industry Applications, Vol. 45, No. 3, 954-962, 2009.
doi:10.1109/TIA.2009.2018974 Google Scholar

37. Harris, M. R., "Comparison of alternative topologies for VRPM (transverse-flux) electrical machines," IEE Colloquium on New Topologies for Permanent Magnet Machines, 2/1-2/7, 1997. Google Scholar

38. Toba, A. and T. A. Lipo, "Novel dual-excitation permanent magnet vernier machine," IEEE Conference on Industry Applications, 2539-2544, 1999. Google Scholar

39. Li, J., K. T. Chau, and W. Li, "Harmonic analysis and comparison of permanent magnet vernier and magnetic-geared machines," IEEE Transactions on Magnetics, Vol. 47, No. 10, 3649-3652, 2011.
doi:10.1109/TMAG.2011.2159105 Google Scholar

40. Li, J., K. T. Chau, J. Z. Jiang, C. Liu, and W. Li, "A new efficient permanent-magnet vernier machine for wind power generation," IEEE Transactions on Magnetics, Vol. 45, No. 6, 1475-1478, 2010.
doi:10.1109/TMAG.2010.2044636 Google Scholar

41. Spooner, E. and L. Haydock, "Vernier hybrid machines," IEE Proceedings - Electric Power Applications, Vol. 150, No. 6, 655-662, 2003.
doi:10.1049/ip-epa:20030909 Google Scholar

42. Holehouse, R. C., K. Atallah, and J. Wang, "Design and realization of a linear magnetic gear," IEEE Transactions on Magnetics, Vol. 47, No. 10, 4171-4174, 2011.
doi:10.1109/TMAG.2011.2157101 Google Scholar

43. Li, W. and K.-T. Chau, "Analytical field calculation for linear tubular magnetic gears using equivalent anisotropic magnetic permeability," Progress In Electromagnetics Research, Vol. 127, 155-171, 2012.
doi:10.2528/PIER12030301 Google Scholar

44. Li, W., K. T. Chau, and J. Z. Jiang, "Application of linear magnetic gears for pseudo-direct-drive oceanic wave energy harvesting," IEEE Transactions on Magnetics, Vol. 47, No. 10, 2624-2627, 2011.
doi:10.1109/TMAG.2011.2146233 Google Scholar

45. Brooking, P. R. M. and M. A. Mueller, "Power conditioning of the output from a linear vernier hybrid permanent magnet generator for use in direct drive wave energy converters," IEE Proceedings - Generation, Transmission and Distribution, Vol. 152, No. 5, 673-681, 2005.
doi:10.1049/ip-gtd:20045134 Google Scholar

46. Du, Y., K. T. Chau, M. Cheng, Y. Fan, Y. Wang, W. Hua, and Z. Wang, "Design and analysis of linear stator permanent magnet vernier machines," IEEE Transactions on Magnetics, Vol. 47, No. 10, 4219-4222, 2011.
doi:10.1109/TMAG.2011.2156392 Google Scholar

47. Supermagnete "Why the price explosion for neodymium magnets?,", Available from: http://www.supermagnete.de/eng/faq/price, [Accessed May 1, 2012]. Google Scholar

48. Cardenas, R., R. Pena, M. Perez, J. Clare, G. Asher, and P. Wheeler, "Control of a switched reluctance generator for variable-speed wind energy applications," IEEE Transactions on Energy Conversion, Vol. 20, No. 4, 781-791, 2005.
doi:10.1109/TEC.2005.853733 Google Scholar

49. Chau, K. T., M. Cheng, and C. C. Chan, "Nonlinear magnetic circuit analysis for a novel stator doubly fed doubly salient machine," IEEE Transactions on Magnetics, Vol. 38, No. 5, 2382-2384, 2002.
doi:10.1109/TMAG.2002.803582 Google Scholar

50. Fan, Y., K. T. Chau, and S. Niu, "Development of a new brushless doubly fed doubly salient machine for wind power generation," IEEE Transactions on Magnetics, Vol. 42, No. 10, 3455-3457, 2006.
doi:10.1109/TMAG.2006.879435 Google Scholar

Prof. Kwok-Tong Chau

Mr. Wenlong Li

Dr. Christopher H. T. Lee