volume | PIER Journals

Abstract

This paper describes an experimental model for the characterization of electromagnetic phenomena that occur in the end regions of large turbo-generators. The study is based on a test bench that contains a stack of steel laminations from a 900 MW turbogenerator stator and two exciting circuits in order to combine a transverse magnetic flux with the in-plane flux. In order to explain the flux penetration within the magnetic sheet stack, accurate experimental measurements are performed. Results are compared with the finite element simulations using code_Carmel3D. In the same time, theoretical and experimental results are analyzed with a view to examining the influence of transverse flux on additional losses.

1. Tavner, P. J. and A. F. Anderson, "Core faults in large generators," IEE Proceedings --- Electric Power Applications, Vol. 152, No. 6, 1427-1439, 2005.
doi:10.1049/ip-epa:20050102 Google Scholar

2. Drzymala, P., K. Komeza, H. Welfle, S. Wiak, D. Kardas, and S. Sieradzki, "Field analysis of end regions of stator windings of large turbogenerators," ISEF 2009 --- XIV International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering, 2009. Google Scholar

3. Lin, R., A. Haavisto, and A. Arkkio, "Analysis of Eddy-current loss in end shield and frame of a large induction machine," IEEE Transactions on Magnetics, Vol. 46, No. 3, 942-948, 2010.
doi:10.1109/TMAG.2009.2031173 Google Scholar

4. Yamazaki, K., S. Tada, H. Mogi, Y. Mishima, C. Kaido, S. Kanao, K. Takahashi, K. Ide, K. Hattori, and A. Nakahara, "Eddy current analysis considering lamination for stator core ends of turbin generators," IEEE Transactions on Magnetics, Vol. 44, No. 6, 1502-1505, 2008.
doi:10.1109/TMAG.2007.916246 Google Scholar

5. Fujita, M., T. Tokumasu, H. Yoda, H. Tsuda, K. Ito, and S. Nagano, "Magnetic field analysis of stator core end region of large turbogenerators," IEEE Transactions on Magnetics, Vol. 36, No. 4, 1850-1853, Jul. 2000.
doi:10.1109/20.877805 Google Scholar

6. Mecrow, B., A. Jack, and C. Cross, "Electromagnetic design of turbogenerator stator end regions," IEE Proceedings C --- Generation, Transmission and Distribution, Vol. 136, No. 6, 361-372, Nov. 1989.
doi:10.1049/ip-c.1989.0050 Google Scholar

7. Jackson, R., "Interlamination voltages in large turbogenerators," Proceedings of the Institution of Electrical Engineers, Vol. 125, No. 11, 1232-1238, 1978.
doi:10.1049/piee.1978.0261 Google Scholar

8. Lee, S. B., G. Kliman, M. Shah, W. Mall, N. Nair, and R. Lusted, "An advanced technique for detecting inter-laminar stator core faults in large electric machines," IEEE Transactions on Industry Applications, Vol. 41, No. 5, 1185-1193, Sep. 2005.
doi:10.1109/TIA.2005.853383 Google Scholar

9. Singleton, R., P. Marshall, and J. Steel, "Axial magnetic flux in synchronous machines: The effect of operating conditions," IEEE Transactions on Power Apparatus and Systems, Vol. 100, No. 3, 1226-1233, 1981.
doi:10.1109/TPAS.1981.316594 Google Scholar

10. Hilliar, R., R. Jackson, D. Ward, and R. Bennett, "Measurements of the currents flowing in the stator frame of a 500MW turbogenerator," IEE Proceedings C --- Generation, Transmission and Distribution,, Vol. 133, No. 1, 16-25, 1986.
doi:10.1049/ip-c.1986.0003 Google Scholar

11. Platt, R., L. Kerr, and A. Anderson, "Measuring flux and interlaminar voltage in turbine generator end regions," IEE EMDA Conf., Vol. 213, 201-205, London 1982. Google Scholar

12. Karapetoff, V., "The Magnetic Circuit --- Electromagnetic Engineering," Watchmaker Publishing, 2003. Google Scholar

13. Geuzaine, C. and J.-F. Remacle, "GMSH: A 3-D finite element mesh generator with built-in pre- and post-processing facilities," International Journal for Numerical Methods in Engineering, Vol. 79, No. 11, 1309-1331, 2009.
doi:http://doi.wiley.com/10.1002/nme.2579 Google Scholar

Dr. Gilles Vogt

Dr. Cristian Demian

Prof. Raphael Romary

Dr. Guillaume Parent

Dr. Valentin Costan