volume | PIER Journals

Abstract

The flywheel-type dual-stator permanent magnet starter generator combines engine flywheel and starter generator rotor into a single unit, which has the advantages of high efficiency, high power density, and compact structure. This paper proposes a new type of dual-stator permanent magnet starter generator topology in which the two stators are concentric and share the same permanent magnet rotor. Equivalent magnetic circuit modeling of the inner stator's magnetic field, outer stator's magnetic field, and synthetic magnetic field using the equivalent magnetic circuit method list the system of flux equations and solve the main magnetic flux, leakage flux, and leakage coefficient, and the results show that the equivalent magnetic circuit method has smaller error and higher accuracy than the finite element method. The harmonic electric potential of the starter generator is modeled and analyzed. The permanent magnet rotor and inner and outer stator structures are optimized to obtain the optimal parameters, and the prototype is manufactured and tested. The optimized starter generator no-load induced electromotive force fundamental amplitude is improved. The induced electromotive force harmonic distortion rate is reduced, and the output performance of the whole generator is significantly improved.

1. Wang, X., X. He, and P. Gao, "Research on electromagnetic vibration noise attenuation method of permanent magnet motor with V-magnet rotor for electric vehicles," Chinese Journal of Electrical Engineering, Vol. 39, No. 16, 4919-4926+4994, 2019.

2. Baek, Soo-Whang and Sang Wook Lee, "Design optimization and experimental verification of permanent magnet synchronous motor used in electric compressors in electric vehicles," Applied Sciences, Vol. 10, No. 9, 3235, 2020.

3. Sun, Xiaodong, Zhou Shi, Gang Lei, Youguang Guo, and Jianguo Zhu, "Analysis and design optimization of a permanent magnet synchronous motor for a campus patrol electric vehicle," IEEE Transactions on Vehicular Technology, Vol. 68, No. 11, 10535-10544, 2019.

4. Yang, Yang, Qiang He, Chunyun Fu, Shuiping Liao, and Peng Tan, "Efficiency improvement of permanent magnet synchronous motor for electric vehicles," Energy, Vol. 213, 118859, 2020.

5. Agamloh, Emmanuel, Annette Von Jouanne, and Alexandre Yokochi, "An overview of electric machine trends in modern electric vehicles," Machines, Vol. 8, No. 2, 20, 2020.

6. Huang, H. and W. Zhang, "Research on the design of hybrid energy storage system for electric vehicles based on built-in permanent magnet motor drive," China Journal of Construction Machinery, Vol. 18, No. 1, 68-73, 2020.

7. Tikadar, Amitav, Nitish Kumar, Yogendra Joshi, and Satish Kumar, "Coupled electro-thermal analysis of permanent magnet synchronous motor for electric vehicles," 2020 19th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), 249-256, Orlando, FL, USA, 2020.

8. Li, Q., C. Sun, T. Fan, X. Wen, and Y. Li, "Optimized design of rotor poles for automotive double-layer embedded permanent magnet motors," Journal of Electrical Machines and Control, Vol. 24, No. 9, 56-64, 2020.

9. Parsapour, Amir, Mehdi Moallem, Ion Boldea, and Babak Fahimi, "High torque density double stator permanent magnet electric machine," 2019 IEEE International Electric Machines & Drives Conference (IEMDC), 664-670, San Diego, CA, USA, 2019.

10. Wu, Jiacheng, Yan Hu, Bingyi Zhang, Guihong Feng, and Zeyu Liu, "Comparison and analysis of different rotor structures of double-stator permanent magnet synchronous motor," IET Electric Power Applications, Vol. 16, No. 6, 685-700, 2022.

11. Chai, Feng, Jing Xia, Bin Guo, and Shukang Cheng, "Double-stator permanent magnet synchronous in-wheel motor for hybrid electric drive system," 2008 14th Symposium on Electromagnetic Launch Technology, 1-5, Victoria, BC, Canada, 2008.

12. Wang, Daohan, Dengxu Zhang, Donghui Xue, Chen Peng, and Xiuhe Wang, "A new hybrid excitation permanent magnet machine with an independent AC excitation port," IEEE Transactions on Industrial Electronics, Vol. 66, No. 8, 5872-5882, 2018.

13. Zhao, X. and T. Dong, "Design and electric/generation state analysis of double-stator permanent magnet starter generator," Electrotechnology, No. 21, 223-226+230, 2022.

14. Zhao, Yong, Wenxin Huang, Wen Jiang, Xiaogang Lin, and Xu Wu, "Optimal design and performance analysis of dual-stator permanent magnet fault-tolerant machine," IEEE Transactions on Magnetics, Vol. 57, No. 2, 1-6, 2021.

15. Gu, S., "Research on magnetic coupling analysis and optimal design of heteropolar double-stator permanent magnet synchronous motor," Qingdao University, Qingdao, China, 2022.

16. Bilal, Muhammad, Junaid Ikram, Adnan Fida, Syed Sabir Hussain Bukhari, Nadeem Haider, and Jong-Suk Ro, "Performance improvement of dual stator axial flux spoke type permanent magnet vernier machine," IEEE Access, Vol. 9, 64179-64188, 2021.

17. Kim, Dongjae, Hongsik Hwang, Sungwoo Bae, and Cheewoo Lee, "Analysis and design of a double-stator flux-switching permanent magnet machine using ferrite magnet in hybrid electric vehicles," IEEE Transactions on Magnetics, Vol. 52, No. 7, 1-4, 2016.

18. Ahmad, Mohd Saufi, Dahaman Ishak, Tiang Tow Leong, and Mohd Rezal Mohamed, "Analytical subdomain model for double-stator permanent magnet synchronous machine with surface-mounted radial magnetization," Engineering Proceedings, Vol. 12, No. 1, 37, 2021.

19. Tarek, Md Tawhid Bin, Shuvajit Das, and Yilmaz Sozer, "Comparative analysis of static eccentricity faults of double stator single rotor axial flux permanent magnet motors," 2019 IEEE Energy Conversion Congress and Exposition (ECCE), 3223-3228, Baltimore, MD, USA, 2019.

20. Wang, Z., D. Wang, C. Wang, et al., "Basic mechanism and operating characteristics of a new AC magnetically regulated permanent magnet synchronous motor," Chinese Journal of Electrical Engineering, Vol. 43, No. 7, 2573-2585, 2023.

21. Xia, Y., W. Gong, S. Huang, et al., "Effect of fundamental armature magnetokinetic potential on rotor tooth harmonic electric potential," Chinese Journal of Electrical Engineering, Vol. 35, No. 9, 2304-2309, 2015.

22. Xia, Yonghong, Shihua Zhong, Lin Zhou, Zijian Wen, Ying Chen, and Jingming Zhang, "Influence of design parameters on the field current of the tooth harmonic excitation system," IET Electric Power Applications, Vol. 14, No. 9, 1702-1711, 2020.

23. Cui, X., "Electromagnetic design and analysis of built-in tangential permanent magnet synchronous generator," Harbin Institute of Technology, Harbin, China, 2015.

24. Qu, Chunyu, Ziqi Guo, Yongzhuang Hu, Xiuping Wang, and Fangxu Han, "Multi-objective optimization design of a new permanent magnet synchronous motor based on the Taguchi method," Energies, Vol. 15, No. 19, 7347, 2022.

25. Si, Jikai, Suzhen Zhao, Haichao Feng, Ruiwu Cao, and Yihua Hu, "Multi-objective optimization of surface-mounted and interior permanent magnet synchronous motor based on Taguchi method and response surface method," Chinese Journal of Electrical Engineering, Vol. 4, No. 1, 67-73, 2018.

26. Xu, Jiawei, Lingyu Gao, Lubin Zeng, and Ruilin Pei, "Optimum design of interior permanent magnet synchronous motor using Taguchi method," 2019 IEEE Transportation Electrification Conference and Expo (ITEC), 1-4, Detroit, MI, USA, 2019.

Dr. Mingling Gao

Dr. Zhenhai Yu

Dr. Wenjie Jiao

Dr. Wenjing Hu

Dr. Huihui Geng

Dr. Yixin Liu

Dr. Shiqiang Liu

Dr. Yishuo Liu