Vol. 112
Latest Volume
All Volumes
PIERL 112 [2023] PIERL 111 [2023] PIERL 110 [2023] PIERL 109 [2023] PIERL 108 [2023] PIERL 107 [2022] PIERL 106 [2022] PIERL 105 [2022] PIERL 104 [2022] PIERL 103 [2022] PIERL 102 [2022] PIERL 101 [2021] PIERL 100 [2021] PIERL 99 [2021] PIERL 98 [2021] PIERL 97 [2021] PIERL 96 [2021] PIERL 95 [2021] PIERL 94 [2020] PIERL 93 [2020] PIERL 92 [2020] PIERL 91 [2020] PIERL 90 [2020] PIERL 89 [2020] PIERL 88 [2020] PIERL 87 [2019] PIERL 86 [2019] PIERL 85 [2019] PIERL 84 [2019] PIERL 83 [2019] PIERL 82 [2019] PIERL 81 [2019] PIERL 80 [2018] PIERL 79 [2018] PIERL 78 [2018] PIERL 77 [2018] PIERL 76 [2018] PIERL 75 [2018] PIERL 74 [2018] PIERL 73 [2018] PIERL 72 [2018] PIERL 71 [2017] PIERL 70 [2017] PIERL 69 [2017] PIERL 68 [2017] PIERL 67 [2017] PIERL 66 [2017] PIERL 65 [2017] PIERL 64 [2016] PIERL 63 [2016] PIERL 62 [2016] PIERL 61 [2016] PIERL 60 [2016] PIERL 59 [2016] PIERL 58 [2016] PIERL 57 [2015] PIERL 56 [2015] PIERL 55 [2015] PIERL 54 [2015] PIERL 53 [2015] PIERL 52 [2015] PIERL 51 [2015] PIERL 50 [2014] PIERL 49 [2014] PIERL 48 [2014] PIERL 47 [2014] PIERL 46 [2014] PIERL 45 [2014] PIERL 44 [2014] PIERL 43 [2013] PIERL 42 [2013] PIERL 41 [2013] PIERL 40 [2013] PIERL 39 [2013] PIERL 38 [2013] PIERL 37 [2013] PIERL 36 [2013] PIERL 35 [2012] PIERL 34 [2012] PIERL 33 [2012] PIERL 32 [2012] PIERL 31 [2012] PIERL 30 [2012] PIERL 29 [2012] PIERL 28 [2012] PIERL 27 [2011] PIERL 26 [2011] PIERL 25 [2011] PIERL 24 [2011] PIERL 23 [2011] PIERL 22 [2011] PIERL 21 [2011] PIERL 20 [2011] PIERL 19 [2010] PIERL 18 [2010] PIERL 17 [2010] PIERL 16 [2010] PIERL 15 [2010] PIERL 14 [2010] PIERL 13 [2010] PIERL 12 [2009] PIERL 11 [2009] PIERL 10 [2009] PIERL 9 [2009] PIERL 8 [2009] PIERL 7 [2009] PIERL 6 [2009] PIERL 5 [2008] PIERL 4 [2008] PIERL 3 [2008] PIERL 2 [2008] PIERL 1 [2008]
2023-09-16
PIER Letters
Vol. 112, 77-85, 2023
download: 37
Mutual Coupling Reduction in UWB MIMO Antenna Using T-Shaped Stub
Kondapalli Venu Gopal and Yarravarapu Srinivasa Rao
A 26 × 25 mm2 arbitrary-shaped antenna is constructed in this article, and it was expanded to 2 x 2 Multiple Input Multiple Output (MIMO) antenna. It has a range of 3.1 to 8.2 GHz. A T-shaped stub is employed in this instance to reduce the mutual coupling between the two ports. The effectiveness of the MIMO aerial is demonstrated using envelope correlation coefficient and radiation pattern. Additionally, it has been shown that simulated and measured results generally agree.
Mutual Coupling Reduction in UWB MIMO Antenna Using T-shaped Stub
2023-09-03
PIER Letters
Vol. 112, 67-75, 2023
download: 137
Design of a Miniaturized Microstrip Diplexer Based on Hairpin and Short Stub for 5G and Wi-Fi Communications
Soufiane Achraou , Alia Zakriti , Souhaila Ben Haddi and Mohssine El Ouahabi
This paper focuses on designing and manufacturing a compact microstrip diplexer, which operates at 3.5 GHz and 5 GHz for 5G and Wi-Fi applications, respectively. Indeed, two bandpass filters are combined to create the proposed diplexer. For making bandpass filters compact, a hairpin resonator is suggested and developed into an E-shaped resonator. To attain the central frequencies, a short microstrip stub loading the E-shaped resonator is proposed. The filters were combined by a coupling junction to form the final diplexer. The proposed diplexer exhibits good isolation that is better than 40 dB in the whole operational frequency band. Additionally, the passband insertion losses are about 1 dB, and the return losses are about 20 dB and 26 dB at the two channels, respectively. Moreover, the final size of the manufactured diplexer is 30 × 25 mm2 (0.6λg x 0.52λg). These results confirm that the suggested diplexer is suitable for the demanded applications.
Design of a Miniaturized Microstrip Diplexer Based on Hairpin and Short Stub for 5G and Wi-Fi Communications
2023-08-28
PIER Letters
Vol. 112, 59-65, 2023
download: 110
On the Propagation through Annular Core Optical Fiber Under dB Boundary Conditions
Muhammad Saqlain , Lway Faisal Abdulrazak , Muhammad Kashif , Talib A. Al-Sharify , Laith S. Ismail and Muhammad Abuzar Baqir
In this paper, we investigate the propagation behavior of electromagnetic waves through coaxial optical fiber bounded with DB-boundaries. For this purpose, an eigenvalue equation is derived by using suitable DB-boundary conditions to determine the allowed values of propagation constant β for each propagating mode. Moreover, we have analyzed the electric field and power distribution patterns through coaxial optical fiber for different propagating modes and dimensions, respectively. Our results show that small dimensional guide confinement remains maximum close to the lower interface of the guide, whereas, for larger dimensions, it shifts toward the upper interface. Investigations show that high power is confined by H12 mode compared to H11 mode, and, therefore, shows contrary behavior compared to commonly used fibers.
On the Propagation through Annular Core Optical Fiber under DB Boundary Conditions
2023-08-25
PIER Letters
Vol. 112, 49-58, 2023
download: 109
Dual-UWB Dielectric Resonator Antenna for OAM Communication
Zhe Wang , Haitao Nie , Shunshun Yue , Tailin Zhao and Li Shi
We designed a dielectric resonator antenna (DRA) that carries orbital angular momentum and has dual-band ultra-wideband characteristics based on the advantage of minor rain decay in L-band and C-band of microwave bands. The cavity of the antenna adopts an inner and outer nested spiral structure, and the material of resonant cavity shell is photosensitive resin. The internal medium is distilled water with a dielectric constant of 81, and the outer filling is saline with a concentration of 0.035 g/ml at room temperature for the dielectric constant. At the bottom of the cavity, we applied 2 feeds with phase difference of 90° to produce a circularly polarized beam in the DRA. Adjusting the size of the DRA and the height of the helical step surface to excite the OAM waves in higher order modes. The designed DRA generates resonance in 0.82-1.63 GHz and 3.35-7.27 GHz, and achieves ultra-wideband in both operating bands, furthermore, the antenna can generate OAM waves in l=±1 and l=±3 modes when operating at 1.51 GHz and 5.28 GHz, respectively. The simulation results match the measured results. The results show that the vortex wave generated by our designed antenna also has advantages such as high mode purity. Therefore, it can be effective in near-field communication and also provides a new solution for OAM near-field communication in 6G which is of great importance, and also for satellite communication and downlink signal transmission of communication satellites.
Dual-UWB Dielectric Resonator Antenna for OAM Communication
2023-08-25
PIER Letters
Vol. 112, 41-47, 2023
download: 82
Design of a Wideband Wide Scanning Phased Antenna Array with FSS Superstrates
Daqun Yu , Zhang-Cheng Hao , Lei Sun , Kai Yan , Wenbo Zhang and Yuan Jiang
In this paper, a planar wideband antenna array with wide scanning angle in both E- and H-planes is proposed. The dipole antenna is used as an essential element of the array. To enlarge the scanning angle of the array, two layers of frequency selective surface (FSS) superstrates are loaded on the top of the antenna elements. A conducting-patch with shorting pins is loaded under the unit patch to enlarge the bandwidth of the array. Both simulated and measured results have confirmed that the proposed antenna array can scan up to 85° and 70° in the E- and H-planes from 8 GHz to 11 GHz, respectively.
Design of a Wideband Wide Scanning Phased Antenna Array with FSS Superstrates
2023-08-20
PIER Letters
Vol. 112, 35-40, 2023
download: 84
Design of Compact SIW Bandpass Filter with High Selectivity
Yudan Wu , Yingjie Yu , Ping Su , Xiang Zhang , Licong Wang and Shuaishuai Wang
In this paper, a method of designing a SIW (Substrate Integrated Waveguide) bandpass filter with high selectivity is proposed. Four resonant cavities of the proposed filter are arranged in straight line. The microstrip gradient line is directly fed into the cavities. Two U-shaped slots are etched on the top face of each cavity which will result in the resonant modes reduced and the high modes of SIW cavity pushed far away from the dominant resonant mode. Thus the filter will have both the features of compact size and wide stopband. The center frequency of the filter is designed at 5.2 GHz. The measured results are highly matched with the simulated ones.
Design of Compact SIW Bandpass Filter with High Selectivity
2023-08-19
PIER Letters
Vol. 112, 27-34, 2023
download: 82
A Novel Miniaturized Image Rejection Bandpass Filter Basing on Stepped-Impedance Resonators
Guangxiu Zhao , Chen Li , Minquan Li , Pingjuan Zhang , Yajing Yan , Xiaming Mo and Ziyun Tu
In order to meet the requirements for the suppression of mirror frequencies in the 5G RF front end, this paper proposes a novel miniaturized image rejection bandpass filter by loading Stepped-Impedance Resonators (SIR). By analyzing the relationship between the impedance ratio of a half-wavelength SIR and its electrical length, we have designed an improved second-order bandpass filter, which reduces the size by 34.3% compared to traditional five-order hairpin filters. In order to further enhance the performance of the filter, the use of a radial stub, as opposed to the traditional rectangular open stub, allows for the generation of a wider band transmission zero, which can be analyzed using lumped equivalent circuits. This integration improves the stopband rejection of the filter. The results show that the passband range is 5.35 GHz-6.64 GHz; the rejection in the stopband range 8.10 GHz-11.98 GHz is over 45 dB; and the size is only 0.385λg×0.295λg.
A Novel Miniaturized Image Rejection Bandpass Filter Basing on Stepped-impedance Resonators
2023-08-15
PIER Letters
Vol. 112, 17-25, 2023
download: 34
A Wideband Harmonic Suppression Filtering Antenna with Multiple Radiation Nulls
Xinwei Chen , Qihao Zhuge , Guorui Han , Runbo Ma , Jinrong Su and Wenmei Zhang
In this paper, a wide harmonic suppression filtering antenna with high selectivity is designed. The filtering antenna adopts dual-layer structures. By introducing four parasitic patches around the top driven patch, the impedance bandwidth is widened. Moreover, the current directions on the driven patch and the parasitic patches are opposite in some frequency, so that the radiation null is introduced. In addition, a rectangular split ring DGS is etched in the middle of the ground plane, the lower sideband radiation null is introduced. Two sets of dumbbell-shaped defected ground structures are etched on the ground plane of the intermediate layer. The high-order harmonics are suppressed, and another radiation null is introduced. The experimental results show that the antenna operates at 2.46-2.66 GHz; the relative bandwidth is 7.8%; the peak gain is 3.8 dBi; and the S11 is more than -3 dB at 3-13 GHz.
A Wideband Harmonic Suppression Filtering Antenna with Multiple Radiation Nulls
2023-08-10
PIER Letters
Vol. 112, 9-15, 2023
download: 66
Polarization Switching in Fan-Beam Reflector-Backed Array Antenna
Osama Aziz , MuhibUr Rahman and Mahdi Naghshvarianjahromi
A systematic technique for switching between horizontal and vertical polarizations is introduced. A fan-beam antenna array for base station applications employing a grounded reflector is implemented, and the proposed approach is implemented and validated on it. The antenna array is realized using planar monopole elementary elements against a non-parasitic reflector, which yields a desirable fan-beam pattern. The corresponding 3 dB H-plane beamwidth can be easily adjusted by changing the reflector height. Two versions of the antenna arrays are used to demonstrate suppression of unwanted asymmetrical modes in the current distribution yielding improved cross-polar isolation. The measured H-plane 3-dB beamwidth is approximately 127 degrees at 900 MHz and 124 degrees at 955 MHz. The corresponding side lobe level is almost -11.7 dB and -8.7 dB at 900 MHz, while the back lobe level of -9.3 dB and -11 dB at 955 MHz from measurements. The gain is within the acceptable level in both cases and compared with simulations that possess good agreement. By taking into account the antenna design and manufacturing aspects, such antennas will pave the way to be employed in OFDM reconfigurable antenna applications and Identification Friend or Foe (IFF).
Polarization Switching in Fan-beam Reflector-backed Array Antenna
2023-08-04
PIER Letters
Vol. 112, 1-8, 2023
download: 74
Quad Element Reconfigurable Radiation Pattern MIMO Antenna for Indoor Wireless Communication
Thangarasu Deepa and Thipparaju Rama Rao
A quad-element reconfigurable radiation pattern Multiple Input Multiple Output (MIMO) antenna is designed for WLAN and 5G applications suitable for indoor wireless communications. Antenna system consists of four radiating elements that operate over triband frequencies 2.4, 3.5 and 5.5 GHz. Moreover, the pattern diversity is obtained by introducing two diagonally crossed slots in the radiator to steer the main beams of the antenna in eight different angular directions using eight PIN diodes. The overall physical dimension of the proposed antenna is about 0.55λ0 × 0.55λ0. In addition, an Acrylonitrile Butadiene Styrene (ABS) enclosure is designed, and the performance of the proposed antenna is evaluated. The measurement results show that the proposed antenna has an impedance bandwidth of 4.18%, 14.13%, and 28.5% at the said frequencies, respectively.
Quad Element Reconfigurable Radiation Pattern MIMO Antenna for Indoor Wireless Communication