volume | PIER Journals

Abstract

A dual-band printed dipole antenna with integrated balun feed is given in this paper. First, the fork-shaped slot is etched on the arms of the printed dipole antenna to achieve the dual-band operation with resonances at WLAN bands. The radiating element without balun is optimized and operates at 2.4 GHz (2180-2750 MHz) and 5.2 GHz (5040 MHz-5480 MHz) where return loss is less than -10 dB. In order to further get a lager bandwidth, a modified Marchand balun is introduced for dual-band operation, which can provide two resonances in each band to enhance impedance bandwidth. By co-designing the radiating element with the dual-band balun, an antenna covering 2150-2750 MHz and 5050-6230 MHz has been achieved. The design equations for modified balun have been presented and agreement between calculations and measurements is good.

1. Prommak, C., J. Kabara, D. Tipper, and C. Charnsripinyo, "Next-genner-ation wireless LAN system design," Proc. MILCOM, Vol. 1, 473-477, 2002.
doi:10.1109/MILCOM.2002.1180488 Google Scholar

2. Chen, H. M., J. M. Chen, P. S. Cheng, and Y. F. Lin, "Feed for dual-band printed dipole antenna," Electron. Lett., Vol. 40, 1320-1322, 2004.
doi:10.1049/el:20046360 Google Scholar

3. Suh, S. Y., A. E. Waltho, L. Krishnamurthy, D. Souza, S. Gupta, H. K. Pan, and V. K. Nair, "A miniaturized dual-band dipole antenna with a modified meander line for laptop computer application in 2.5 and 5.5 GHz WLAN band," IEEE Antennas and Propagation Society Int. Symt., 2617-2620, 2006. Google Scholar

4. Zhang, Z., M. F. Iskander, J. C. Langer, and J. Mathews, "Dual-band WLAN dipole antenna using an internal matching circuit," IEEE Trans. Antennas Propagat., Vol. 53, 1813-1813, 2005.
doi:10.1109/TAP.2005.846784 Google Scholar

5. Su, S. W. and J. H. Chou, "Low cost flat metal-plate dipole antenna for 2.4/5-GHz WLAN operation," Microw. Opt. Tech. Lett., Vol. 50, 1686-1687, 2008.
doi:10.1002/mop.23461 Google Scholar

6. Liu, W. C., "Optimal design of dualband CPW-fed G-shaped monopole antenna for WLAN application," Progress In Electromagnetics Research, Vol. 74, 21-38, 2007.
doi:10.2528/PIER07041401 Google Scholar

7. Wu, Y. J., B. H. Sun, J. F. Li, and Q. Z. Liu, "Triple-band omni-directional antenna for WLAN application," Progress In Electromagnetics Research, Vol. 76, 477-484, 2007.
doi:10.2528/PIER07080601 Google Scholar

8. Wang, F. J. and J. S. Zhang, "Wide band cavity-baked patch antenna for PCS/IMI2000/2.4 GHz WLAN," Progress In Electromagnetics Research, Vol. 74, 39-46, 2007.
doi:10.2528/PIER07041801 Google Scholar

9. Ren, W., "Compact dual-band slot antenna for 2.4/5 GHz WLAN applications," Progress In Electrimagnetics Research B, Vol. 8, 319-327, 2008.
doi:10.2528/PIERB08071406 Google Scholar

10. Gao, J. P., X. X. Yang, J. S. Zhang, and J. X. Xiao, "A printed volcano smoke antenna for UWB and WLAN communications," Progress In Electromagnetics Research Letters, Vol. 4, 55-61, 2008.
doi:10.2528/PIERL08051102 Google Scholar

11. Jolani, F., A. M. Dadgarpour, and H. R. Hassani, "Compact M-slot folded patch antenna for WLAN," Progress In Electromagnetics Research Letters, Vol. 3, 35-42, 2008.
doi:10.2528/PIERL08012801 Google Scholar

12. Trifunovic, V. and B. Jokanovic, "Review of printed Marchand and double Y baluns: Characteristics and application," IEEE Trans. Micro. Theory Tech., Vol. 42, 1454-1462, 1994.
doi:10.1109/22.297806 Google Scholar

13. Edwards, B. and D. Rees, "A broadband printed dipole with integrated balun," Micro. J., 339-344, 1987. Google Scholar

14. Scott, M., "A printed dipole for wide-scanning array application," 11th Int. Conf. on Antennas and Propagat., Vol. 1, 37-40, 2001.
doi:10.1049/cp:20010233 Google Scholar

15. Teo, P. H., K. S. Lee, Y. B. Gan, and C. K. Lee, "Development of bow-tie antenna with an orthogonal feed," Microw. Opt. Tech. Lett., Vol. 35, 255-257, 2002.
doi:10.1002/mop.10575 Google Scholar

Dr. Xi Li

Dr. Lin Yang

Prof. Shu-Xi Gong

Dr. Yan-Jiong Yang