volume | PIER Journals

Abstract

When a magnetic source is moved and/or oscillating above a conductive linear plate a traveling time varying magnetic field is created in the airgap. This field induces eddy currents in the plate that can simultaneously create normal and tangential forces. The transient fields and the forces created by the magnetic source are modeled using a novel 2-D analytic based A-Φ method in which the presence of the source field is incorporated into the boundary conditions of the plate. The analytic based solution is obtained by using the spatial Fourier transform and temporal Laplace transform. The performance of the method is compared with a 2-D transient finite element model with a Halbach rotor source field. The derived transient force equations are written in a general form so that they can be applied to any magnetic source.

1. Mendrela, E. A. and E. Gierczak, "Two-dimensional analysis of linear induction motor using Fourier's series method," Arch. Elektrotech., Vol. 65, No. 1-2, 97-106, Jan. 1982.
doi:10.1007/BF01476700 Google Scholar

2. Lee, S. and R. C. Menendez, "Force on current coils moving over a conducting sheet with applications to magnetic levitation," Proc. IEEE, Vol. 62, No. 5, 567-577, May 1974.
doi:10.1109/PROC.1974.9481 Google Scholar

3. Reitz, J. R. and L. C. Davis, "Force on a rectangular coil moving above a conducting slab," J. Appl. Phys., Vol. 43, No. 4, 1547-1553, Apr. 1972.
doi:10.1063/1.1661359 Google Scholar

4. Borcherts, R. H. and L. C. Davis, "Force on a coil moving over a conducting surface including edge and channel effects," J. Appl. Phys., Vol. 43, No. 5, 2418-2427, May 1972.
doi:10.1063/1.1661513 Google Scholar

5. Freeman, E. M. and C. Papageorgiou, "Spatial Fourier transforms: A new view of end effects in linear induction motors," Proc. IEE, Vol. 125, No. 8, 747-753, Aug. 1978. Google Scholar

6. Yamamura, S., Theory of Linear Induction Motors, University of Tokyo Press, 1979.

7. Panas, S. M. and E. E. Kriezis, "Determination of the field and the forces on a current filament moving above a conducting plate," Arch. Elektrotech., Vol. 68, No. 4, 293-298, 1985.
doi:10.1007/BF01845942 Google Scholar

8. Paudel, N. and J. Z. Bird, "General 2D steady-state force and power equations for a traveling time-varying magnetic source above a conductive plate," IEEE Trans. Mag., Vol. 48, No. 1, 95-100, Jan. 2012.
doi:10.1109/TMAG.2011.2161638 Google Scholar

9. Davis, L. C. and D. F. Wilkie, "Analysis of motion of magnetic levitation systems: Implications for high-speed vehicles," J. Appl. Phy., Vol. 42, No. 12, 4779-4793, Nov. 1971.
doi:10.1063/1.1659855 Google Scholar

10. Moon, F. C., Superconducting Levitation, John Wiley & Sons, New York, 1994.

11. Fink, H. J. and C. E. Hobrecht, "Instability of vehicles levitated by eddy current repulsion-case of an infinitely long current loop," J. App. Phy., Vol. 42, No. 9, 3446-3450, Aug. 1971.
doi:10.1063/1.1660751 Google Scholar

12. Krakowski, M., "Eddy currents in a metallic disk and axial force on it due to suddenly applied magnetic field," Archiv fur Elektro., Vol. 65, No. 11-13, 1982. Google Scholar

13. Bird, J. and T. A. Lipo, "Calculating the forces created by an electrodynamic wheel using a 2D steady-state finite element model," IEEE Trans. Mag., Vol. 44, No. 3, 365-372, Mar. 2008.
doi:10.1109/TMAG.2007.913038 Google Scholar

14. Langerholc, J., "Electrodynamics of a magnetic levitation coil," J. App. Phy., Vol. 44, 2829-2837, 1973.
doi:10.1063/1.1662657 Google Scholar

15. Paudel, N., "Dynamic suspension modeling of an eddy-current device: An applicaiton to MAGLEV," , University of North Carolina at Charlotte, Charlotte, NC, 2012.
doi:10.2528/PIER06080903 Google Scholar

16. Faiz, J., "Time stepping finite element analysis of broken bars fault in a three-phase squirrel-cage induction motor," Progress In Electromagnetic Research, Vol. 68, 53-70, 2007. Google Scholar

17. Bedrosian, G., "High-performance computing for finite element methods in low-frequency electromagnetics," Progress In Electromagnetic Research, Vol. 7, 57-110, 1993.
doi:10.1109/20.92372 Google Scholar

18. Tsuboi, H., M. Tanaka, T. Misaki, and T. Naito, "Computation accuracies of boundary element method and finite element method in transient eddy current analysis," IEEE Trans. Mag., Vol. 24, No. 6, 3174-3176, Nov. 1988. Google Scholar

19. Paudel, N., J. Z. Bird, S. Paul, and D. Bobba, "Modeling the dynamic suspension behavior of an eddy current device," IEEE Energy Conv. Cong. Exp., 1692-1699, Phoenix, AZ, Sep. 17-22, 2011.
doi:10.2528/PIERB08022010 Google Scholar

20. Lindell, I. V. and A. H. Sihvola, "Reflection and transmission of waves at the interface of perfect electromagnetic conductor," Progress In Electromagnetic Research B, Vol. 5, 169-183, 2008.
doi:10.1177/0583102404048517 Google Scholar

21. Sodano, H. A. and J. Bae, "Eddy current damping in structures," Shock Vib. Dig., Vol. 36, 469-478, Nov. 2004.
doi:10.1109/JPROC.2009.2030231 Google Scholar

22. Thompson, M. T., "Practical issues in the use of NdFeB permanent magnets in maglev, motors, bearings, and eddy current breaks," Proc. IEEE, Vol. 97, No. 11, 1758-1767, Nov. 2009.
doi:10.1109/JPROC.2009.2030249 Google Scholar

23. Hellinger, R. and P. Mnich, "Linear motor-powered transportation: History, present status, and future outlook," Proc. IEEE, Vol. 97, No. 11, 1892-1900, Nov. 2009.
doi:10.1109/TMAG.2009.2021160 Google Scholar

24. Bird, J. and T. A. Lipo, "Modeling the 3-D rotational and translational motion of a Halbach rotor above a split-sheet guideway," IEEE Trans. Mag., Vol. 45, No. 9, 3233-3242, Sep. 2009. Google Scholar

25. Kirpo, M., S. Tympel, T. Boeck, D. Krasnov, and A. Thess, "Electromagnetic drag on a magnetic dipole near a translating onducting bar," J. Appl. Phy., Vol. 109, No. 113921, 2011. Google Scholar

26. Williamson, S. and E. K. C. Chan, "Three-dimensional finite-element formulation for problems involving time-varying fields, relative motion, and magnetic saturation," Proc. IEE Part A, Vol. 140, No. 2, 121-130, Mar. 1993.
doi:10.1109/TMAG.2004.828933 Google Scholar

27. Xia, Z. P., Z. Q. Zhu, and D. Howe, "Analytical magnetic field analysis of Halbach magnetized permanent-magnet machines," IEEE Trans. Mag., Vol. 40, No. 4, 1864-1872, 2004. Google Scholar

28. Atallah, K., D. Howe, P. H. Mellor, and D. A. Stone, "Rotor loss in permanent-magnet brushless AC machines," IEEE Trans. Ind. Appl., Vol. 36, No. 6, 1612-1618, Nov./Dec. 2000.
doi:10.1109/20.123897 Google Scholar

29. Muramatsu, K., T. Nakata, N. Takahashi, and K. Fujiwara, "Comparison of coordinate systems for eddy current analysis in moving conductors," IEEE Trans. Mag., Vol. 28, 1186-1189, 1992. Google Scholar

30. Polyanin, A. D. and A. V. Manzhirov, Handbook of Mathematics for Engineers and Scientists, Chapman & Hall, 2007.

31. Freeman, E. M. and C. Papageorgiou, "Spatial Fourier transforms: A new view of end effects in linear induction motors," Proc. IEE, Vol. 125, No. 8, 747-753, Aug. 1978. Google Scholar

32. Griffiths Introduction to Electrodynamics, 3rd Edition, Prentice Hall, 1999.
doi:10.1007/BF01576117

33. Hannakam, L., "Transienter skineffekt in einer platte endlicher dicke bei beeliebiger form der erregenden leiterschleife," Arch. Elektrotech., Vol. 60, 361-371, 1978.
doi:10.1109/TMAG.2008.919482 Google Scholar

34. Theodoulidis, T., "Developments in calculating the transient eddy-current response from a conductive plate," IEEE Trans. Mag., Vol. 44, No. 7, 1894-1896, 2008. Google Scholar

35. Churchill, R. V., Operational Mathematics, 3rd Edition, McGraw-Hill, Inc., 1972.

Dr. Nirmal Paudel

Dr. Subhra Paul

Dr. Jonathan Z. Bird