2012-10-19
A Self-Controlled Maglev System
By
Progress In Electromagnetics Research M, Vol. 26, 187-203, 2012
Abstract
This paper presents a MAGLEV system in which the magnetic suspension is assured by the repulsion of permanent magnets both on the guideway and on the vehicle. Due to the induced currents on a aluminum sheet surrounding the magnets on the guideway, the system intrinsic instability is overcome. The detailed structure of the proposed system is described and the main results of the simulations by means a FE code are reported.
Citation
Francesca Di Puccio, Antonino Musolino, Rocco Rizzo, and Ernesto Tripodi, "A Self-Controlled Maglev System," Progress In Electromagnetics Research M, Vol. 26, 187-203, 2012.
doi:10.2528/PIERM12091009
References

1. Lee, , H. W., K. C. Kim, and J. Lee, "Review of maglev train technologies ," IEEE Trans. Magn., Vol. 42, No. 7, 1917-1925, Jul. 2006.        Google Scholar

2. Eastham, A. R. and W. F. Hayes, "Maglev systems development status," IEEE Aerosp. Electron. Syst. Mag., Vol. 3, No. 1, 21-30, Jan. 1988.
doi:10.1109/62.843        Google Scholar

3. Gutberlet, H., "The German magnetic transportation program ," IEEE Trans. Magn., Vol. 10, No. 3, 417-420, Sep. 1974.
doi:10.1109/TMAG.1974.1058431        Google Scholar

4. Meins, J., L. Miller, and W. J. Mayer, "The high speed Maglev transport system transrapid," IEEE Trans. Magn., Vol. 24, No. 2, 808-811, Mar. 1988.
doi:10.1109/20.11347        Google Scholar

5. Ono, M., S. Koga, H. Ohtsuki, and , "Japan's superconducting maglev train," IEEE Trans. Instrum. Meas. Magazine, Vol. 5, No. 1, 9-15, Mar. 2002.
doi:10.1109/5289.988732        Google Scholar

6. Tsuchiya, M. and H. Ohsaki, "Characteristics of electromagnetic force of EMS-type maglev vehicle using bulk superconductors," IEEE Trans. Magn., Vol. 36, No. 5, 3683-3685, Sep. 2000.
doi:10.1109/20.908940        Google Scholar

7. Hull, J. R., "Attractive levitation for high-speed ground transport with large guideway clearance and alternating-gradient stabilization," IEEE Trans. Magn., Vol. 25, No. 5, 3272-3274, Sep. 1989.
doi:10.1109/20.42275        Google Scholar

8. Bohn, G. and G. Steinmetz, "The electromagnetic levitation and guidance technology of the transrapid test facility Emsland," IEEE Trans. Magn., Vol. 20, No. 5, 1666-1671, Sep. 1984.
doi:10.1109/TMAG.1984.1063246        Google Scholar

9. Wang, J., S. Wang, et al. "Guidance forces on high temperature superconducting Maglev test vehicle," IEEE Trans. Appl. Supercond., Vol. 13, No. 2, 2154-2156, Jun. 2003.
doi:10.1109/TASC.2003.813022        Google Scholar

10. Wang, S., J. Wang, et al. "The man-loading high-temperature superconducting Maglev test vehicle," IEEE Trans. Appl. Supercond., Vol. 13, No. 2, 2134-2137, Jun. 2003.
doi:10.1109/TASC.2003.813017        Google Scholar

11. Sasakawa, T. and N. Tagawa, "Reduction of magnetic field in vehicle of superconducting maglev train," IEEE Trans. Magn., Vol. 36, No. 5, 3676-3679, Sep. 2000.
doi:10.1109/20.908938        Google Scholar

12. Di Majo, F. and G. Sciarrone, "The future of the very high speed transportations," CSST, CNR, Rome, 1987.        Google Scholar

13. Ausserlechner, U., "Closed analytical formulae for multi-pole magnetic rings," Progress In Electromagnetics Research B, Vol. 38, 71-105, 2012.        Google Scholar

14. Babic, S. and C. Akyel, "Magnetic force between inclined circular loops (Lorentz approach)," Progress In Electromagnetics Research B, Vol. 38, 333-349, 2012.        Google Scholar

15. Ravaud, R., G. Lemarquand, and V. Lemarquand, "Halbach structures for permanent magnets bearings," Progress In Electromagnetic Research M, Vol. 14, 263-277, 2010.
doi:10.2528/PIERM10100401        Google Scholar

16. Janssen, J. L. G., J. J. H. Paulides, and E. A. Lomonova, "Study of magnetic gravity compensator topologies using an abstraction in the analytical interaction equations," Progress In Electromagnetics Research, Vol. 128, 75-90, 2012.        Google Scholar

17. Earnshaw, S., "On the nature of molecular forces which regulate the constitution of luminofefeorus ether," Trans. Comb. Phil. Soc., Vol. 7, 97-112, 1842.        Google Scholar

18. Braunbek, W., "Freischwebende korper in elektishen und magnetishen feld," Z. Phisik, Vol. 112, 753-763, 1939.
doi:10.1007/BF01339979        Google Scholar

19. Bassani, R., "Permanent magnetic levitation and stability," Proceedings of NATO Advanced Study Institute on Fundamentals of Tribology etc., 899-913, Kluwer Academic Publishers, 2000.        Google Scholar

20. Bassani, R., E. Ciulli, F. Di Puccio, and A. Musolino, "Study of conic permanent magnet bearings," Meccanica, Vol. 36, No. 6, 745-754, 2001.
doi:10.1023/A:1016321525162        Google Scholar

21. Bekinal, S. I., T. R. Anil, and S. Jana, "Analysis of axially magnetized permanent magnet bearing characteristics," Progress In Electromagnetics Research B, Vol. 44, 327-343, 2012.        Google Scholar

22. Tozoni, O. V., "New stable magnetodynamic suspension system," IEEE Trans. Magn., Vol. 35, No. 2, 1047-1054, Mar. 1999.
doi:10.1109/20.748852        Google Scholar

23. Paudel, N., S. Paul, and J. Z. Bird, "General 2-D transient eddy current force equations for a magnetic source moving above a conductive plate," Progress In Electromagnetics Research B, Vol. 43, 255-277, 2012.        Google Scholar

24. Tokoro, H. and K. Uchida, "High energy product Nd-Fe-B sintered magnets produced by wet compacting process," IEEE Trans. Magn., Vol. 37, 2463-2466, Jul. 2001.        Google Scholar

25. Matrosov, V. M., et al. "A new passive maglev system based on eddy current stabilization," IEEE Trans. Magn., Vol. 45, No. 3, 984-987, Mar. 2009.
doi:10.1109/TMAG.2009.2012533        Google Scholar

26. EFFE User manual, Bathwick Electrical Design Ltd,UK,Sep. 2009.

27. MAGNET, http://www.infolytica.com/en/products/magnet/,2012.        Google Scholar

28. Musolino, A. and R. Rizzo, "Numerical analysis of brush commutation in helical coil electromagnetic launchers," IET Science, Measurement and Technology, Vol. 5, No. 4, 147-154, Jul. 2011.
doi:10.1049/iet-smt.2010.0098        Google Scholar

29. Musolino, A. and R. Rizzo, "Numerical modeling of helical launchers," IEEE Trans. Plasma Sci., Vol. 39, No. 3, 935-940, Mar. 2011.
doi:10.1109/TPS.2010.2102046        Google Scholar

30. Barmada, S., et al. "Force and torque evaluation in hybrid FEM-MOM formulations," IEEE Trans. Magn., Vol. 37, No. 5, 3108-3111, Sep. 2001.
doi:10.1109/20.952554        Google Scholar

31. Tripodi , E., et al. "Modeling of electromechanical devices by GPU-accelerated integral formulation," Int. J. Numer. Model., 1-21, Published online in Wiley Online Library(wileyonlinelibrary.com),2012, DOI:10.1002/jnm.1860.        Google Scholar

32. Tripodi, E., et al. "Acceleration of electromagnetic launchers modeling by using graphic processing unit," IEEE 16th EML Symposium Conference Proceedings, 1-6, Beijing, May 15-19,2012.        Google Scholar

33. Musolino, A., "Finite-element method/method of moments formulation for the analysis of current distribution in rail launchers," IEEE Trans. Magn., Vol. 41, No. 1, 387-392, 2005.
doi:10.1109/TMAG.2004.839268        Google Scholar

34. Raugi, M., et al. "3-D field analysis in tubular induction launchers with armature transverse motion," IEEE Trans. Magn., Vol. 35, No. 1, 154-159, 1999.
doi:10.1109/20.738394        Google Scholar

35. Rizzo, R., et al. "Numerical simulation of a complete generator-rail launch system," IEEE Trans. Magn., Vol. 41, No. 1, 369-374, 2005.
doi:10.1109/TMAG.2004.839267        Google Scholar

36. Rizzo, R., et al. "Analysis of the performance of a combined coil-rail launcher," IEEE Trans. Magn., Vol. 39, No. 1, 103-107, 2003.
doi:10.1109/TMAG.2002.805858        Google Scholar

37. Raugi, M., et al. "Analysis of the performance of a multi-stage pulsed linear induction launcher," IEEE Trans. Magn., Vol. 37, No. 1, 111-115, Jan. 2001..
doi:10.1109/20.911802        Google Scholar

38. Tucci, M., et al. "A wavelet based method for the analysis of impulsive noise due to switch commutations in Power Line Communication (PLC) systems," IEEE Trans. Smart Grid, Vol. 2, No. 1, 80-89, Mar. 2011.        Google Scholar

39. Tucci, M., et al. "Multi-resolution based sensitivity analysis of complex non-linear circuits," IET Circuits, Devices and Systems, Vol. 6, No. 3, 176-186, 2012.
doi:10.1049/iet-cds.2010.0429        Google Scholar

40. Jiang, Z. and R. E. Christenson, "A fully dynamic magneto-rheological fluid damper model," IOP Smart Mater. Struct., Vol. 21, 1-12, May 2012.        Google Scholar

41. Bicchi, A., et al. "Electromagnetic modeling and design of haptic interface prototypes based on magnetorheological fluids," IEEE Trans. Magn., Vol. 43, No. 9, 3586-3599, Sep. 2007.
doi:10.1109/TMAG.2007.901351        Google Scholar

42. Yan, L., "Suggestion for selection of maglev option for Beijing-Shanghai high-speed line," IEEE Trans. Appl. Supercond., Vol. 14, No. 2, 936-939, Jun. 2004.
doi:10.1109/TASC.2004.830324        Google Scholar