volume | PIER Journals

Abstract

A through wafer vertical micro-coaxial transition flushed in a silicon substrate has been designed, fabricated, and tested. The transition has been designed using radio frequency (RF) coaxial theory and consists of a 100μm inner diameter and a 300 μm outer diameter, which corresponded to a 1:3 inner/outer diameter ratio. The transition's through silicon structure has been achieved using standard photolithography techniques and Bosch's process for deep reactive ion etching (DRIE). The coaxial vias of the transition have been successfully metalized with a diluted silver paste using a novel filling method. To measure the behavior of the transition at high frequencies, coplanar waveguide (CPW) lines matched at 50 ohms have been integrated on the front and backside of the device. Measurement results show that the transition demonstrate good results with a reflection coefficient better than -10 dB at high frequencies from 15 GHz-to-60 GHz. Results also indicate that the transition has good signal transmission with less than -1.8 dB insertion loss up to 65 GHz. By eliminating the need for rigorous bonding techniques, the transition is a low-cost and durable design that can produce high input/output ratios ideal for commercial products.

1. Al-Sarawi, , S. F., et al. "A review of 3-D packaging technology IEEE Transactions on Components, Packaging, and Manufacturing Technology, Part B: Advanced Packaging,", Vol. 21, 2-14, 1998.
doi:10.1109/APSAR.2007.4418576 Google Scholar

2. Shen, , Y. and J. Zhou, "Design of vertical transition for broad-band T/R module applications with LTCC technology," 1st Asian and Paci¯c Conference on Synthetic Aperture Radar, APSAR 2007, 148-150, 2007.
doi:10.1109/LMWC.2006.877144 Google Scholar

3. Casares-Miranda, , F. P., et al. "Vertical microstrip transition for multilayer microwave circuits with decoupled passive andactive layers," IEEE Microwave and Wireless Components Letters, Vol. 16, 401-403, 2006.
doi:10.2528/PIER11110503 Google Scholar

4. Wu, , B. and H. L. Lo, "Methods and designs for improving the signal integrity of vertical interconnects in high performance packaging," Progress In Electromagnetics Research, Vol. 123, 1-11, 2012.
doi:10.2528/PIER06120503 Google Scholar

5. Xia, L., R.-M. Xu, and B. Yan, "LTCC interconnect modeling by support vector regression," Progress In Electromagnetics Research, Vol. 69, 67-75, 2007. Google Scholar

6. iu, Q., Y. Liu, Y. Wu, J. Shen, S. Li, C. Yu, and M. Su, "A substrate integrated waveguide to substrate integrated coaxial line transtion," Progress In Electromagnetics Research C, Vol. 36, 249-259, 2013. Google Scholar

7. Ramesham, , R. and R. Ghaffarian, "Challenges in interconnection and packaging of microelectromechanical systems (MEMS)," 2000 Proceedings, 50th Electronic Components & Technology Conference , 666-675, 2000. Google Scholar

8. Staiculescu, , D., et al. "Flip chip design rule development for multiple signal and ground bump confiurations," 2000 Asia-Pacific Microwave Conference, 136-139, 2000. Google Scholar

9. Crunelle, , R., et al., "Vertical coaxial transitions for MM-waves 3D integration technologies," 2010 European Microwave Conference (EuMC), 101-104, 2010.
doi:10.1109/LMWC.2009.2020016 Google Scholar

10. Yeo, , S.-K., et al. "Quasi-coaxial vertical via transitions for 3-D packages using anodized aluminum substrates," IEEE Microwave and Wireless Components Letters, Vol. 19, 365-367, 2009. Google Scholar

11. Amaya, , R. E., et al., "A broadband 3D vertical microstrip to stripline transition in LTCC using a quasi-coaxial structure for millimetre-wave SOP applications," 2010 European Microwave Conference (EuMC),, 109-112, 2010. Google Scholar

12. Wang, , Y., A. M. Abbosh, and B. Henin, "Wideband microwave crossover using double vertical microstrip-CPW interconnect," Progress In Electromagnetics Research C, Vol. 32, 109-122, 2012.
doi:10.1109/TADVP.2009.2014997 Google Scholar

13. Wu, , W.-C., et al., "Design, fabrication, and characterization of novel vertical coaxial transitions for flip-chip interconnects," IEEE Transactions on Advanced Packaging, Vol. 32, 362-371, 2009. Google Scholar

14. Pozar, D. M., Microwave Engineering, 3rd Ed., John Wiley & Sons, 2005.
doi:10.1109/JMEMS.2002.1007405

15. Chen, , K.-S., et al. "Effect of process parameters on the surface morphology and mechanical performance of silicon structures after deep reactive ion etching (DRIE)," Journal of roelectromechanical Systems, Vol. 11, 264-275, 2002.
doi:10.1109/JMEMS.2002.1007405 Google Scholar

16. Silver Paste.
doi:http://www.ferro.com/NR/rdonlyres/5-FC956E6-B357-475F-9970-B6C81 Google Scholar

17. Probe Tips.
doi:http://www.micromanipulator.com/products/product.php?item=15 Google Scholar

18. Ansys HFSS.
doi:http://www.ansys.com/Products/Simulation+Technology Google Scholar

19. AutoCAD.
doi:http://usa.autodesk.com/autocad/ Google Scholar

20. LaMeres, , B. J., et al. "Novel 3-D coaxial interconnect system for use in system-in-package applications," IEEE Transactions on Advanced Packaging, Vol. 33, 37-47, 2010. Google Scholar

Dr. Justin Boone

Dr. Subramanian Krishnan

Dr. Shekhar Bhansali