2015-09-17
Simulation of Magnetic Field Topology in a Saddle-Shaped Coil of Nuclear Quadrupole Resonance Spectrometer
By
Progress In Electromagnetics Research Letters, Vol. 56, 67-73, 2015
Abstract
A topology of high-frequency field intensity in the work area of a saddle-shaped coil for a nuclear qaudrupole resonance spectrometer was studied. With a view to determine magnetic field topology, a computational domain was created which is a model of a saddle-shaped coil physical structure. Finite element method was used to perform numerical simulation in COMSOL Multiphysics software. According to the results of calculations performed and the field maps obtained, the relative volume of coil work area was determined which makes 28.12% of its full volume. For such a volume the recommended size of samples under study is 12×18×10 mm3.
Citation
Andriy Samila, "Simulation of Magnetic Field Topology in a Saddle-Shaped Coil of Nuclear Quadrupole Resonance Spectrometer," Progress In Electromagnetics Research Letters, Vol. 56, 67-73, 2015.
doi:10.2528/PIERL15072306
References

1. Kyazym-Zade, A. G., A. A. Agaeva, V. M. Salmanov, and A. G. Mokhtari, "Optical detectors on GaSe and InSe layered crystals," Technical Physics, Vol. 52, No. 12, 1611-1613, 2007.
doi:10.1134/S1063784207120146        Google Scholar

2. Khandozhko, V., N. Raranskii, V. Balazjuk, Z. Kovalyuk, and A. Samila, "Temperature and baric dependence of nuclear quadruple resonance spectra in indium and gallium monoselenides," Proceedings of SPIE, Vol. 9066, 90661G-7, 2013.        Google Scholar

3. Schneider, H. and P. Dullenkopf, "Slotted tube resonator: A new NMR probe head at high observing frequencies," Review of Scientific Instruments, Vol. 48, No. 1, 68-73, 1977.
doi:10.1063/1.1134852        Google Scholar

4. Grechishkin, V. S. and N. Ya. Sinyavskii, "Remote nuclear quadrupole resonance in solids," Physics-Uspekhi (Advances in Physical Sciences), Vol. 36, No. 10, 980-1003, 1993.        Google Scholar

5. Brailovskyy, V. V., A. P. Samila, and O. G. Khandozhko, "Topology of high-frequency field strength of microwave spectrometer sensor coil," Visnyk of Lviv Polytechnic National University, No. 646, 46-51, 2009 (in Ukrainian).        Google Scholar

6. Hoult, D. I., "The NMR receiver: A description and analysis of design," Progress in NMR Spectroscopy, Vol. 12, No. 1, 41-77, 1978.
doi:10.1016/0079-6565(78)80002-8        Google Scholar

7., http://open.ifmo.ru/images/b/b6/144261 book.pdf.

8. Marrocco, B. J. D., D. J. Drost, and F. S. Prato, "An optimized head coil design for MR imaging at 0.15 T," Magnetic Resonance in Medicine, Vol. 5, No. 2, 143-159, 1987.
doi:10.1002/mrm.1910050206        Google Scholar

9. Glukhenkyi, O. I., Yu. M. Goryslavets, and A. V. Tokarevskyi, "Three-dimensional simulation of single-phase electromagnetic stirrer of liquid metal," Technical Electrodynamics, No. 5, 77-84, 2013 (in Russian).        Google Scholar

10., http://www.comsol.com/.

11. Glukhenkyi, O. I. and Yu. M. Goryslavets, "Scalar electric and vector magnetic potentials in theory of electromagnetic field," Technical Electrodynamics, No. 2, 7-8, 2012 (in Russian).        Google Scholar