2016-06-30
A Compact Quad-Band Bandpass Filter Using Multi-Mode Stub-Loaded Resonator
By
Progress In Electromagnetics Research Letters, Vol. 61, 39-46, 2016
Abstract
This paper presents a compact shorted stub-loaded quad-band bandpass filter. The proposed filter simultaneously operates at GSM (0.83-0.97 GHz), LTE2300 (2300-2400 MHz), WiMAX (3.3-3.7 GHz), and WLAN (5.725-5.825 GHz) bands. The filter has been designed using the technique of stub-loaded resonator (SLR). By changing the length of the center-loaded stub, the resonant frequency of the even-mode can be varied without affecting that of the odd-mode. This simplifies the design and tuning of the quad-band filter. Eight transmission zeros (TZs) around the three passband make the pass bands highly isolated. In order to validate its practicability, a quad-band bandpass filter (BPF) has been designed, fabricated and measured. Good agreement between simulated and measured results is observed.
Citation
Lakhindar Murmu, and Sushrut Das, "A Compact Quad-Band Bandpass Filter Using Multi-Mode Stub-Loaded Resonator," Progress In Electromagnetics Research Letters, Vol. 61, 39-46, 2016.
doi:10.2528/PIERL16050610
References

1. Zhang, X. Y., J.-X. Chen, and Q. Xue, "Dual-band bandpass filters using stub-loaded resonators," IEEE Microwave and Wireless Components Letters, Vol. 17, No. 8, 583-585, August 2007.
doi:10.1109/LMWC.2007.901768        Google Scholar

2. Lai, X., C.-H. Liang, H. Di, and B. Wu, "Design of tri-band filter based on stub loaded resonator and DGS resonator," IEEE Microwave and Wireless Compon Letters, Vol. 20, No. 5, 265-267, May 2010.
doi:10.1109/LMWC.2010.2045584        Google Scholar

3. Lan, S. W., M. H. Weng, and S. J. Chang, "A tri-band bandpass filter with wide stopband using asymmetric stub-loaded resonators," IEEE Microwave and Wireless Components Letters, Vol. 25, No. 1, 19-21, January 2015.
doi:10.1109/LMWC.2014.2365739        Google Scholar

4. Wei, F., Y. J. Guo, P.-Y. Qin, and X.W. Shi, "Compact balanced dual- and tri-band bandpass filtersbased on stub loaded resonators ," IEEE Microwave and Wireless Components Letters, Vol. 25, No. 2, 76-78, February 2015.
doi:10.1109/LMWC.2014.2370233        Google Scholar

5. Murmu, L. and S. Das, "A dual-band bandpass filter for 2.4GHz bluetooth and 5.2GHz WLAN applications," Progress In Electromagnetics Research Letters, Vol. 53, 65-70, 2015.
doi:10.2528/PIERL15041601        Google Scholar

6. Quendo, C., A. Manchec, Y. Clavet, E. Rius, J.-F. Favennec, and C. Person, "General synthesis of N-band resonator based on norder dual behavior resonator," IEEE Microwave and Wireless Components Letters, Vol. 17, No. 5, 337-339, May 2007.
doi:10.1109/LMWC.2007.895697        Google Scholar

7. Zhang, Y., K. A. Zaki, J. A. Ruiz-Cruz, and A. E. Atia, "Analytical synthesis of generalized multi-band microwave filters," IEEE MTT-S Int. Microwave Symp. Dig., 1273-1276, June 2007.        Google Scholar

8. Hejazi, Z. M., "A fast design approach of compact microstrip multiband bandpass filters," Microwave and Optical Technology Letters, Vol. 54, No. 4, 1075-1079, April 2012.
doi:10.1002/mop.26742        Google Scholar

9. Wu, J. Y. and W. H. Tu, "Design of quad-band bandpass filter with multiple transmission zeros," Electronics Letters, Vol. 47, No. 8, 502-503, April 2011.
doi:10.1049/el.2011.0052        Google Scholar

10. Cheng, C.-M. and C.-F. Yang, "Develop quad-band (1.57/2.45/3.5/5.2 GHz) bandpass filters on the ceramic substrate," IEEE Microwave and Wireless Components Letters, Vol. 20, No. 5, 268-270, May 2010.
doi:10.1109/LMWC.2010.2045585        Google Scholar

11. Cho, Y. H. and S. W. Yun, "A tri-band bandpass filter using stub-loaded SIRs with controllable bandwidths," Microwave and Optical Technology Letters, Vol. 56, No. 12, 2907-2910, December 2014.
doi:10.1002/mop.28734        Google Scholar

12. Mo, Y., K. Song, and Y. Fan, "Miniaturized triple-band bandpass filter using coupled lines and grounded stepped impedance resonators," IEEE Microwave and Wireless Components Letters, Vol. 24, No. 5, 333-335, May 2014.
doi:10.1109/LMWC.2014.2310458        Google Scholar

13. Ching-Her, L., C. I. G. Hsu, and H. Chih-Chan, "Balanced dual-band BPF with stub-loaded SIRs for common-mode suppression," IEEE Microwave and Wireless Components Letters, Vol. 20, No. 2, 70-72, February 2010.
doi:10.1109/LMWC.2009.2038433        Google Scholar

14. Jin, S. and X. Quan, "Novel balanced dual-band bandpass filter using coupled stepped-impedance resonators," IEEE Microwave and Wireless Components Letters, Vol. 20, No. 1, 19-21, January 2010.
doi:10.1109/LMWC.2009.2035954        Google Scholar

15. Wei, W. H. and Y. R. Yuan, "A new quadband bandpass filter using asymmetric stepped impedance resonators," IEEE Microwave and Wireless Components Letters, Vol. 21, No. 4, 203-205, April 2011.
doi:10.1109/LMWC.2011.2106153        Google Scholar

16. Wei, F., Q. L. Huang, W.-T. Li, and X.-W. Shi, "A compact quadband bandpass filter using novel stub loaded SIR structure," Microwave and Optical Technology Letters, Vol. 56, No. 3, 538-542, March 2014.
doi:10.1002/mop.28160        Google Scholar

17. Xu, J., W. Wu, and C. Miao, "Compact microstrip dual-/tri-/quad-band bandpass filter using open stubs loaded shorted stepped-impedance resonator," IEEE Transactions on Microwave Theory and Techniques, Vol. 61, No. 9, 3187-3199, September 2013.
doi:10.1109/TMTT.2013.2273759        Google Scholar