2018-05-09
Design and Characterization of Square Patch Salisbury Screen Microwave Absorber
By
Progress In Electromagnetics Research Letters, Vol. 76, 7-12, 2018
Abstract
The work presents an inventive, simple and implementable design approach to enhance the bandwidth of conventional Salisbury Screen Microwave Absorber (SSMA). Theoretically, the maximum fractional bandwidth of SSMA for FR4 substrate with an optimum sheet resistivity of 308 Ω/sq for -10 dB reflection is nearly 42.1%. In comparison, the bandwidth for square patch based SSMA is 59.7% with the same thickness. The design comprises square patches of SSMA placed periodically on a metal sheet. The square patches consist of an FR4 substrate and a 200 Ω/sq resistive sheet. A single reflection null is observed in the SSMA due to λ/4 resonance whereas in the proposed absorber an additional resonant mode is introduced due to coupling between the nearby patches. The simultaneous overlapping of the λ/4 mode and the additional coupling mode results in bandwidth extension. The close agreement between the simulation and measurement data is observed.
Citation
Amit Bhati, Kirankumar Rajshekhar Hiremath, and Vivek Dixit, "Design and Characterization of Square Patch Salisbury Screen Microwave Absorber," Progress In Electromagnetics Research Letters, Vol. 76, 7-12, 2018.
doi:10.2528/PIERL18032402
References

1. Watts, C. M., X. Liu, and W. J. Padilla, "Metamaterial electromagnetic wave absorbers," Adv. Mater., Vol. 24, OP98-OP120, 2012.        Google Scholar

2. Chambers, B., "Optimum design of a Salisbury screen radar absorber," Electronics Letters, Vol. 30, No. 16, 1353-1354, 1994.
doi:10.1049/el:19940896        Google Scholar

3. Saville, P., Review of Radar Absorbing Materials, Defence Research & Development Atlantic Dartmouth, 2005.

4. Qin, F. and C. Brosseau, "A review and analysis of microwave absorption in polymer composites filled with carbonaceous particles," Journal of Applied Physics, Vol. 111, 061301, 2012.
doi:10.1063/1.3688435        Google Scholar

5. Landy, N. I., S. Sajuyigbe, J. J. Mock, D. R. Smith, and W. J. Padilla, "Perfect metamaterial absorber," Phys. Rev. Lett., Vol. 100, 207402, 2008.
doi:10.1103/PhysRevLett.100.207402        Google Scholar

6. Lin, B., B. Wang, W. Meng, X. Da, W. Li, Y. Fang, and Z. Zhu, "Dual-band high-efficiency polarization converter using an anisotropic metasurface," Journal of Applied Physics, Vol. 119, 183103, 2016.
doi:10.1063/1.4948957        Google Scholar

7. Bhati, A., K. R. Hiremath, and V. Dixit, "Square patch-based dielectric microwave absorber," Progress In Electromagnetics Research M, Vol. 63, 13-21, 2018.
doi:10.2528/PIERM17092402        Google Scholar

8. Bhati, A., K. R. Hiremath, and V. Dixit, "Bandwidth enhancement of Salisbury screen micro-wave absorber using wire metamaterial," Microw. Opt. Technol. Lett., Vol. 60, 891-897, 2018.
doi:10.1002/mop.31078        Google Scholar

9. Luukkonen, O., F. Costa, C. R. Simovski, A. Monorchio, and S. A. Tretyakov, "A thin electromagnetic absorber for wide incidence angles and both polarizations," IEEE Transactions on Antennas and Propagation, Vol. 57, No. 10, 3119-3125, 2009.
doi:10.1109/TAP.2009.2028601        Google Scholar

10. Costa, F., A. Monorchio, and G. Manara, "Analysis and design of ultra thin electromagnetic absorbers comprising resistively loaded high impedance surfaces," IEEE Transactions on Antennas and Propagation, Vol. 58, No. 5, 1551-1558, 2010.
doi:10.1109/TAP.2010.2044329        Google Scholar

11. Seman, F. C., R. Cahill, V. F. Fusco, and G. Goussetis, "Design of a Salisbury screen absorber using frequency selective surfaces to improve bandwidth and angular stability performance," IET Microwaves, Antennas & Propagation, Vol. 5, No. 2, 149-156, 2011.
doi:10.1049/iet-map.2010.0072        Google Scholar

12. Kim, J. B. and J. H. Byun, "Salisbury screen absorbers of dielectric lossy sheets of carbon nanocomposite laminates," IEEE Transactions on Electromagnetic Compatibility, Vol. 54, No. 1, 37-42, 2012.
doi:10.1109/TEMC.2011.2172983        Google Scholar

13. Seman, F. C., R. Cahill, and V. Fusco, "Performance enhancement of Salisbury screen absorber using a resistively loaded high impedance ground plane," Proceedings of the Fourth European Conference on Antennas and Propagation, IEEE, 2010.        Google Scholar

14. Seman, F. C. and C. Robert, "Performance enhancement of Salisbury screen absorber using resistively loaded spiral FSS," Microwave and Optical Technology Letters, Vol. 53, 1538-1541, 2011.
doi:10.1002/mop.26040        Google Scholar