2019-04-10
Universal Compensation Method for Trans-Directional Coupled-Line Based Planar Balun with Connecting Segment
By
Progress In Electromagnetics Research Letters, Vol. 83, 91-97, 2019
Abstract
In the paper, a universal compensation method is presented to improve the imbalance of a trans-directional coupled-line (TRD-CL) based balun caused by the inevitable physical separation between the TRD-CLs. Using this method, the input mismatch and output imbalance can be effectively solved. Moreover, since the compensation is achieved by shortening the two TRD-CLs instead of adding additional stubs, size miniaturization is maintained. Design formulas are derived using the signal flowchart and even-odd mode analysis. A prototype operating at 1.6 GHz is also designed and measured to verify the proposed method.
Citation
Xiao Jia, Shao-Jun Fang, Hongmei Liu, and Zhongbao Wang, "Universal Compensation Method for Trans-Directional Coupled-Line Based Planar Balun with Connecting Segment," Progress In Electromagnetics Research Letters, Vol. 83, 91-97, 2019.
doi:10.2528/PIERL19013003
References

1. Tseng, S. C., C.Meng, C. Chang, C. Wu, and G. Huang, "Monolithic broadband Gilbert micromixer with an integrated Marchand balun using standard silicon IC process," IEEE Transactions on Microwave Theory and Techniques, Vol. 54, No. 12, 4362-4371, 2006.
doi:10.1109/TMTT.2006.884690        Google Scholar

2. Lai, Y., C. Chen, and Y. Wang, "Compact doubler with simple harmonic suppression and gain-compensation functions," IEEE Microwave and Wireless Components Letters, Vol. 21, No. 7, 371-373, 2011.
doi:10.1109/LMWC.2011.2152383        Google Scholar

3. Yeung, L. K. and K.Wu, "A dual-band coupled-line balun filter," IEEE Transactions on Microwave Theory and Techniques, Vol. 55, No. 11, 2406-2411, 2007.
doi:10.1109/TMTT.2007.907402        Google Scholar

4. Lin, S., J. Wang, Y. Deng, and G. Zhang, "A new compact ultra-wideband balun for printed balanced antennas," Journal of Electromagnetic Waves and Applications, Vol. 29, No. 12, 1570-1579, 2019.
doi:10.1080/09205071.2015.1051191        Google Scholar

5. Sánchez, A. M., M. Ribó, L. Pradell, J. Anguera, and A. Andújar, "CPW balun for printed balanced antennas," Electronics Letters, Vol. 50, No. 11, 785-786, 2014.
doi:10.1049/el.2014.0907        Google Scholar

6. Zhang, G., J. Wang, and W. Wu, "Wideband balun bandpass filter explored for a balanced dipole antenna with high selectivity," Electronics Letters, Vol. 52, No. 13, 1153-1155, 2016.
doi:10.1049/el.2016.0716        Google Scholar

7. Ang, K. S. and I. D. Robertson, "Analysis and design of impedance-transforming planar Marchand baluns," IEEE Transactions on Microwave Theory and Techniques, Vol. 49, No. 2, 402-406, 2001.
doi:10.1109/22.903108        Google Scholar

8. Ahn, H. and S. Nam, "New design formulas for impedance-transforming 3-dB Marchand baluns," IEEE Transactions on Microwave Theory and Techniques, Vol. 59, No. 11, 2816-2823, 2011.
doi:10.1109/TMTT.2011.2164618        Google Scholar

9. Ahn, H. and T. Itoh, "New isolation circuits of compact impedance-transforming 3-dB baluns for theoretically perfect isolation and matching," IEEE Transactions on Microwave Theory and Techniques, Vol. 58, No. 12, 3892-3902, 2010.        Google Scholar

10. Ang, K. S., Y. C. Leong, and C. H. Lee, "Analysis and design of miniaturized lumped-distributed impedance-transforming baluns," IEEE Transactions on Microwave Theory and Techniques, Vol. 51, No. 3, 1009-1017, 2003.
doi:10.1109/TMTT.2003.808677        Google Scholar

11. Shie, C., Y. Pan, K. Chin, and Y. Chiang, "A miniaturized microstrip balun constructed with two λ/8 coupled lines and a redundant line," IEEE Microwave and Wireless Components Letters, Vol. 20, No. 12, 663-665, 2010.
doi:10.1109/LMWC.2010.2084076        Google Scholar

12. Shie, C., J. Cheng, S. Chou, and Y. Chiang, "Design of a new type planar balun by using trans-directional couplers," IEEE Transactions on Microwave Theory and Techniques, Vol. 60, No. 3, 471-476, 2012.
doi:10.1109/TMTT.2011.2176139        Google Scholar

13. Ma, T., C. Wang, and C. Lai, "Miniaturized distributed Marchand balun using coupled synthesized CPWs," IEEE Microwave and Wireless Components Letters, Vol. 21, No. 4, 188-190, 2011.
doi:10.1109/LMWC.2011.2109055        Google Scholar

14. Lin, C., C. Wu, G. Zhou, and T. Ma, "General compensation method for a Marchand balunwith an arbitrary connecting segment between the balance ports," IEEE Transactions on Microwave Theory and Techniques, Vol. 61, No. 8, 2821-2830, 2013.
doi:10.1109/TMTT.2013.2268057        Google Scholar

15. Ahn, H. and M. M. Tentzeris, "Novel generic asymmetric and symmetric equivalent circuits of 90◦ coupled transmission-line sections applicable to Marchand baluns," IEEE Transactions on Microwave Theory and Techniques, Vol. 65, No. 3, 746-760, 2017.
doi:10.1109/TMTT.2016.2633263        Google Scholar

16. Shie, C., J. Cheng, S. Chou, and Y. Chiang, "Transdirectional coupled-line couplers implemented by periodical shunt capacitors," IEEE Transactions on Microwave Theory and Techniques, Vol. 57, No. 12, 2981-2988, 2009.
doi:10.1109/TMTT.2009.2034219        Google Scholar

17. Pozar, D., Microwave Engineering, 3rd Ed., Wiley, New York, 2005.

18. Liu, H., S. Fang, Z. Wang, and T. Shao, "Coupled line trans-directional coupler with improved power distribution and phase performance," 2017 IEEE International Symposium on Radio-Frequency Integration Technology (RFIT), 126-128, Seoul, 2017.        Google Scholar