2020-04-27
Compact Balanced Bandpass Filter with High Selectivity Based on Two Coupled Dual-Mode Microstrip Loop Resonators
By
Progress In Electromagnetics Research Letters, Vol. 90, 143-149, 2020
Abstract
This letter proposes a novel single-layer fourth-order balanced bandpass filter based on two coupled dual-mode loop resonators. Two pairs of balanced input/output (IO) feeding lines with unequal arms are employed to excite the outside dual-mode loop resonator, and the inside dual-mode loop resonator with meander lines is coupled to the outside one. Under differential-mode (DM) operation, three finite transmission zeros (FTZs) can be produced and controlled. Under common mode (CM) operation, the rejection level can be controlled by the length of IO feeding arms. For the demonstration, a balanced dual-mode loop filter with the center frequency of 5.2 GHz is designed, fabricated, and measured. The proposed balanced filter has the advantages of compact size, high selectivity, wide stopband of DM response, and good CM suppression.
Citation
Xiao-Bang Ji, and Mi Yang, "Compact Balanced Bandpass Filter with High Selectivity Based on Two Coupled Dual-Mode Microstrip Loop Resonators," Progress In Electromagnetics Research Letters, Vol. 90, 143-149, 2020.
doi:10.2528/PIERL20011704
References

1. Wu, C., C. Wang, and C. H. Chen, "Balanced coupled-resonator bandpass filters using multisection resonators for common-mode suppression and stopband extension," IEEE Transactions on Microwave Theory and Techniques, Vol. 55, No. 8, 1756-1763, Aug. 2007.
doi:10.1109/TMTT.2007.901609        Google Scholar

2. Wu, C., C. Wang, and C. H. Chen, "Novel balanced coupled-line bandpass filters with common-mode noise suppression," IEEE Transactions on Microwave Theory and Techniques, Vol. 55, No. 2, 287-295, Feb. 2007.
doi:10.1109/TMTT.2006.889147        Google Scholar

3. Wu, C., C. Wang, and C. H. Chen, "Stopband-extended balanced bandpass filter using coupled stepped-impedance resonators," IEEE Microwave and Wireless Components Letters, Vol. 17, No. 7, 507-509, Jul. 2007.
doi:10.1109/LMWC.2007.899311        Google Scholar

4. Yan, T., D. Lu, J. Wang, and X. Tang, "High-selectivity balanced bandpass filter with mixed electric and magnetic coupling," IEEE Microwave and Wireless Components Letters, Vol. 26, No. 6, 398-400, Jun. 2016.
doi:10.1109/LMWC.2016.2562110        Google Scholar

5. Feng, W. and W. Che, "Novel wideband differential bandpass filters based on T-shaped structure," IEEE Transactions on Microwave Theory and Techniques, Vol. 60, No. 6, 1560-1568, Jun. 2012.
doi:10.1109/TMTT.2012.2188538        Google Scholar

6. Shi, J. and Q. Xue, "Balanced bandpass filters using center-loaded half-wavelength resonators," IEEE Transactions on Microwave Theory and Techniques, Vol. 58, No. 4, 970-977, Apr. 2010.
doi:10.1109/TMTT.2010.2042839        Google Scholar

7. Gu, H., L. Ge, and L. Xu, "Simple dual-mode balanced bandpass filter with high selectivity and extended common-mode noise suppression," Electronics Letters, Vol. 54, No. 13, 833-835, Jun. 28, 2018.
doi:10.1049/el.2018.1246        Google Scholar

8. Guo, X., L. Zhu, and W. Wu, "A new concept of partial electric/magnetic walls for application in design of balanced bandpass filters," IEEE Transactions on Microwave Theory and Techniques, Vol. 67, No. 4, 1308-1315, 2019.
doi:10.1109/TMTT.2019.2892751        Google Scholar

9. Qiu, L. and Q. Chu, "Balanced bandpass filter using stub-loaded ring resonator and loaded coupled feed-line," IEEE Microw. Wireless Compon. Lett., Vol. 25, No. 10, 654-656, 2015.
doi:10.1109/LMWC.2015.2463228        Google Scholar

10. Feng, W., W. Che, and Q. Xue, "Balanced filters with wideband common mode suppression using dual-mode ring resonators," IEEE Trans. Circuits Syst. I, Reg. Papers, Vol. 62, No. 6, 1499-1507, 2015.
doi:10.1109/TCSI.2015.2423752        Google Scholar

11. Hong, J. S. and M. J. Lancaster, Microstrip Filters for RF/Microwave Applications, Wiley, 2001.
doi:10.1002/0471221619