2022-07-18
Compact Wideband Power Divider Based on Unequal-Width Three-Coupled-Lines
By
Progress In Electromagnetics Research Letters, Vol. 105, 33-39, 2022
Abstract
In the paper, a compact wideband power divider (PD) which consists of a λ/4 unequal width three-coupled-lines, four short-circuited stubs and an airbridge resistor is presented. By connecting the four short-circuited stubs to the input and output ports of the PD, two additional transmission poles are obtained, which results in enhanced bandwidth and improved selectivity. Rigorous design equations are given according to the even-odd mode analysis, and the design parameters are obtained based on particle swarm optimization. For validation, a prototype operating at 1 GHz is fabricated and tested. The experimental results indicate that the proposed power divider exhibits a return loss of more than 17.5 dB and an isolation of larger than 18.8 dB isolation in the fractional bandwidth of 91%.
Citation
Hongmei Liu, Yihan Ma, Siran Zhang, Shao-Jun Fang, and Zhongbao Wang, "Compact Wideband Power Divider Based on Unequal-Width Three-Coupled-Lines," Progress In Electromagnetics Research Letters, Vol. 105, 33-39, 2022.
doi:10.2528/PIERL22052601
References

1. Wilkinson, E. J., "An N-way hybrid power divider," IRE Trans. on Microwave Theory and Techniques, Vol. 8, No. 1, 116-118, Jan. 1960.
doi:10.1109/TMTT.1960.1124668        Google Scholar

2. Cohn, S. B., "A class of broadband three-port TEM-mode hybrids," IEEE Trans. on Microwave Theory and Techniques, Vol. 16, No. 2, 110-116, Feb. 1968.
doi:10.1109/TMTT.1968.1126617        Google Scholar

3. Bao, C., X. Wang, Z. Ma, C. P. Chen, and G. Lu, "An optimization algorithm in ultrawideband bandpass Wilkinson power divider for controllable equal-ripple level," IEEE Microwave and Wireless Components Letters, Vol. 30, No. 9, 861-864, Sep. 2020.
doi:10.1109/LMWC.2020.3011516        Google Scholar

4. Ahmed, U. and A. Abbosh, "Compact power divider for wideband in-phase and out-of-phase performances using parallel coupled lines," Electronics Letters, Vol. 53, No. 19, 1312-1314, 2017.
doi:10.1049/el.2017.2289        Google Scholar

5. Maktoomi, M. A., M. S. Hashmi, and F. M. Ghannouchi, "Theory and design of a novel wideband DC isolated Wilkinson power divider," IEEE Microwave and Wireless Components Letters, Vol. 26, No. 8, 586-588, Aug. 2016.
doi:10.1109/LMWC.2016.2585572        Google Scholar

6. Yu, T., "A broadband Wilkinson power divider based on the segmented structure," IEEE Trans. on Microwave Theory and Techniques, Vol. 66, No. 4, 1902-1911, Apr. 2018.
doi:10.1109/TMTT.2018.2799579        Google Scholar

7. Wong, S. W. and L. Zhu, "Ultra-wideband power divider with good in-band splitting and isolation performances," IEEE Microwave and Wireless Components Letters, Vol. 18, No. 8, 518-520, Aug. 2008.
doi:10.1109/LMWC.2008.2001009        Google Scholar

8. Zhang, B. and Y. A. Liu, "Wideband filtering power divider with high selectivity," Electronics Letters, Vol. 51, No. 23, 1950-1952, Nov. 2015.
doi:10.1049/el.2015.2706        Google Scholar

9. Liu, Y., L. Zhu, and S. Sun, "Proposal and design of a power divider with wideband power division and port-to-port isolation: A new topology," IEEE Trans. on Microwave Theory and Techniques, Vol. 68, No. 4, 1431-1438, Apr. 2020.
doi:10.1109/TMTT.2019.2955107        Google Scholar

10. Chen, M. T. and C. W. Tang, "Design of the filtering power divider with a wide passband and stopband," IEEE Microwave and Wireless Components Letters, Vol. 28, No. 7, 570-572, Jul. 2018.
doi:10.1109/LMWC.2018.2835446        Google Scholar

11. Jiao, L., Y. Wu, Y. Liu, Q. Xue, and Z. Ghassemlooy, "Wideband filtering power divider with embedded transversal signal-interference sections," IEEE Microwave and Wireless Components Letters, Vol. 27, No. 12, 1068-1070, Dec. 2017.
doi:10.1109/LMWC.2017.2758761        Google Scholar

12. Guo, L., H. Zhu, and A. M. Abbosh, "Wideband tunable in-phase power divider using three-line coupled structure," IEEE Microwave and Wireless Components Letters, Vol. 26, No. 6, 404-406, Jun. 2016.
doi:10.1109/LMWC.2016.2562058        Google Scholar

13. Dang, T. S., C. W. Kim, and S. W. Yoon, "Ultra-wideband power divider using three parallel-coupled lines and one shunt stub," Electronics Letters, Vol. 50, No. 2, 95-96, Jan. 2014.
doi:10.1049/el.2013.2290        Google Scholar

14. Xu, K. D., Y. Bai, X. Ren, and Q. Xue, "Broadband filtering power dividers using simple three-line coupled structures," IEEE Trans. on Components, Packaging and Manufacturing Technology, Vol. 9, No. 6, 1103-1110, Jun. 2019.
doi:10.1109/TCPMT.2018.2869077        Google Scholar

15. Zhu, H., Z. Cheng, and Y. J. Guo, "Design of wideband in-phase and out-of-phase power dividers using microstrip-to-slotline transitions and slotline resonators," IEEE Trans. on Microwave Theory and Techniques, Vol. 67, No. 4, 1412-1424, Apr. 2019.
doi:10.1109/TMTT.2019.2897928        Google Scholar

16. Song, K. and Q. Xue, "Novel ultra-wideband (UWB) multilayer slotline power divider with bandpass response," IEEE Microwave and Wireless Components Letters, Vol. 20, No. 1, 13-15, Jan. 2010.
doi:10.1109/LMWC.2009.2035951        Google Scholar

17. Kong, M., Y. Wu, Z. Zhuang, W. Wang, and C. Wang, "Ultraminiaturized wideband Quasi- Chebyshev/-Elliptic impedance-transforming power divider based on integrated passive device technology," IEEE Trans. on Plasma Science, Vol. 48, No. 4, 858-866, Apr. 2020.
doi:10.1109/TPS.2020.2980029        Google Scholar

18. Liu, H., Y. Ma, M. Guan, S. Fang, and Z. Wang, "Synthesis of miniaturized wideband four-way filtering power divider consisting of unequal-width three-coupled-lines," Int. J. RF Microw. Comput. Aided Eng., Vol. 31, No. 10, e22805, Oct. 2021.        Google Scholar

19. Muraguchi, M., T. Yukitake, and Y. Naito, "Optimum design of 3-dB branch-line couplers using microstrip lines," IEEE Trans. on Microwave Theory and Techniques, Vol. 31, No. 8, 674-678, Aug. 1983.
doi:10.1109/TMTT.1983.1131568        Google Scholar