volume | PIER Journals

2022-09-09

Monopole Antenna Design for UHF Circularly Polarized RFID Applications

Mariam Hossam Mohammed Helmi,

Dr. Mariam Hossam Mohammed Helmi

Electrical Engineering Department

The British University in Egypt

Egypt

Homepage

Hassan Ragheb

Professor Hassan Ragheb

Department of Electrical Engineering

The British University in Egypt

Egypt

Homepage

Progress In Electromagnetics Research Letters, Vol. 106, 81-88, 2022

doi:10.2528/PIERL22060210 | Google Scholar

Abstract

Radio Frequency Identification (RFID) technology is one of the simplest forms of wireless communication systems. It is a unique concept that aims to connect and identify tagged assets or objects to RFID readers to collect information. This paper presents the design and implementation of a compact dual-band RFID applications. The proposed design is a microstrip anetnna composed of two coupled armed meander-lines having 90° between them to achieve circular polarization. The proposed design is mounted on a 1.6 mm thick FR4-epoxy substrate backed by a partial ground plane with the total area of (58 x 80 mm²) to ensure compact size of the tag. The designed antenna is fed through a 50-ohm transmission line of length 28.5 mm. The antenna is considered dual bands that resonate at 850 MHz and 1.5 GHz and radiates circularly polarized waves with axial ratio about 1.4. The simulation results using HFSS software showed promising performance with a bandwidth of 141 MHz at center frequency 850 MHz and 287 MHz at centre frequency 1.5 GHz, respectively after optimizing the proposed design of the tag antenna. The S₁₁ parameter shows return loss at -21 dB at 850 MHz band while at the higher frequency the return loss is much better which was -39 dB. The design provides a perfectly omnidirectional radiation pattern and high radiation efficiency of 93%. Fabrication of the proposed design is done with practical results having a similar trend to the simulated ones to convey good performance of the designed antenna.

Download Full Article (846) View Full Article volume

Citation

Copy Export

Mariam Hossam Mohammed Helmi, and Hassan Ragheb, "Monopole Antenna Design for UHF Circularly Polarized RFID Applications," Progress In Electromagnetics Research Letters, Vol. 106, 81-88, 2022.
doi:10.2528/PIERL22060210

References

1. Jizat, N. M., S. K. A. Rahim, Y. C. Lo, and M. M. Mansor, "Compact size of CPW dual-band meander-line transparent antenna for WLAN applications," 2014 IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE), Johor Bahru, Johor, Malaysia, Dec. 8-10, 2014. Google Scholar

2. Deleruyelle, T., P. Pannier, E. Bergeret, and S. Bourdel, "Dual band UHF and microwave RFID antenna," 2008 European Conference on Wireless Technology, Amsterdam, Netherlands, 2008. Google Scholar

3. Kalyan, M. and A. Samanta, "Compact multiband monopole antenna for ISM band 2.4 GHz, Bluetooth, WiMAX, WiFi applications," Wireless Personal Communications, Vol. 97, 181-195, 2017.
doi:10.1007/s11277-017-4500-0 Google Scholar

4. Feliziani, M. and F. Maradei, "Antenna design of a UHF RFID tag for human tracking avoiding spurious emission," 2012 IEEE International Symposium on Electromagnetic Compatibility, IEEE, 2012. Google Scholar

5. Crişan, N., "Laminated glass UHF-RFID antenna for automotive applications," Carpathian Journal of Electronic and Computer Engineering, 2019. Google Scholar

6. Bharti, P. K., G. K. Pandey, H. S. Singh, and M. K. Meshram, "A compact multiband planar monopole antenna for slim mobile handset applications," Progress In Electromagnetics Research B, Vol. 61, 31-42, 2014.
doi:10.2528/PIERB14062706 Google Scholar

7. Mekki, A. S., M. N. Hamidon, A. Ismail, and A. R. H. Alhawari, "Gain enhancement of a microstrip patch antenna using a reflecting layer," Journal of Antenna and Propagation, Vol. 2015, Article ID 975263, 2015. Google Scholar