2009-02-03
An Embedded Isolation Moat Structures with Wide Stopband and Low Parasitic Effect for Elimination Simultaneous Switching Noise
By
Progress In Electromagnetics Research Letters, Vol. 6, 91-98, 2009
Abstract
In this letter, we use two embedded isolation moats which have different size to obtain the wide stopband elimination performance. The proposed structure is realized by embedding the double isolation moats between power and ground planes. The suppression frequency range of the proposed structures is from 1.2 to 7.2 GHz and the peak noise improvement in time domain is 36%. Furthermore, the proposed structure uses two elimination cells to avoid the parasitic effect generated in the frequency range of several hundred MHz.
Citation
Chin-Sheng Chang, Mau-Phon Houng, Na-Fu Wang, and Lih-Shan Chen, "An Embedded Isolation Moat Structures with Wide Stopband and Low Parasitic Effect for Elimination Simultaneous Switching Noise," Progress In Electromagnetics Research Letters, Vol. 6, 91-98, 2009.
doi:10.2528/PIERL08122305
References

1. Rogers, S. D., "Electromagnetic-bandgap layers for broad-band suppression of TEM modes in power planes," IEEE Trans. Microw. Theory Tech., Vol. 53, No. 8, 2495-2505, Aug. 2005.
doi:10.1109/TMTT.2005.852776        Google Scholar

2. Archambeault, B. and A. E. Ruehli, "Analysis of power ground plane EMI decoupling performance using the partial element equivalent circuit technique," IEEE Trans. Electromagn. Compat., Vol. 43, No. 4, 437-445, Nov. 2001.
doi:10.1109/15.974623        Google Scholar

3. Archambeault, B., "Analyzing power ground/plane decoupling performance using the partial element equivalent circuit simulation technique," Proceedings of IEEE International Symposium on Electromagnetic Compatibility, 779-784, Aug. 21-25, 2000.        Google Scholar

4. Hwang, J. N. and T. L. Wu, "The bridging effect of the isolation moat on the EMI caused by ground bounce noise between power ground planes of PCB," Proceedings of IEEE International Symposium on Electromagnetic Compatibility, 471-474, Aug. 13-17, 2001.        Google Scholar

5. Moghadasi, S. M., A. R. Attari, and M. M. Mirsalehi, "Compact and wideband 1-D mushroom-like EBG filters," Progress In Electromagnetics Research, Vol. 83, 323-333, 2008.
doi:10.2528/PIER08050101        Google Scholar

6. Li, L., C.-H. Liang, and C. H. Chan, "Waveguide end-slot phased array antenna integrated with electromagnetic bandgap structures," Progress In Electromagnetics Research, Vol. 21, 161-174, 2007.        Google Scholar

7. Wu, T. L., C. C. Wang, Y. H. Lin, T. K. Wang, and G. Chang, "A novel power plane with super-wideband elimination of ground bounce noise on high speedcircuits," IEEE Microw. Wireless Compon. Lett., Vol. 15, No. 3, 174-176, Mar. 2005.
doi:10.1109/LMWC.2005.844216        Google Scholar

8. Kamgaing, T. and O. M. Ramahi, "A novel power plane with integratedsim ultaneous switching noise mitigation capability using high impedance surface," IEEE Microw. Wireless Compon. Lett., Vol. 13, No. 1, 21-23, Jan. 2003.
doi:10.1109/LMWC.2002.807713        Google Scholar

9. Chang, C. S., D. B. Lin, K. C. Hung, I. T. Tang, and M. P. Houng, "Simultaneous switching noise mitigation capability with low parasitic effect using aperiodic high-impedance surface structure," Progress In Electromagnetics Research Letters, Vol. 4, 149-158, 2008.
doi:10.2528/PIERL08082902        Google Scholar

10. Qin, J. and O. M. Ramahi, "Ultra-widebandmitigation of simultaneous switching noise using novel planar electromagnetic bandgap structures," IEEE Microw. Wireless Compon. Lett., Vol. 16, No. 9, 487-489, Sept. 2006.
doi:10.1109/LMWC.2006.880713        Google Scholar

11. Park, J., A. C. W. Lu, K. M. Chua, L. L. Wai, J. Lee, and J. Kim, "Double-stacked EBG structure for wideband suppression of simultaneous switching noise in LTCC-based SiP applications," IEEE Microw. Wireless Compon. Lett., Vol. 16, No. 9, 481-483, Sept. 2006.
doi:10.1109/LMWC.2006.880719        Google Scholar