2009-05-12
Microstrip Band-Reject Filter Based on Inter-Digital Capacitance Loaded Loop Resonators
By
Progress In Electromagnetics Research Letters, Vol. 8, 93-103, 2009
Abstract
In this paper, the inter-digital capacitance loaded loop resonators (IDCLLRs) are proposed to design microstrip band-reject filters. The analyzed structures are based on the coupling of IDCLLRs to a conventional 50 Ω microstrip transmission line. We have firstly studied the frequency response of one-stage IDCLLR-loaded microstrip transmission line. The main fratures of the IDCLLRs are small dimensions (much smaller than the wavelength at resonance) and more structural parameters (provide flexibility in design); Then a 6-stage IDCLLR-based microstip band-reject filter was designed and fabricated, it performs relative rejection bandwidth of 8.1% and rejection level of 23 dB. This stop-band is resulted from presence of the artificial medium with negative effective permeability (μeff<0). In addition, it is easy to control the rejection bandwidth by only employing different length of inter-digital fingers (for multiple tuning). A 9-stage band-reject filter with multiple tuned IDCLLRs has been fabricated and tested, its relative rejection bandwidth is extended to 11.5%. Simulated and measured results are presented.
Citation
Yi Peng, and Wen-Xun Zhang, "Microstrip Band-Reject Filter Based on Inter-Digital Capacitance Loaded Loop Resonators," Progress In Electromagnetics Research Letters, Vol. 8, 93-103, 2009.
doi:10.2528/PIERL09031501
References

1. Pendry, J. B., A. J. Holden, D. J. Robbins, and W. J. Stewart, "Magnetism from conductors and enhanced nonlinear phenomena," IEEE Trans. Microw. Theory Tech., Vol. 47, No. 11, 2075-2084, Nov. 1999.
doi:10.1109/22.798002        Google Scholar

2. Marques, R., F. Mesa, J. Martel, and F. Medina, "Comparative analysis of edge- and broadside-coupled split ring resonators for metamaterial design---Theory and experiments," IEEE Transactions on Antennas and Propagation, Vol. 51, No. 10, 2572-2581, 2003.
doi:10.1109/TAP.2003.817562        Google Scholar

3. Baena, J. D., J. Bonache, F. Martin, R. Marques Sillero, F. Falcone, T. Lopetegi, M. A. G. Laso, J. Garcia-Garcia, I. Gil, M. F. Portillo, and M. Sorolla, "Equivalent-circuit models for split-ring resonators and complementary split-ring resonators coupled to planar ransmission lines," IEEE Trans. Microw. Theory Tech., Vol. 53, No. 4, 1451-1461, Apr. 2005.
doi:10.1109/TMTT.2005.845211        Google Scholar

4. Garcia-Garcia, J., J. Bonache, I. Gil, F. Martin, R. Marques, F. Falcone, T. Lopetegi, M. A. G. Laso, and M. Sorolla, "Comparison of electromagnetic band gap and split-ring resonator microstrip lines as stop band structures," Microwave and Optical Tech. Lett., Vol. 44, No. 4, 376-379, Feb. 20, 2005.
doi:10.1002/mop.20640        Google Scholar

5. Garcia-Garcia, J., F. Maretin, F. Falcone, J. Bonache, J. D. Baena, I. Gil, E. Amat, T. Lopetigi, M. A. G. Laso, M. A. M. Iturmendi, M. Sorolla, and R. Maraques, "Microwave filters with improved stopband based on sub-wavelength resonators," IEEE Trans. Microw. Theory Tech., Vol. 53, No. 6, 1997-2006, Jun. 2005.
doi:10.1109/TMTT.2005.848828        Google Scholar

6. Oznazı, V. and V. B. Erturk, "A comparative investigation of srr- and csrr-based band reject filters: Simulations, experiments, and discussions," Microwave and Optical Tech. Lett., Vol. 50, No. 2, 519-523, Feb. 2008.
doi:10.1002/mop.23119        Google Scholar

7. Falcone, F., F. Martin, J. Bonache, R. Marques, and M. Sorolla, "Coplanar waveguide structures loaded with split ring resonators," Microwave and Optical. Tech. Lett., Vol. 40, 3-6, Jan. 2004.
doi:10.1002/mop.11269        Google Scholar

8. Martin, F., F. Falcone, J. Bonache, R. Marques, and M. Sorolla, "Miniaturized coplanar waveguide stopband filters based on multiple tuned split ring resonators," IEEE Microw. Wireless Compon. Lett., Vol. 13, No. 12, 511-513, Dec. 2003.
doi:10.1109/LMWC.2003.819964        Google Scholar

9. Jelinek, L., J. Machac, and J. Zehentner, "A magnetic metamaterial composed of randomly oriented SRRs," PIERS Online, Vol. 2, No. 6, 624-627, 2006.
doi:10.2529/PIERS060831080303        Google Scholar

10. Erentok, A., P. L. Luljak, and R. W. Ziolkowski, "Characterization of a volumetric metamaterial realization of an artificial magnetic conductor for antenna applications," IEEE Transactions on Antennas and Propagation, Vol. 53, No. 1, 160-172, Jan. 2005.
doi:10.1109/TAP.2004.840534        Google Scholar

11. Schurig, D., J. J. Mock, B. J. Justice, S. A. Cummer, J. B. Pendry, A. F. Starr, and D. R. Smith, "Metamaterial electromagnetic cloak at microwave frequencies," Science, Vol. 314, 977-980, Nov. 10, 2006.
doi:10.1126/science.1133628        Google Scholar

12. Cheng, X. X., H. S. Chen, J. A. Kong, et al. "A bianisotropic left-handed metamaterials compose of S-ring resonator," PIERS Online, Vol. 3, No. 3, 241-245, 2007.
doi:10.2529/PIERS061126211441        Google Scholar

13. Khan, S. N., Q. L. Zhang, and S. He, "Left handed microstrip transmission line loaded with combination of split ring resonator and complementary-SRR," Journal of Electromagnetic Waves and Applications, Vol. 22, No. 13, 1857-1863, 2008.
doi:10.1163/156939308786375109        Google Scholar

14. Xiao, G., J. Mao, and B. Yuan, "An artificial magnetic material with interdigital structure," Proc. IEEE AP-S Int. Symp. Dig., Vol. 1, 2558-2561, Hawaii, USA, Jun. 10--15, 2007.

15. Alley, G. D., "Interdigital capacitors and their application to lumped-element microwave integrated circuits," IEEE Trans. Microw. Theory Tech., Vol. 18, No. 12, 1028-1033, 1970.
doi:10.1109/TMTT.1970.1127407        Google Scholar

16. Bahl, I. and P. Bhartia, Microwave Solid State Circuit Design, 2nd Ed., Wiley, 2003.