2009-11-27
A Novel Dual-Band Bandstop Waveguide Filter Using Split Ring Resonators
By
Progress In Electromagnetics Research Letters, Vol. 12, 133-139, 2009
Abstract
In this paper, the potential use of split ring resonators (SRRs) to design very compact dual-band bandstop waveguide filters is proposed. Two square SRRs are placed on a same transverse plane realizing two independent reject bands. By adjusting the SRRs length, the stopbands can be targeted at the desired frequencies. In addition, a simple circuit model for this resonator is introduced. Good agreement between the experimental and full-wave simulated results has been achieved.
Citation
Saeed Fallahzadeh, Hadi Bahrami, and Majid Tayarani, "A Novel Dual-Band Bandstop Waveguide Filter Using Split Ring Resonators," Progress In Electromagnetics Research Letters, Vol. 12, 133-139, 2009.
doi:10.2528/PIERL09103103
References

1. Pendry, J. B., A. J. Holden, D. J. Robbins, and W. J. Stewart, "Magnetism from conductors and enhanced nonlinear phenomena," IEEE Trans. Microw. Theory Tech., Vol. 47, 2075-2084, 1999.
doi:10.1109/22.798002        Google Scholar

2. Jitha, B., C. S. Nimisha, C. K. Aanandan, P. Mohanan, and K. Vasudevan, "SRR loaded waveguide band rejection filter with adjustable bandwidth," Microwave and Optical Technology Letters, Vol. 48, No. 7, 2006.
doi:10.1002/mop.21641        Google Scholar

3. Fallahzadeh, S., H. Bahrami, and M. Tayarani, "A very compact bandstop waveguide filter," Microwave Symposium Digest, 2009.        Google Scholar

4. Kehn, M. N. M., O. Quevedo-Teruel, and E. Rajo-Iglesias, "Split ring resonator loaded waveguides with multiple stopbands," Electronics Letters, Vol. 44, No. 12, June 2008.
doi:10.1049/el:20081108        Google Scholar

5. Yim, H.-Y. A. and K.-K. M. Cheng, "Novel dual-band planar resonator and admittance inverter for filter design and applications," IEEE MTT-S Int. Microwave Symp., Session THIF: Interactive Forum, June 2005.        Google Scholar

6. Han, S., X.-L. Wang, and Y. Fan, "Analysis and design of multiple-band bandstop filters," Progress In Electromagnetics Research, Vol. 70, 297-306, 2007.
doi:10.2528/PIER07020903        Google Scholar

7. Uchida, H., H. Kamino, K. Totani, N. Yoneda, M. Miyazaki, Y. Konishi, S. Makino, J. Hirokawa, and M. Ando, "Dual-band-rejection filter for distortion reduction in RF transmitters," IEEE Trans. Microwave Theory Tech., Vol. 52, No. 11, 2550-2551, Nov. 2004.
doi:10.1109/TMTT.2004.837161        Google Scholar

8. Fan, J.-W., C.-H. Liang, and X.-W. Dai, "Design of cross-coupled dual-band filter with equal-length split-ring resonators," Progress In Electromagnetics Research, Vol. 75, 285-293, 2007.
doi:10.2528/PIER07060904        Google Scholar