2011-09-06
A Compact, Planar Plate-Type Antenna for 2.4/5.2/5.8-GHz Tri-Band WLAN Operation
By
Progress In Electromagnetics Research Letters, Vol. 26, 125-134, 2011
Abstract
A novel, tri-band, planar plate-type antenna made of a compact metal plate for wireless local area network (WLAN) applications in the 2.4 GHz (2400-2484 MHz), 5.2 GHz (5150-5350 MHz), and 5.8 GHz (5725-5825 MHz) bands is presented. The antenna was designed in a way that the operating principle includes dipole and loop resonant modes to cover the 2.4/5.2 and 5.8 GHz bands, respectively. The antenna comprises a larger radiating arm and a smaller loop radiating arm, which are connected to each other at the signal ground point. The antenna can easily be fed by using a 50 Ω mini-coaxial cable and shows good radiation performance. Details of the design are described and discussed in the article.
Citation
Cheng-Tse Lee, Saou-Wen Su, and Fa-Shian Chang, "A Compact, Planar Plate-Type Antenna for 2.4/5.2/5.8-GHz Tri-Band WLAN Operation," Progress In Electromagnetics Research Letters, Vol. 26, 125-134, 2011.
doi:10.2528/PIERL11073004
References

1. Fang, C. Y., H. T. Chen, and K. L. Wong, "Printed uni-planar dual-band monopole antenna," Microwave Opt. Technol. Lett., Vol. 37, 452-454, 2003.
doi:10.1002/mop.10947        Google Scholar

2. Yang, H. Y., "Miniaturized dual-band printed antennas for wireless communications," IEEE Antennas Propagat. Soc. Int. Symp. Dig., Vol. 1A, 450-453, Washington, DC, 2005.        Google Scholar

3. Deepu, V., K. R. Rohith, J. Manoj, et al. "Compact uniplanar antenna for WLAN applications," Electron. Lett., Vol. 43, 70-72, 2007.
doi:10.1049/el:20073417        Google Scholar

4. Su, , S. W. and F. S. Chang, "Compact, printed mobile-unit antenna for 2.4 and 5 GHz WLAN applications," Microwave Opt. Technol. Lett., Vol. 52, 2648-2653, 2010.
doi:10.1002/mop.25561        Google Scholar

5. Su , C. M., H. T. Chen, and K. L.Wong, "Printed dual-band dipole antenna with U-slotted arms for 2.4/5.2 GHz WLAN operation," Electron. Lett., Vol. 38 , 1308-1309, 2002.
doi:10.1049/el:20020919        Google Scholar

6. Hwang , S. H., J. I. Moon, W. I. Kwak, and S. O. Park, "Printed compact dual band antenna for 2.4 and 5 GHz ISM band applications," Electron Lett., Vol. 40, 1568-1569, 2004.
doi:10.1049/el:20046579        Google Scholar

7. Fang, C. Y., S. W. Su, and K. L. Wong, "Narrow flat metal-plate antenna for dual-band WLAN operation," Microwave Opt. Technol. Lett., Vol. 38, 398-400, 2003.
doi:10.1002/mop.11072        Google Scholar

8. Su, S. W. and Y. T. Liu, "Compact paper-clip-shaped wire antenna for 2.4 and 5.2 GHz WLAN operation," Microwave Opt. Technol. Lett., Vol. 50, 2572-2574, 2008.
doi:10.1002/mop.23760        Google Scholar

9. Su, S. W. and Y. T. Liu, "A one-piece flat-plate dipole antenna for dual-band WLAN operation," Microwave Opt. Technol. Lett., Vol. 50, 678-680, 2008.
doi:10.1002/mop.23179        Google Scholar

10. Su , S. W., "Low-cost flat metal-plate dipole antenna for 2.4/5-GHz WLAN operation," Microwave Opt. Technol. Lett., Vol. 50, 1686-1687, 2008.
doi:10.1002/mop.23461        Google Scholar

11. Su, , S. W. and T. C. Hong, "A bent, short-circuited, metal-plate dipole antenna for 2.4-GHz WLAN operation," Progress In Electromagnetics Research Letters, Vol. 16, 191-197, 2010.
doi:10.2528/PIERL10062311        Google Scholar

12. I-PEX Co., Ltd, , http://www.i-pex.com/.        Google Scholar

13. Hirose Electric Co., Ltd, , http://www.hirose-connectors.com/.        Google Scholar

14. Ansoft Corporation HFSS, Pittsburgh, , PA, http://www.ansoft.com/products/hf/hfss.        Google Scholar

15. CTIA authorized test laboratory, CTIA, the wireless association, , http://www.ctia.org/business resources/certification/test labs/.        Google Scholar

16. Volakis , J. L., Antenna Engineering Handbook, 4th Ed., Chap. 6, 16{19, McGraw-Hill, New York, 2007.