volume | PIER Journals

2014-05-17

Low Cost Strip-to-Bilateral-Slotline Transition on Wide Slotline

Pengbo Zhang,

Mr. Pengbo Zhang

School of Automation & Electrical Engineering

Lanzhou Jiao Tong University

China

Homepage

Xiaoqiang Chen,

Dr. Xiaoqiang Chen

School of Automation & Electrical Engineering

Lanzhou Jiao Tong University

China

Homepage

Jun Ma

Dr. Jun Ma

School of Automation & Electrical Engineering

Lanzhou Jiao Tong University

China

Homepage

Progress In Electromagnetics Research Letters, Vol. 46, 67-72, 2014

doi:10.2528/PIERL14041609 | Google Scholar

Abstract

This paper presents a low-cost strip-to-bilateral-slotline transition with operating bandwidth from 0.53 to 6 GHz. The low-cost design concept is realized by utilizing conventional cheap FR-4 substrate and wide slotline with large slot width. By virtue of the low price of FR-4, less strict fabrication tolerance of wide slotline and the avoidance of metallic vias, the fabrication cost is reduced significantly compared to schemes using expensive Rogers RT laminates, extremely narrow slotline with strict fabrication tolerance and metallic vias. The broadband impedance matching difficulty caused by the high characteristic impedance of wide slotline is solved by three means. Firstly, bilateral structure is used to lower the characteristic impedance of the slotline. Then an elliptic slotline stub and an innovative half-elliptic strip stub are proposed to provide good impedance matching. Finally, multi-section stepped impedance transformers are used to match the transition from high impedance to standard 50 Ohm. The validity of the design methods is verified through experiments.

Download Full Article (747) View Full Article volume

Citation

Copy Export

Pengbo Zhang, Xiaoqiang Chen, and Jun Ma, "Low Cost Strip-to-Bilateral-Slotline Transition on Wide Slotline," Progress In Electromagnetics Research Letters, Vol. 46, 67-72, 2014.
doi:10.2528/PIERL14041609

References

1. Lin, F., Y. Qi, and Y. C. Jiao, "A 0.7-20-GHz strip-fed bilateral tapered slot antenna with low cross polarization," IEEE Antennas and Wireless Propagation Letters, Vol. 12, No. 1, 737-740, June 2013.
doi:10.1109/LAWP.2013.2270934 Google Scholar

2. Lin, F., Y. C. Jiao, and Y. Qi, "A wideband microstrip to bilateral slotline transition using constant impedance bilateral slotline and heart-shaped irregular cavity," IEEE Microwave and Components Letters, Vol. 23, No. 5, 255-257, April 2013.
doi:10.1109/LMWC.2013.2255123 Google Scholar

3. Wang, N.-B., Y.-C. Jiao, Y. Song, L. Zhang, and F.-S. Zhang, "A microstrip-fed logarithmically tapered slot antenna for wideband applications," Journal of Electromagnetic Waves and Applications, Vol. 23, No. 10, 1335-1344, 2009.
doi:10.1163/156939309789108543 Google Scholar

4. Wang, N.-B., Y. Song, Y.-C. Jiao, L. Zhang, and F.-S. Zhang, "Extreme wideband tapered slot antenna with impedance bandwidth in excess of 21.6 : 1," Journal of Electromagnetic Waves and Applications, Vol. 23, No. 2-3, 231-238, 2009.
doi:10.1163/156939309787604445 Google Scholar

5. Xu, H.-Y., H. Zhang, J. Wang, and L.-X. Ma, "A new tapered slot antenna with symmetrical and stable radiation pattern," Progress In Electromagnetics Research Letters, Vol. 5, 35-43, 2008.
doi:10.2528/PIERL08103003 Google Scholar

6. Yang, Y., Y. Wang, and A. E. Fathy, "Design of compact Vivaldi antenna arrays for UWB see through wall applications," Progress In Electromagnetics Research, Vol. 82, 401-418, 2008.
doi:10.2528/PIER08040601 Google Scholar

7. Ramakrishna, J., "Even-mode characteristics of the bilateral slotline," IEEE Transaction on Microwave Theory and Techniques, Vol. 38, No. 6, 760-765, June 1990.
doi:10.1109/22.130971 Google Scholar

8. Lin, F., Y. C. Jiao, and Z. Zhang, "Strip-fed tapered slot antenna with enhanced impedance bandwidth from 0.57-35 GHz," IET Electronics Letters, Vol. 49, No. 17, 1057-1058, August 2013.
doi:10.1049/el.2013.1920 Google Scholar