2014-06-17
Broadband Rectangular Waveguide to GCPW Transition
By
Progress In Electromagnetics Research Letters, Vol. 46, 107-112, 2014
Abstract
A broadband transition design between rectangular waveguide and GCPW is proposed and studied. The E-field of GCPW is designed to be gradually changed to that of waveguide via the simple tapered probes and metallic vias. The planar circuit of the transition is fabricated by low cost standard PCB process. The tolerance analysis for this transition is also given. A back-to-back transition prototype at Ka-band is fabricated and measured. The measurement results show that maximum insertion loss of 0.75 dB and return loss of better than 15 dB are obtained within a desired frequency range from 26.5 to 40 GHz. The measurement results agree well with simulation results, which validate the feasibility of this design.
Citation
Jun Dong, Tao Yang, Yu Liu, Ziqiang Yang, and Yi-Hong Zhou, "Broadband Rectangular Waveguide to GCPW Transition," Progress In Electromagnetics Research Letters, Vol. 46, 107-112, 2014.
doi:10.2528/PIERL14050907
References

1. Shigesawa, H., M. Tsjui, and A. A. Oliner, "Conductor-backed slot line and coplanar waveguide: Dangers and full-wave analyses," IEEE MTT-S Int. Microw. Symp. Dig., 199-202, 1988.        Google Scholar

2. Tien, C.-C., C.-K. C. Tzuang, S.-T. Peng, and C.-C. Chang, "Transmission characteristics of finite-width conductor-backed coplanar waveguide," IEEE Trans. Microw. Theory Tech., Vol. 41, No. 9, 1616-1623, 1993.
doi:10.1109/22.245687        Google Scholar

3. Lee, J. J., K.-C. Eun, D. Y. Jung, and C.-S. Park, "A novel GCPW to rectangular waveguide transition for 60 GHz applications," IEEE Microw. Wireless Compon. Lett., Vol. 19, No. 2, 80-82, 2009.
doi:10.1109/LMWC.2008.2011316        Google Scholar

4. Shih, Y.-C., "Broadband characterization of conductor-backed coplanar waveguide using accurate on-wafer measurement techniques," Microw. J., Vol. 34, No. 4, 95-105, 1991.        Google Scholar

5. Lin, S., S. Yang, A. E. Fathy, and A. Elsherbini, "Development of a novel UWB Vivaldi antenna array using SIW technology," Progress In Electromagnetics Research, Vol. 90, 369-384, 2009.
doi:10.2528/PIER09020503        Google Scholar

6. Hung, C.-F., A.-S. Liu, C.-H. Chien, C.-L. Wang, and R.-B. Wu, "Bandwidth enhancement on waveguide transition to conductor backed CPW with high dielectric constant substrate," IEEE Microw. Guided Wave Lett., Vol. 15, No. 2, 128-130, 2005.        Google Scholar

7. Vahidpour, M. and K. Sarabandi, "Ground coplanar waveguide to rectangular waveguide transition," IEEE Antennas and Propagation Society International Symposium, 2009 APSURSI, 1-5, 2009.
doi:10.1109/APS.2009.5172265        Google Scholar

8. Aliakbarian, H., S. Radiom, V. Tavakol, P. Reynaert, B. Nauwelaers, G. A. E. Vandenbosch, and G. Gielen, "Fully micromachined W-band rectangular waveguide to grounded coplanar waveguide transition," IET Microwaves, Antennas & Propagation, Vol. 6, No. 5, 533-540, 2012.
doi:10.1049/iet-map.2011.0301        Google Scholar

9. Flammia, I., A. Stohr, C. C. Leonhardt, J. Honecker, and A. G. Steffan, "71-76 GHz grounded CPW to WR-12 transition for quasi-hermetic RoF wireless transmitter," Electronics Letters, Vol. 48, No. 9, 506-508, 2012.
doi:10.1049/el.2012.0377        Google Scholar