2020-06-09
Design of a 3-D Tunable Band-Stop Frequency Selective Surface with Wide Tuning Range
By
Progress In Electromagnetics Research Letters, Vol. 92, 9-16, 2020
Abstract
In this paper, a three-dimensional (3-D) tunable band-stop frequency selective surface (FSS) with wide tuning range is presented. The proposed tunable 3-D FSS consists of a periodic array of an annular resonator loaded with two varactor diodes. By controlling the reverse voltage of the varactor diodes, the resonance frequency could be tuned in a wide frequency range. Full-wave simulation shows 100% tuning range from 3.0 GHz to 6.0 GHz with respect to lower resonance frequency. The simulated results exhibit stable band-stop performance under different incident angles (up to 45˚). By cascaded two 3-D tunable FSSs, the bandwidth and selectivity performance could be further enhanced. The proposed 3-D FSS with its stable stop-band performance can be a potential candidate to shield the RF signals which is the major source of problem leading to RF device malfunctions.
Citation
Shengli Jia, Bingzheng Xu, and Ting Zheng, "Design of a 3-D Tunable Band-Stop Frequency Selective Surface with Wide Tuning Range," Progress In Electromagnetics Research Letters, Vol. 92, 9-16, 2020.
doi:10.2528/PIERL20041902
References

1. Munk, B. A., Frequency Selective Surfaces: Theory and Design, Wiley, New York, USA, 2000.
doi:10.1002/0471723770

2. Yu, Y. M., C. N. Chiu, Y. P. Chiou, and T. L. Wu, "An effective via-based frequency adjustment and minimization methodology for single-layered frequency-selective surfaces," IEEE Transactions on Antennas and Propagation, Vol. 63, No. 4, 1061-1049, 2015.
doi:10.1109/TAP.2015.2398123        Google Scholar

3. Liu, N., X. J. Sheng, and J. J. Fan, "A compact miniaturized frequency selective surface with stable resonant frequency," Progress in Electromagnetic Research Letters, Vol. 62, 17-22, 2016.
doi:10.2528/PIERL16070608        Google Scholar

4. Mias, C. and J. H. Yap, "A varactor-tunable high impedance surface with a resistive-lumped-element biasing grid," IEEE Trans. Antennas Propag., Vol. 55, No. 7, 1955-1962, 2007.
doi:10.1109/TAP.2007.900228        Google Scholar

5. Vez, F. J. L., J. Rodriguez-Cuevas, A. E. Martynyuk, and J. I. Martinez-Lopez, "Active frequency selective surfaces based on loaded ring patches," 2018 IEEE International Conference on Computational Electromagnetics, 1-2, 2018.        Google Scholar

6. Sivasamy, R., B. Moorthy, and M. Kanagasabai, "A wideband frequency tunable FSS for electromagnetic shielding applications," IEEE Trans. on Electromagnetic Compatibility, Vol. 60, 280-283, 2018.
doi:10.1109/TEMC.2017.2702572        Google Scholar

7. Withayachumnankul, W., C. Fumeaux, and D. Abbott, "Planar array of electric-LC resonators with broadband tunability," Antennas and Wireless Propagation Letters, Vol. 10, 557-580, 2011.        Google Scholar

8. Neto, A. G., J. C. e Silva, A. G. Barboza, D. F. Mamedes, I. B. G. Coutinho, and M. de Oliveira Alencar, "Varactor-tunable four arms star bandstop FSS with a very simple bias circuit," 2019 13th European Conference on Antennas and Propagation (EuCAP), 1-5, 2019.        Google Scholar

9. Mamedes, D. F., A. Gomes Neto, J. C. e Silva, and J. Bornemann, "Design of reconfigurable frequency-selective surfaces including the PIN diode threshold region," IET Microwaves, Antennas and Propagation, Vol. 12, No. 9, 1483-1486, 2018.
doi:10.1049/iet-map.2017.0761        Google Scholar

10. Azemi, S. N., K. Ghorbani, and W. S. T. Rowe, "A reconfigurable FSS using a spring resonator element," IEEE Antennas Wireless Propag. Lett, Vol. 12, 781-784, 2013.
doi:10.1109/LAWP.2013.2270950        Google Scholar

11. Rafique, U. and S. Agarwal, "A modified frequency selective surface band-stop filter for ultra-wideband applications," 2018 International Conference on Advances in Computing, Communications and Informatics (ICACCI), 1653-1656, 2018.
doi:10.1109/ICACCI.2018.8554690        Google Scholar

12. Tao, K., B. Li, Y. M. Tang, M. Zhang, and Y. M. Bo, "Analysis and implementation of 3D bandpass frequency selective structure with high frequency selectivity," Electronics Letters, Vol. 53, No. 5, 324-326, 2017.
doi:10.1049/el.2016.4469        Google Scholar

13. Azemi, R. S. N. and W. S. T. Rowe, "Development and analysis of 3D frequency selective surfaces," IEEE Asia-Pacific Microwave Conference Proceedings (APMC), 2011.        Google Scholar

14. Azemi, S. N., K. Ghorbani, and W. S. T. Rowe, "3D frequency selective surfaces," IEEE Antennas and Propagation Conference, 2012.        Google Scholar

15. Omar, A. A. and Z. Shen, "Multiband high-order bandstop 3-D frequency-selective structures," IEEE Transactions on Antennas and Propagation, Vol. 64, No. 6, 2217-2226, 2016.
doi:10.1109/TAP.2016.2546967        Google Scholar

16. Li, B. and Z. Shen, "Three-dimensional bandpass frequency-selective structure with multiple transmission zeros ," IEEE Trans. Microw. Theory Tech, Vol. 61, No. 10, 3578-3589, 2013.
doi:10.1109/TMTT.2013.2279776        Google Scholar

17. Kanth, V. K. and S. Raghavan, "3D frequency selective surfaces based on substrate integrated waveguide technology," 2018 IEEE MTT-S International Microwave and RF Conference (IMaRC), 2018.        Google Scholar

18. Yu, W., G. Q. Luo, Y. Yu, Z. Liao, H. Jin, and Z. Shen, "Broadband band-absorptive frequency-selective rasorber with a hybrid 2-D and 3-D structure," IEEE Antennas and Wireless Propagation Letters, Vol. 8, No. 18, 1701-1705, 2019.
doi:10.1109/LAWP.2019.2928362        Google Scholar