volume | PIER Journals

2010-02-15

Crosstalk Reduction Using Step Shaped Transmission Line

Ali Reza Mallahzadeh,

Dr. Ali Reza Mallahzadeh

Iran University of Science and Technology

Iran

Homepage

Amir Ghasemi,

Dr. Amir Ghasemi

Faculty of Engineering

Shahed University

Iran

Homepage

S. Akhlaghi,

Dr. S. Akhlaghi

Faculty of Engineering

Shahed University

Iran

Homepage

Bahman Rahmati,

Dr. Bahman Rahmati

Department of Electrical & Electronic Engineering

Shahed University

Iran

Homepage

Reza Bayderkhani

Dr. Reza Bayderkhani

Electrical & Electronic Eng. Department

Tarbiat Modares University

Iran

Homepage

Progress In Electromagnetics Research C, Vol. 12, 139-148, 2010

doi:10.2528/PIERC09121606 | Google Scholar

Abstract

In this paper a novel method for crosstalk reduction is proposed. This is achieved through using the step shaped transmission line, which basically attempts to create steps along the transmission lines to decrease the crosstalk, while having negligible variation in return loss. To this end, various simulations are carried out to get an intuition regarding the underlying processes conducted to the far-end crosstalk, thereby enabling to optimize the far-end crosstalk, and simultaneously to yield a small variation in the return loss. Accordingly, a conventional coupled transmission line is employed as a benchmark, enabling to have an idea regarding the impact of the proposed method in terms of the ability to decrease the far-end cross talk. Furthermore, the proposed transmission line and the benchmark structure are fabricated and then evaluated to verify the experimental results to that of the simulation. In addition, comprehensive parametric studies have been carried out to get insight on the effect of various adjustable parameters over the crosstalk. The obtained results show that the crosstalk is decreased more than 4 dB over the entire operating bandwidth. Some advantages such as ease of design and fabrication have made the proposed technique an advisable method when dealing with low crosstalk.

Download Full Article (412) View Full Article volume

Citation

Copy Export

Ali Reza Mallahzadeh, Amir Ghasemi, S. Akhlaghi, Bahman Rahmati, and Reza Bayderkhani, "Crosstalk Reduction Using Step Shaped Transmission Line," Progress In Electromagnetics Research C, Vol. 12, 139-148, 2010.
doi:10.2528/PIERC09121606

References

1. Gazizov, T. R., "Far-end crosstalk reduction in double-layered dielectric interconnects," IEEE Trans. Electromagnetic Compatibility, Vol. 43, No. 4, 566-572, Nov. 2001.
doi:10.1109/15.974636 Google Scholar

2. Kami, Y. and R. Sato, "Analysis of radiation characteristics of a finite-length transmission line using a circuit-concept approach," IEEE Trans. Electromagnetic Compatibility, Vol. 30, 114-121, May 1988.
doi:10.1109/15.2396 Google Scholar

3. Kami, Y. and R. Sato, "Crosstalk of finite length transmission lines in arbitrary directions on the same ground," Proc. 1992 IEEE Int. Symp. Electromagn. Compat., 247-250, Aug. 1992. Google Scholar

4. Ponchak, G. E., D. Chun, J. Yook, and L. P. B. Katehi, "Experimental verification of the use of metal filled via hole fences for crosstalk control of microstrip lines in LTCC packages," IEEE Trans. Advanced Packing, Vol. 24, No. 1, Feb. 2001. Google Scholar

5. You, H. and M. Soma, "Measurement and simulation of crosstalk reduction by discrete discontinuities along coupled PCB traces," IEEE Trans. Instrumentation and Measurement, Vol. 43, No. 2, 170-175, Apr. 1994.
doi:10.1109/19.293415 Google Scholar

6. Marshall, J. B., "Flat cable aids transfer of data," Electron., Vol. 4, 89-94, 1973. Google Scholar

7. Krage, M. K. and G. I. Haddad, "Characteristics of coupled microstrip lines II: Evaluation of coupled-line parameters," IEEE Trans. Microwave Theory Tech., Vol. 18, 222-228, Apr. 1970.
doi:10.1109/TMTT.1970.1127193 Google Scholar

8. Gilb, J. P. and C. A. Balanis, "Pulse distortion on multilayer coupled microstrip lines," IEEE Trans. Microwave Theory Tech., Vol. 37, 1620-1627, Oct. 1987. Google Scholar

9. Paul, C. R., Analysis of Multi Conductor Transmission Lines, Wiley-Inter Sciences, 1994.

10. Li, S., Y. Liu, Z. Song, and H. Hu, "Analysis of crosstalk of coupled transmission lines by inserting additional traces grounded with vias on printed circuit boards," Asia-Pacific Conferenceon Environmental Electromagnetics, 451-454, Nov. 2003. Google Scholar

11. Kim, J., W. Ni, and E. C. Kan, "Crosstalk reduction with nonlinear transmission lines for high-speed VLSI system," IEEE Custom Integrated Circuits Conference, 869-872, Sep. 10-13, 2006. Google Scholar

12. Mbairi, F. D., W. P. Siebert, and H. Hesselbom, "High-frequency transmission lines crosstalk reduction using spacing rules," IEEE Transactions on Components and Packaging Technologies, Vol. 31, No. 3, 601-610, Sep. 2008.
doi:10.1109/TCAPT.2008.2001163 Google Scholar

13. Lee, K., H.-B. Lee, H.-K. Jung, J.-Y. Sim, and H.-J. Park, "Serpentine guard trace to reduce far-end crosstalk and even-odd mode velocity mismatch of microstrip lines by more than 40%," Proceedings 57th Electronic Components and Technology Conference, 329-332, May 29-Jun. 1, 2007. Google Scholar