volume | PIER Journals

Abstract

This article reports a single layer tri-band bandpass, polarization insensitive Frequency Selective Surface (FSS). The unit cell is designed by considering different square loop elements and cross dipole element to pass Wi-Max and WLAN frequency range with low loss. Three different shapes of loops and one cross dipole are arranged in a way that gives a triple-band-pass characteristic from the proposed structure. These loops and dipole are designed to pass Wi-MAX (2.5-2.7 GHz, 3.4-3.6 GHz) and WLAN (center frequency, 5.5 GHz) bands. The structure performance is independent of incidence angle of wave due to its symmetrical geometry which makes the design polarization insensitive and achieves good angular stability. A 14x14 array of proposed unit cell is realized and measured. The proposed FSS achieves a 3 dB transmission bandwidth of 25% at 2.6 GHz, 65.6% at 3.5 GHz and 65.6% at 5.5 GHz. The advantage of the proposed design is that it has a simple and compact geometry fabricated on a low-cost substrate and achieved tri-band band pass response with a wide angular stability.

1. Kushwaha, N., R. Kumar, R. Ram Krishna, and T. Oli, "Design and analysis of new compact UWB frequency selective surface and its equivalent circuit," Progress In Electromagnetic Research C, Vol. 46, 31-39, 2014.
doi:10.2528/PIERC13100908 Google Scholar

2. Munk, B. A., Frequency Selective Surfaces: Theory and Design, Wiley-Interscience, New York, 2000.
doi:10.1002/0471723770

3. Wu, T. K., Frequency Selective Surface and Grid Array, A Wiley Interscience Publication, 1995.

4. Zhou, H., S. Qu, Z. Xu, J. Wang, H. Ma, W. Peng, B. Lin, and P. Bai, "A triband second-order frequency selective surface," IEEE Antennas and Wireless Propagation Letters, Vol. 10, 507-509, 2011, doi: 10.1109/LAWP.2011.2157074.
doi:10.1109/LAWP.2011.2157074 Google Scholar

5. Yadav, S., C. P. Jain, and M. M. Sharma, "Polarization independent dual-bandpass frequency selective surface for Wi-Max applications," Int. J. RF Microw. Comput. Aided Eng., Vol. 28, No. 6, e21278, August 2018, doi.org/10.1002/mmce.21278. Google Scholar

6. Mahaveer, U., K. T. Chandrasekaran, M. P. Mohan, A. Alphones, M. Y. Siyal, and M. F. Karim, "A tri-band frequency-selective surface," Journal of Electromagnetic Waves and Applications, Vol. 35, No. 7, 861-873, 2021, doi: 10.1080/09205071.2020.1865206.
doi:10.1080/09205071.2020.1865206 Google Scholar

7. Chen, H.-Y. and Y. Tao, "Bandwidth enhancement of a U-slot patch antenna using dual-band frequency-selective surface with double rectangular ring elements," Microw. Opt. Technol. Lett., Vol. 53, No. 7, 1547-1553, 2011, doi: 10.1002/mop.26066.
doi:10.1002/mop.26066 Google Scholar

8. Ditti, S. K. and S. Das, "On a polarization-independent frequency-selective surface (FSS)," Microw. Opt. Technol. Lett., Vol. 44, 249-250, 2005, doi: 10.1002/mop.20601.
doi:10.1002/mop.20601 Google Scholar

9. Ramaccia, D., A. Toscano, A. Colasante, G. Bellaveglia, and R. Lo Forti, "Inductive tri-band double element FSS for space applications," Progress In Electromagnetics Research C, Vol. 18, 87-101, 2011.
doi:10.2528/PIERC10100503 Google Scholar

10. Sivasamy, R. and M. Kanagasabai, "A novel dual-band angular independent FSS with closely spaced frequency response," IEEE Microwave and Wireless Components Letters, Vol. 25, No. 5, 298-300, 2015, doi: 10.1109/LMWC.2015.2410591.
doi:10.1109/LMWC.2015.2410591 Google Scholar

11. Lu, Z. H., P. G. Liu, and X. J. Huang, "A novel three-dimensional frequency selective structure," IEEE Antennas and Wireless Propagation Letters, Vol. 11, 588-591, 2012, doi: 10.1109/LAWP.2012.2201438. Google Scholar

12. Qing, A. and C. K. Lee, Differential Evolution in Electromagnetic, Springer-Verlag, Heidelberg, Berlin, 2010.
doi:10.1007/978-3-642-12869-1

13. Islam, S., J. Stiens, G. Poesen, I. Jaeger, W. De Raedt, and R. Vounckx, "Heuristic approach of finite grounded frequency selective surface arrays characterization in W-band," Proceedings Symposium IEEE/LEOS Benelux Chapter, Twente, 2008. Google Scholar

14. Narayan, S., B. Sangeetha, and R. M. Jha, Frequency Selective Surfaces Based High Performance Microstrip Antenna, Springer, Singapore, 2016.
doi:10.1007/978-981-287-775-8

15. Yadav, S., C. P. Jain, and M. M. Sharma, "Smartphone frequency shielding with penta-bandstop FSS for security and electromagnetic health applications," IEEE Transactions on Electromagnetic Compatibility,, Vol. 61, No. 3, 887-892, June 2019, doi: 10.1109/TEMC.2018.2839707.
doi:10.1109/TEMC.2018.2839707 Google Scholar

16. Ibrahimi, A., S. Nirantar, W. Withayachumnankul, M. Bhaskaran, S. Sriram, S. F. Al-Sarawi, and D. Abbott, "Second-order tetrahertz band pass frequency selective surface with miniaturized elements," IEEE Transaction on Tetrahertz Science and Technology, Vol. 5, 2015, doi: 10.1109/TTHZ.2015.2452813. Google Scholar

17. Yadav, S., B. Peswani, R. Choudhury, and M. M. Sharma, "Miniaturized band pass double-layered frequency selective superstrate for Wi-Max applications," 2014 IEEE Symposium on Wireless Technology and Applications (ISWTA), 182-187, 2014, doi: 10.1109/ISWTA.2014.6981183.
doi:10.1109/ISWTA.2014.6981183 Google Scholar

18. Katoch, K., N. Jaglan, and S. D. Gupta, "Design of a triple band notched compact FSS at UWB. frequency range," Progress In Electromagnetic Research M, Vol. 87, 147-157, 2019.
doi:10.2528/PIERM19091103 Google Scholar

19. Lee, I.-G., Y. B. Park, H.-J. Chun, Y.-J. Kim, and I.-P. Hong, "Design of active frequency selective surface with curved composite structures and tunable frequency response," International Journal of Antennas and Propagation, Vol. 2017, Article ID 6307528, 1-10, doi: 10.1155/2017/6307528. Google Scholar

20. Huang, C., C. Ji, X.Wu, J. Song, and X. Luo, "Combining FSS and EBG surfaces for high-efficiency transmission and low-scattering properties," IEEE Transactions on Antennas and Propagation, Vol. 66, No. 3, 1628-1632, March 2018, doi: 10.1109/TAP.2018.2790430.
doi:10.1109/TAP.2018.2790430 Google Scholar

21. Annam, K., S. Kumar Khah, S. Dooley, C. Cerny, and G. Subramanyam, "Experimental design of bandstop filters based on unconventional defected ground structures," Microw. Opt. Technol. Lett., Vol. 58, 2969-2973, 2016, doi: 10.1002/mop.30192.
doi:10.1002/mop.30192 Google Scholar

Prof. Sanjeev Yadav

Dr. Mahendra Mohan Sharma

Dr. Rajesh Singh