volume | PIER Journals

Abstract

In this study, a star-wheel design of single crystal sapphire optical fiber is proposed to achieve single mode operation in the infrared regime. In the azimuthal direction the structure retains a reduced core of higher refractive index. It is connected to the outer boundary viastar-wheel configuration of segments. The region of alternating symmetrical truncated cavities of lower refractive index is air. The enclosed alternating layers of sapphire and air cavities around the reduced core function as cladding. Fiber structure in the azimuthal directionis uniformly distributed in the radial direction. Finite element method is employed to analyze the modal characteristics of fundamental and higher order modes. Under strongly guided approximation, the structure can effectively eliminate the large modal interference. The proposed waveguides, at operating wavelength of ~1.55 µm, with the diameter of ~50 µm, 75 µm, 100 µm, and 125 µm diameter, exhibit confinement loss of ~0.0314 dB/m, 0.0072 dB/m, 0.0023 dB/m, and 0.0009 dB/m, respectively. It is anticipated that such fiber can be a potential candidate in addressing a wide range of optical sensors and communication systems, which unable to sustain in extremely harsh environments. COMSOL multi-physics ® is used to perform numerical investigations.

1. Mumtaz, F., M. A. Ashraf, Y. Dai, and W. Hu, "Numerical solution of strongly guided modes propagating in sapphire crystal fibers (α-Al₂O₃) for UV, VIS/IR wave-guiding," Results in Physics, Vol. 18, 103311, Sep. 2020.
doi:10.1016/j.rinp.2020.103311 Google Scholar

2. Katyba, G. M., K. I. Zaytsev, I. N. Dolganova, I. A. Shikunova, N. V. Chernomyrdin, S. O. Yurchenko, G. A. Komandin, I. V. Reshetov, V. V. Nesvizhevsky, and V. N. Kurlov, "Sapphire shaped crystals for waveguiding, sensing and exposure applications," Progress in Crystal Growth and Characterization of Materials, Vol. 64, No. 4, 133-151, Dec. 2018.
doi:10.1016/j.pcrysgrow.2018.10.002 Google Scholar

3. Chen, H., K. Liu, Y. Ma, F. Tian, and H. Du, "Nanostructured sapphire optical fiber for sensing in harsh environments," Micro-and Nanotechnology Sensors, Systems, and Applications IX, Vol. 10194, 101941P, International Society for Optics and Photonics, May 18, 2017. Google Scholar

4. Bera, S., B. Liu, J. Wuenschell, J. Baltrus, D. Lau, B. Howard, M. Buric, B. Chorpening, and P. Ohodnicki, "Fabrication and evaluation of sapphire fiber cladding via magnesium aluminate spinel sol-gel based approaches," Fiber Optic Sensors and Applications XVI, Vol. 11000, 110000J, International Society for Optics and Photonics, May 14, 2019. Google Scholar

5. Buric, M., B. Liu, J. Thapa, and B. Chorpening, "Single-crystal fiber structures for harsh environment applications (Rising Researcher Presentation)," Fiber Optic Sensors and Applications XV, Vol. 10654, 106540N, International Society for Optics and Photonics, May 14, 2018. Google Scholar

6. Ohanian, III, O. J., A. J. Boulanger, S. D. Rountree, J. T. Jones, A. Birri, and T. E. Blue, "Single-mode sapphire fiber optic distributed sensing for extreme environments," Micro-and Nanotechnology Sensors, Systems, and Applications XI, Vol. 10982, 109822N, International Society for Optics and Photonics, May 13, 2019. Google Scholar

7. Pfeiffenberger, N., G. Pickrell, K. Kokal, and A. Wang, "Sapphire photonic crystal fibers," Optical Engineering, Vol. 49, No. 9, 090501, Sep. 2010.
doi:10.1117/1.3483908 Google Scholar

8. Wang, T., J. Zhang, N. Zhang, S. Wang, B. Wu, N. Lin, P. Kusalik, Z. Jia, and X. Tao, "Single crystal fibers: Diversified functional crystal material," Advanced Fiber Materials, 1-25, 2019. Google Scholar

9. Spratt, W., M. Huang, T. Murray, and H. Xia, "Optical mode confinement and selection in single-crystal sapphire fibers by formation of nanometer scale cavities with hydrogen ion implantation," Journal of Applied Physics, Vol. 114, No. 20, 203501, Nov. 2, 2013.
doi:10.1063/1.4833240 Google Scholar

10. Shen, Y., L. Tong, and S. Chen, "Performance stability of the sapphire fiber and cladding under high temperature," Harsh Environment Sensors II, Vol. 3852, 134-142, International Society for Optics and Photonics, Dec. 8, 1999. Google Scholar

11. Wilson, B. A., C. M. Petrie, and T. E. Blue, "High-temperature effects on the light transmission through sapphire optical fiber," Journal of the American Ceramic Society, Vol. 101, No. 8, 3452-3459, Aug. 2018.
doi:10.1111/jace.15515 Google Scholar

12. Chen, H., M. Buric, P. R. Ohodnicki, J. Nakano, B. Liu, and B. T. Chorpening, "Review and perspective: Sapphire optical fiber cladding development for harsh environment sensing," Applied Physics Reviews, Vol. 5, No. 1, 011102, Mar. 2018.
doi:10.1063/1.5010184 Google Scholar

13. Zhu, Y., Z. Huang, F. Shen, and A. Wang, "Sapphire-fiber-based white-light interferometric sensor for high-temperature measurements," Optics Letters, Vol. 30, No. 7, 711, 2005.
doi:10.1364/OL.30.000711 Google Scholar

14. Wang, S.-C., C.-Y. Hsu, T.-T. Yang, D.-Y. Jheng, T.-I. Yang, T.-S. Ho, and S.-L. Huang, "Laser-diode pumped glass-clad Ti:sapphire crystal fiber laser," Optics Letters, Vol. 41, No. 14, 3217, 2016.
doi:10.1364/OL.41.003217 Google Scholar

15. Djeu, N., , http://www.micromaterialsinc.com for pioneer commercial sapphire fiber provider.

16. Katyba, G. M., N. V. Chernomyrdin, I. N. Dolganova, A. A. Pronin, I. V. Minin, O. V. Minin, K. I. Zaytsev, and V. N. Kurlov, "Step-index sapphire fiber and its application in a terahertz near-field microscopy," Proc. SPIE 11164, Millimetre Wave and Terahertz Sensors and Technology XII, 111640G, Oct. 18, 2019. Google Scholar

17. Katyba, G. M., K. I. Zaytsev, N. V. Chernomyrdin, I. A. Shikunova, G. A. Komandin, V. B. Anzin, and M. Skorobogatiy, "Sapphire photonic crystal waveguides for terahertz sensing in aggressive environments," Advanced Optical Materials, 1800573, 2018.
doi:10.1002/adom.201800573 Google Scholar

18. Nubling, R. K. and J. A. Harrington, "Optical properties of single-crystal sapphire fibers," Applied Optics, Vol. 36, No. 24, 5934-5940, Aug. 20, 1997.
doi:10.1364/AO.36.005934 Google Scholar

19. Hill, C., D. Homa, Z. Yu, Y. Cheng, B. Liu, A. Wang, and G. Pickrell, "Single mode air-clad single crystal sapphire optical fiber," Applied Sciences, Vol. 7, No. 5, 473, May 2017.
doi:10.3390/app7050473 Google Scholar

20. Cheng, Y., C. Hill, B. Liu, Z. Yu, H. Xuan, D. Homa, A. Wang, and G. Pickrell, "Design and analysis oflarge-core single-mode windmill single crystal sapphire optical fiber," Optical Engineering, Vol. 55, No. 6, 066101, Jun. 1, 2016.
doi:10.1117/1.OE.55.6.066101 Google Scholar

21. Cheng, Y., C. Hill, B. Liu, Z. Yu, H. Xuan, D. Homa, A. Wang, and G. Pickrell, "Modal reduction in single crystal sapphire optical fiber," Optical Engineering, Vol. 54, No. 10, 107103, Oct. 2015.
doi:10.1117/1.OE.54.10.107103 Google Scholar

22. Rastogi, V. and K. S. Chiang, "Analysis of segmented-cladding fiber by the radial-effective-index method," JOSA B, Vol. 21, No. 2, 258-265, Feb. 1, 2004.
doi:10.1364/JOSAB.21.000258 Google Scholar

23. LaBelle, Jr., H. E., "EFG, the invention and application to sapphire growth," Journal of Crystal Growth, Vol. 50, No. 1, 8-17, Sep. 1, 1980.
doi:10.1016/0022-0248(80)90226-2 Google Scholar

24. Mesa, M. C., P. B. Oliete, V. M. Orera, J. Y. Pastor, A. Martın, and J. Llorca, "Microstructure and mechanical properties of Al₂O₃/Er₃Al₅O₁₂ eutectic rods grown by the laser-heated floating zone method," Journal of the European Ceramic Society, Vol. 31, No. 7, 1241-1250, Jun. 1, 2011.
doi:10.1016/j.jeurceramsoc.2010.05.004 Google Scholar

25. Andreeta, E. R., M. R. Andreeta, and A. C. Hernandes, "Laser heated pedestal growth of Al₂O₃/GdAlO₃ eutectic fibers," Journal of Crystal Growth, Vol. 234, No. 4, 782-785, Feb. 1, 2002.
doi:10.1016/S0022-0248(01)01764-X Google Scholar

26. Yoshikawa, A. and V. Chani, "Growth of optical crystals by the micro-pulling-down method," MRS Bulletin, Vol. 34, No. 4, 266-270, Apr. 2009.
doi:10.1557/mrs2009.77 Google Scholar

27. Cherin, A. H., An Introduction to Optical Fiber, McGraw-Hill Inc, 1987.

28. Jia, C., N. Wang, K. Li, and H. Jia, "Dual-cladding high birefringence photonic crystal fiber with elliptical-core," Applied Physics B, Vol. 125, No. 9, 158, Sep. 2019.
doi:10.1007/s00340-019-7273-1 Google Scholar

29. Burman, E., D. Elfverson, P. Hansbo, M. G. Larson, and K. Larsson, "Shape optimization using the cut finite element method," Comput. Methods Appl. Mech. Engrg., Vol. 328, 242-261, 2017. Google Scholar

30. Hossain, M. B., A. A. Bulbul, M. A. Mukit, and E. Podder, "Analysis of optical properties for square, circular and hexagonal photonic crystal fiber," Optics and Photonics Journal, Vol. 7, No. 11, 235-243, Nov. 2017.
doi:10.4236/opj.2017.711021 Google Scholar

31. Biswas, S. K., M. I. Hasan, M. A. Awsaf, M. N. Rahman, M. I. Abdullah, and M. M. Mia, "Design and analysis of hexagonal photonic crystal fiber with ultra-high birefringent and large negative dispersion coefficient for the application of sensing and broadband dispersion compensating fiber," Asian Journal of Applied Science and Technology (AJAST), Vol. 1, No. 8, 147-151, Sep. 2017. Google Scholar

32. Begum, F. and P. E. Abas, "Near infrared supercontinuum generation in silica based photonic crystal fiber," Progress In Electromagnetics Research C, Vol. 89, 149-159, 2019.
doi:10.2528/PIERC18100102 Google Scholar

33. Millo, A., I. Naeh, Y. Lavi, and A. Katzir, "Silver-halide segmented cladding fibers for the middle infrared," Applied Physics Letters, Vol. 88, No. 25, 251101, 2006.
doi:10.1063/1.2213958 Google Scholar

34. Dutta, A., "Mode analysis of different step index optical fibers at 1064 nm for high power fiber laser and amplifier," OSF Preprints, Oct. 18, 2019. Google Scholar

Dr. Farhan Mumtaz

Professor Yutang Dai

Dr. Muhammad Aqueel Ashraf

Dr. Wenbin Hu