volume | PIER Journals

Abstract

In order to study the information of temperature with stir during microwave heating on fluid, the coupled Maxwell's equations, fluid field equations and heat transport equations were solved using Finite-Element Method (FEM). The microwave heating on fluid was analysed with high power, different dynamic viscosities and relative complex permittivities. The results show that the highest temperature occurs on the interface of the fluid and air. When the fluid is heated under high microwave power, speeding up the stir can improve the uniform of temperature, but if the rotate speed is fast enough, going on speeding up the stir cannot decrease the temperature difference any more. When the value of the imaginary part of relative complex permittivity which accounts for dielectric losses or the dynamic viscosity increases, the temperature in the water rises very quickly, and the temperature difference is very large even if the rotate speed is fast enough.

1. Tavakoli, M. H., H. Karbaschi, and F. Samavat, "Computational modeling of induction heating process," Progress In Electromagnetics Research Letters, Vol. 11, 93-102, 2009.
doi:10.2528/PIERL09071509 Google Scholar

2. Li, W., M. A. Ebadian, T. L. White, and R. G. Grubb, "Heat transfer within a concrete slab applying the microwave decontamination process ," ASME J. Heat Transfer, Vol. 115, 42-50, 1993.
doi:10.1115/1.2910667 Google Scholar

3. Clemens, J. and C. Saltiel, "Numerical modeling of materials processing in microwave furnaces," Heat Mass Transfer, Vol. 39, No. 8, 1665-1675, 1996.
doi:10.1016/0017-9310(95)00255-3 Google Scholar

4. Dibben, D. C. and A. C. Metaxas, "Frequency domain vs. time domain finite element methods for calculation of fields in multimode cavities," IEEE Trans. Magn., Vol. 33, No. 2, 1468-1471, 1997.
doi:10.1109/20.582537 Google Scholar

5. Zhao, H. and I. W. Turner, "The use of a coupled computational model for studying the microwave heating of wood," Appl. Math. Modeling, Vol. 24, 183-197, 2000.
doi:10.1016/S0307-904X(99)00034-7 Google Scholar

6. Bows, J. R., M. L. Patrick, R. Janes, A. C. Metaxas, et al. "Microwave phase control heating," Food Sci. Technol., Vol. 34, 295-304, 1999. Google Scholar

7. Zhao, H., I. W. Turner, and G. Torgovnikov, "An experimental and numerical investigation of the microwave heating of wood," Microwave Power Electromagn. Energy, Vol. 33, 121-133, 1998. Google Scholar

8. Watanuki, J., Fundamental study of microwave heating with rectangular wave guide, M.S. Thesis, Nagaoka University of Technology, Japan, 1998 (in Japanese).

9. Ratanadecho, P., K. Aoki, and M. Akahori, "A numerical and experimental investigation of the modelling of microwave melting of frozen packed beds using a rectangular wave guide," Int. Comm. Heat Mass Transfer, Vol. 28, 751-762, 2001.
doi:10.1016/S0735-1933(01)00279-2 Google Scholar

10. Huang, K. M., Z. Lin, and X. Q. Yang, "Numerical simulation of microwave heating on chemical reaction in dilute solution," Progress In Electromagnetics Research, Vol. 49, 273-289, 2004.
doi:10.2528/PIER04042803 Google Scholar

11. Yang, X. Q. and K. M. Huang, "Study on the special effect of calcium sulfate crystallization under the irradiation of microwave," Journal of Inorganic Materials, Vol. 21, No. 2, 363-368, 2006. Google Scholar

12. Baker-Jarvis, J. and R. Inguva, "Dielectric heating of oilshales by monopoles and modified coaxial applicators," Journal of Microwave Power and Electromagnetic Energy, Vol. 23, No. 3, 160-170, 1984. Google Scholar

13. Mingos, D. M. P. and D. R. Baghurst, "Applications of microwave dielectric heating effects to synthetic problems in chemistry," Chemical Society Reviews, Vol. 20, No. 1, 1-47, 1991.
doi:10.1039/cs9912000001 Google Scholar

14. Torres, F. and B. Jecko, "Complete FDTD analysis of microwave heating processes in frequency-dependent and temperature-dependent media," IEEE Microwave Theory and Techniques, Vol. 45, No. 1, 108-117, 1997.
doi:10.1109/22.552039 Google Scholar

Dr. Jian Yan

Professor Xiaoqing Yang

Professor Kama Huang