1. Woolmer, T. J. and M. D. McCulloch, "Axial flux permanent magnet machines: A new topology for high performance applications," Hybrid Vehicle Conference, IET The Institution of Engineering and Technology, 27-42, 2006.
2. Mahmoudi, A., N. A. Rahim, and H. W. Ping, "Axial-flux permanent-magnet motor design for electric vehicle direct drive using sizing equation and finite element analysis," Progress In Electromagnetics Research, Vol. 122, 467-496, 2012.
doi:10.2528/PIER11090402
3. Gulec, M. and M. Aydin, "Influence of magnet grouping in reduction of cogging torque for a slotted double-rotor axial-flux PM motor," International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 812-817, 2012.
doi:10.1109/SPEEDAM.2012.6264415
4. Gieras, J. F. and M. Wing, Permanent Magnet Motor Technology: Design and Applications, 3rd Ed., CRC Press, 2010.
5. Aydin, M., Z. Q. Zhu, T. A. Lipo, and D. Howe, "Minimization of cogging torque in axial-flux permanent-magnet machines: Design concepts," IEEE Transactions on Magnetics, Vol. 43, No. 9, 3614-3622, Sep. 2007.
doi:10.1109/TMAG.2007.902818
6. Bianchini, C., F. Immovilli, A. Bellini, and M. Davoli, "Review of design solutions for internal permanent-magnet machines cogging torque reduction," IEEE Transactions on Magnetics, Vol. 48, No. 10, 2685-2693, 2012.
doi:10.1109/TMAG.2012.2199509
7. Kudrjavtsev, O. and A. Kilk, "Cogging torque reduction methods," IEEE Electric Power Quality and Supply Reliability Conference, 251-254, 2014, ISBN 978-1-4799-5020-1.
8. Aydin, M., "Magnet skew in cogging torque minimization of axial gap permanent magnet motors," Proceedings of the International Conference on Electrical Machines, 1-6, 2008.
9. Chabchoub, M., I. Ben Salah, G. Krebs, R. Neji, and C. Marchand, "PMSM cogging torque reduction: Comparison between different shapes of magnet," First International Conference on Renewable Energies and Vehicular Tecnology, 206-211, 2012.
10. Parviainen, A., "Design of axial-flux permanent-magnet low-speed machines and performance comparison between radial-flux and axial-flux machines,", Doctoral Thesis, Lappeenranta, Finland, Apr. 19, 2005.
11. Parviainen, A., M. Niemelä, and J. Pyrhönen, "Modeling of axial flux permanent-magnet machines," IEEE Transactions on Industry Applications, Vol. 40, No. 5, 1333-1340, 2004.
doi:10.1109/TIA.2004.834086
12. Fei, W. and P. C. K. Luk, "Cogging torque reduction techniques for axial-flux surface-mounted permanent-magnet segmented-armature-torus machines," IEEE International Symposium on Industrial Electronics, 485-490, 2008.