volume | PIER Journals

Abstract

In this paper, a cylindrical permanent magnet linear motor (PMLM), which has a high performance, was designed and developed, because the motor has a zero normal force and a higher thrust density. The structure of the motor plays a vital role at the stage of design. During the design stage, several models of the PMLM that had different structural parameters were simulated using FEM software, and the model that produced the high-performance was identified. The structural parameters involved include the radius and height of the permanent magnet, r_pm, and h_pm, the height of coil, h_c, and the shaft radius, r_s, within a fixed total radius, r_total. Each model of the PMLM was simulated using FEM software and the model that produced the highest thrust was identified. To prove its high-performance characteristics, the performance of the PMLM was then compared to the commercialized PMLM using four performance indexes which are thrust F, thrust constant k_f, motor constant k_m and motor constant square density G. About 200 commercialized PMLMs with three different types have been chosen which are the slot type PMLM, slotless type PMLM and shaft motor. Based on the comparisons, the designed PMLM had a better performance than the commercialized PMLM. In order to validate the simulation result, the PMLM was manufactured. The simulation and measurement static thrust characteristics were then compared, and it was found that the simulated thrust had a good agreement with the measured one.

1. Gieras, J. F. and Z. J. Piech, Linear Synchronous Motors: Transportation and Automation Systems, CRC, 2000.

2. Boldea, A. and S. Nasar, Linear Electromagnetic Devices, Taylor & Francis, 2001.

3. Cao, R., M. Cheng, W. Hua, W. Zhao, and X. Sun, "Comparative study of linear double salient permanent magnet motors," 14th Biennial IEEE Conference on Electromagnetic Field Computation (CEFC), 1, 2010. Google Scholar

4. Dorrell, D. G., "Are wound-rotor synchronous motors suitable for use in high efficiency torque-dense automotive drive?," 38th Annual Conference on IEEE Industrial Electronics Society, 4880-4885, 2012. Google Scholar

5. Norhisam, M., H. Ezril, F. Azhar, R. N. Firdaus, H. Wakiwaka, and M. Nirei, "Positioning system for sensor less linear DC motor," of the Japan Society of Applied Electromagnetics and Mechanics (JSAEM), Vol. 19, S91-S94, Supplement, 2011. Google Scholar

6. Yamamoto, Y. and H. Yamada, "Analysis of magnetic circuit and starting characteristics of flat-type linear pulse motor with permanent magnets," T. IEE Japan, Vol. 104-B, No. 5, 265-272, 1984. Google Scholar

7. Laithwaite, E. R., "Linear electric machines --- A personal view," Proceedings of the IEEE, Vol. 63, No. 2, 250-290, 1975.
doi:10.1109/PROC.1975.9734 Google Scholar

8. De Groot, D. J. and C. J. Heuvelman, "Tubular linear induction motor for use as a servo actuator," Electric Power Applications, IEE Proceedings B, Vol. 137, No. 4, 273-280, 1990.
doi:10.1049/ip-b.1990.0033 Google Scholar

9. Sanada, M., Y. Takeda, and T. Hiras, "Cylindrical linear pulse motor with laminated ring teeth," Proceedings of the Second International Conference on Electronic Materials (ICEM’90), Vol. 2, 693-698, 1990. Google Scholar

10. Eastham, J. F., R. Akmese, and H. C. Lai, "Optimum design of brushless tubular linear machines," IEEE Transactions on Magnetics, Vol. 26, No. 5, 2547-2549, 1990.
doi:10.1109/20.104793 Google Scholar

11. Wang, J., G. W. Jewell, and D. Howe, "Design optimisation and comparison of tubular permanent machine topologies," IEE Proceeding Electrical Power Applications, Vol. 148, No. 5, 456-464, 2001.
doi:10.1049/ip-epa:20010512 Google Scholar

12. Azhar, F., M. Norhisam, H. Wakiwaka, K. Tashiro, and M. Nirei, "Design and static characteristics of permanent magnet linear motor for oil palm cutter," The 23th MAGDA Conference, 389-394, 2014. Google Scholar

13. Masanobu, K., H. Toshiyuki, S. Toru, and O. Motomichi, "Development of high-force-density ironcore linear synchronous motor," IEE J. Transactions on Industry Applications, Vol. 132, No. 4, 480-486, 2012.
doi:10.1541/ieejias.132.480 Google Scholar

14. Nakaiwa, K., H. Wakiwaka, and K. Tashiro, "Study and consideration on thrust and harmonic distortion of small cylinder linear synchronous motor," Journal of the Japan Society of Applied Electromagnetics and Mechanics, Vol. 22, No. 2, 238-242, 2014.
doi:10.14243/jsaem.22.238 Google Scholar

15. Zare, M. R., M. Norhisam, C. V. Aravind, N. Mariun, I. Aris, and H. Wakiwaka, "Optimization of mover parameters in high thrust density transverse flux linear motor by genetic algorithm," International Review of Electrical Engineering, Vol. 7, No. 2, 3779-3786, 2012. Google Scholar

16. Firdaus, R. N., M. Norhisam, C. V. Aravind, M. Nirei, and H. Wakiwaka, "Improvement of energy density in single stator interior permanent magnet using double stator topology," Mathematical Problems in Engineering, 1-13, 2014.
doi:10.1155/2014/787382 Google Scholar

17. Tavana, N. R. and V. Dinavahi, "Design of slotted permanent magnet linear synchronous motor for improved thrust density," IEEE International Conference on Electric Machines & Drives (IEMDC), 1225-1228, 2013. Google Scholar

18. Li, L., Y. Tang, B. Kou, and M. Ma, "Design and analysis of ironless linear electromagnetic launcher with high thrust density for space platform," 16th International Symposium on Electromagnetic Launch Technology (EML), 1-6, 2012. Google Scholar

19. Mikami, T. and Y. Fujimoto, "Design of a high-thrust density spiral motor using finite element analysis," 38th Annual Conference on IEEE Industrial Electronics Society, 5416-5421, 2012. Google Scholar

Dr. Fairul Azhar bin Abdul Shukor

Prof. Hiroyuki Wakiwaka

Dr. Kunihisa Tashiro

Dr. Masami Nirei