A miniaturized frequency selective surface (MFSS) that has very stable performance is designed based on the stepped-impedance element (SIE) structure. Significant couplings can be introduced by overlapping one metallic layer above the SIE structure. The large overlapping areas between the two metallic layers is beneficial to further miniaturizing the element size. Therefore, the physical size of the MFSS unit cell can be reduced to 0.054λX0.054λ. In addition, the MFSS is proved to excellent stability towards incident angles (up to 75o) and polarizations. A careful equivalent circuit model is presented to explain the physical principle of the proposed design. Finally, a prototype is fabricated and tested, and the simulation results are in agreement with the experimental observations.
"A Novel Miniaturized Frequency Selective Surface with Very Stable Performance," Progress In Electromagnetics Research C,
Vol. 75, 131-138, 2017. doi:10.2528/PIERC17051603
1. Munk, B. A., Frequency Selective Surfaces: Theory and Design, John Wiley & Sons, 2005.
2. Liu, T., X. Cao, J. Gao, and Q. Zheng, "RCS reduction of waveguide slot antenna with metamaterial absorber," IEEE Trans. Antennas Propag., Vol. 61, No. 3, 1479-1484, 2013. doi:10.1109/TAP.2012.2231922
3. Yoo, M. and S. Lim, "Polarization-independent and ultrawideband metamaterial absorber using a hexagonal artificial impedance surface and a resistor-capacitor layer," IEEE Trans. Antennas Propag., Vol. 62, No. 5, 2652-2658, 2014. doi:10.1109/TAP.2014.2308511
4. Ji, H. K., H. J. Chun, I. P. Hong, Y. J. Kim, and B. P. Yong, "Analysis of FSS radomes based on physical optics method and ray tracing technique," IEEE Antennas Wireless Propag. Lett., Vol. 13, No. 1933, 868-871, 2014.
5. Shang, Y., Z. Shen, and S. Xiao, "Frequency-selective rasorber based on square-loop and crossdipole arrays," IEEE Trans. Antennas Propag., Vol. 62, No. 11, 5581-5589, 2014. doi:10.1109/TAP.2014.2357427
6. Zhang, L., G. Yang, Q. Wu, and J. Hua, "A novel active frequency selective surface with wideband tuning range for EMC purpose," IEEE Trans. Magn., Vol. 48, No. 11, 4534-4537, 2012. doi:10.1109/TMAG.2012.2202099
7. Huang, F., J. C. Batchelor, and E. A. Parker, "Interwoven convoluted element frequency selective surfaces with wide bandwidths," Electron. Lett., Vol. 42, No. 14, 788-790, 2006. doi:10.1049/el:20061589
8. Li, H. and Q. Cao, "Design and analysis of a controllable miniaturized triband frequency selective surface," Progress In Electromagnetics Research Letters, Vol. 52, 105-112, 2015.
9. Sanz-Izquierdo, B., E. A. Parker, J. B. Robertson, et al. "Singly and dual polarized convoluted frequency selective structures," IEEE Trans. Antennas Propag., Vol. 58, No. 3, 690-696, 2010. doi:10.1109/TAP.2009.2039321
10. Liu, H. L., K. L. Ford, and R. J. Langley, "Miniaturised bandpass frequency selective surface with lumped components," Electron. Lett., Vol. 44, No. 18, 1054-1055, 2008. doi:10.1049/el:20081763
11. Deng, F., X. Yi, and W. Wu, "Design and performance of a double-layer miniaturized-element frequency selective surface," IEEE Antennas Wireless Propag. Lett., Vol. 12, 721-724, 2013. doi:10.1109/LAWP.2013.2265095
12. Hussein, M., J. Zhou, Y. Huang, and A. P. Sohrab, "Frequency selective surface with simple configuration stepped-impedance elements," Proc. Eur. Conf. Antennas Propag., Davos, CH, Apr. 10–15, 2016.
13. Smythe, W. R., Static and Dynamic Electricity, McGraw-Hill, 1968.