2019-06-13
A CMOS Power Amplifier Using an Asymmetrical Input Transformer to Enhance the Gain for IEEE 802.11N WLAN Applications
By
Progress In Electromagnetics Research M, Vol. 81, 193-202, 2019
Abstract
In this study, we propose an asymmetrical input transformer for the input baluns in a differential RF CMOS power amplifier to minimize the loss induced by the input transformer. To reduce the loss caused by the magnetic coupling between the primary and secondary parts of a typical transformer, we modify the interconnection between the input transformer and the differential input of the driver stage. Unlike a typical transformer, the primary and secondary parts of the proposed transformer are directly connected to the input of the driver stage. As a result, the input signal in the primary part can reach one of the inputs of the differential driver stage, thereby reducing the loss caused by magnetic coupling. To verify the functionality of the proposed asymmetrical input transformer, we designed a 4.5-GHz differential CMOS power amplifier for IEEE 802.11n WLAN applications with 64-QAM, 9.6 dB PAPR, and a bandwidth of 20 MHz. The designed power amplifier is fabricated using the 180-nm SOI RF CMOS process. The measured maximum linear output power is 17.59 dBm with a gain of 29.23 dB.
Citation
Yonghun Sim, Jinho Yoo, Changhyun Lee, and Changkun Park, "A CMOS Power Amplifier Using an Asymmetrical Input Transformer to Enhance the Gain for IEEE 802.11N WLAN Applications," Progress In Electromagnetics Research M, Vol. 81, 193-202, 2019.
doi:10.2528/PIERM19040904
References

1. Lee, J.-H., W.-J. Jung, J.-W. Jung, J.-E. Jang, and J.-S. Park, "A matched RF charger for wireless RF power harvesting system," Microw. Opt. Technol. Lett., Vol. 57, 1622-1625, 2015.
doi:10.1002/mop.29183        Google Scholar

2. Formato, R. A., "Variable Z0 antenna technology: A new approach for IoT wireless," Int. J. Microw. Wirel. Technol., Vol. 7, 195-203, 2015.
doi:10.1017/S1759078714000634        Google Scholar

3. Jeong, H., G. Ko, H. Shin, I. Kang, J. Yoo, and C. Park, "A CMOS power amplifier using split input and output transformers to minimize its chip area," Microw. Opt. Technol. Lett., Vol. 58, 1443-1446, 2016.
doi:10.1002/mop.29829        Google Scholar

4. Ryu, N., S. Jang, K. C. Lee, and Y. Jeong, "CMOS doherty amplifier with variable balun transformer and adaptive bias control for wireless LAN application," IEEE J. Solid-State Circuits, Vol. 49, 1356-1365, 2014.
doi:10.1109/JSSC.2014.2313561        Google Scholar

5. Ryu, N., B. Park, and Y. Jeong, "A fully integrated high efficiency RF power amplifier for WLAN application in 40 nm standard CMOS process," IEEE Micro. Wirel. Compon. Lett., Vol. 25, 382-384, 2015.
doi:10.1109/LMWC.2015.2421351        Google Scholar

6. Seo, D., S.-H. Lim, H.-J. Ahn, and C. Park, "1.9-GHz CMOS power amplifier using a current source to enhance its dynamic range," Microw. Opt. Technol. Lett., Vol. 56, 1886-1891, 2014.
doi:10.1002/mop.28473        Google Scholar

7. Seo, D. and C. Park, "Split driver stages for a switching mode power amplifier with multipairs of power stages," Microw. Opt. Technol. Lett., Vol. 56, 2341-2345, 2014.
doi:10.1002/mop.28593        Google Scholar

8. Hwang, H., C. Lee, J. Park, and C. Park, "A current-shared cascade structure with an auxiliary power regulator for switching mode RF power amplifiers," IEEE Trans. Microw. Theory Tech., Vol. 62, 2711-2722, 2014.
doi:10.1109/TMTT.2014.2356974        Google Scholar

9. Park, J., C. Lee, and C. Park, "Study of stability problems due to the undesired coupling of a RF power amplifier using a distributed active transformer," Microelectron. J., Vol. 46, 1046-1052, 2015.
doi:10.1016/j.mejo.2015.09.011        Google Scholar

10. Lee, C. and C. Park, "Switching-mode CMOS power amplifier using a differentially coupled series inductor," Progress In Electromagnetics Research Letters, Vol. 81, 59-64, 2019.        Google Scholar

11. Choi, H., Y. Lee, and S. Hong, "A digital polar CMOS power amplifier with a 102-dB power dynamic range using a digitally controlled bias generator," IEEE Trans. Microw. Theory Tech., Vol. 62, 579-589, 2014.
doi:10.1109/TMTT.2014.2298386        Google Scholar

12. Liu, G., P. Haldi, T.-J. K. Liu, and A. M. Niknejad, "Fully integrated CMOS power amplifier with efficiency enhancement at power back-off," IEEE J. Solid-State Circuits, Vol. 43, 600-609, 2008.
doi:10.1109/JSSC.2007.916585        Google Scholar

13. Yang, H.-S., J.-H. Chen, and Y.-J. Chen, "A 1.2-V 90-nm fully integrated compact CMOS linear power amplifier using the coupled L-shape concentric vortical transformer," IEEE Trans. Microw. Theory Tech., Vol. 62, 2689-2699, 2014.
doi:10.1109/TMTT.2014.2352602        Google Scholar

14. Yoon, Y., J. Kim, H. Kim, K. H. An, O. Lee, C.-H. Lee, and J. S. Kenney, "A dual-mode CMOS RF power amplifier with integrated tunable matching network," IEEE Trans. Microw. Theory Tech., Vol. 60, 77-88, 2012.
doi:10.1109/TMTT.2011.2175235        Google Scholar

15. Ham, J., J. Bae, M. Seo, H. Lee, K. C. Hwang, K.-Y. Lee, and Y. Yang, "Dual-mode supply modulator for CMOS envelope tracking power amplifier integrated circuit," Microw. Opt. Technol. Lett., Vol. 57, 1338-1343, 2015.
doi:10.1002/mop.29107        Google Scholar

16. Kim, H., J. Bae, J. Ham, J. Gu, M. Seo, K. C. Hwang, K.-Y. Lee, C.-S. Park, and Y. Yang, "Efficiency enhanced CMOS digitally controlled dynamic bias switching power amplifier for LTE," Microw. Opt. Technol. Lett., Vol. 57, 2315-2321, 2015.
doi:10.1002/mop.29330        Google Scholar

17. Kang, J., J. Yoon, K. Min, D. Yu, J. Nam, Y. Yang, and B. Kim, "A highly linear and efficient differential CMOS power amplifier with harmonic control," IEEE J. Solid-State Circuits, Vol. 41, 1314-1322, 2006.
doi:10.1109/JSSC.2006.874276        Google Scholar

18. Yoo, J., C. Lee, I. Kang, M. Son, Y. Sim, and C. Park, "2.4-GHz CMOS linear power amplifier for IEEE 802.11n WLAN applications," Microw. Opt. Technol. Lett., Vol. 59, 546-550, 2017.
doi:10.1002/mop.30343        Google Scholar

19. Yan, T., H. Liao, C. Li, and R. Huang, "A 2-GHz fully-differential CMOS power amplifier with virtual grounds to suppress ground bounce," Microw. Opt. Technol. Lett., Vol. 49, 2780-2784, 2007.
doi:10.1002/mop.22849        Google Scholar

20. Aoki, I., S. D. Kee, D. B. Rutledge, and A. Hajimiri, "Fully integrated CMOS power amplifier design using the distributed active-transformer architecture," IEEE J. Solid-State Circuits, Vol. 37, 371-383, 2002.
doi:10.1109/4.987090        Google Scholar

21. Aoki, I., S. D. Kee, D. B. Rutledge, and A. Hajimiri, "Distributed active transformer-a new power-combining and impedance-transformation technique," IEEE Trans. Microw. Theory Tech., Vol. 50, 316-331, 2002.
doi:10.1109/22.981284        Google Scholar

22. Guanella, G., "New method of impedance matching in radio frequency circuits," Brown Boveri Rev., Vol. 31, 327-329, 1944.        Google Scholar

23. Park, C., D. H. Lee, J. Han, and S. Hong, "Tournament-shaped magnetically coupled power-combiner architecture for RF CMOS power amplifier," IEEE Trans. Microw. Theory Tech., Vol. 55, 2034-2042, 2007.
doi:10.1109/TMTT.2007.905482        Google Scholar

24. Afsahi, A., A. Behzad, V. Magoon, and L. E. Larson, "Linearized dual-band power amplifiers with integrated baluns in 65nm CMOS for a 2 × 2 802.11n MIMO WLAN SoC," IEEE J. Solid-State Circuits, Vol. 45, 955-966, 2010.
doi:10.1109/JSSC.2010.2041401        Google Scholar

25. Liao, H.-H., H. Jiang, P. Shanjani, J. King, and A. Behzad, "A fully integrated 2 × 2 power amplifier for dual band MIMO 802.11n WLAN application using SiGe HBT Technology," IEEE J. Solid-State Circuits, Vol. 44, 1361-1371, 2009.
doi:10.1109/JSSC.2009.2015817        Google Scholar