2012-10-25
A Quasi-Analytical Model for Remote Field Eddy Current Inspection
By
Progress In Electromagnetics Research M, Vol. 26, 237-249, 2012
Abstract
The Remote Field Eddy Current (RFEC) method is widely used to inspect both ferrous and nonferrous metal tubes when internal access is the only possible way of inspection. An axisymmetric quasi-analytical model is presented in this paper in order to simulate the behavior of a RFEC system during its operation. The proposed model, based on the application of the Fourier Transform in space, is able to take into account the finite length of the excitation coil, fed by an AC current, and the relative movement between the RFEC system and the wall tube. Numerical simulations based on integral formulations and experimental measurements were used to validate the proposed quasi-analytical model.
Citation
Antonino Musolino, Rocco Rizzo, and Ernesto Tripodi, "A Quasi-Analytical Model for Remote Field Eddy Current Inspection," Progress In Electromagnetics Research M, Vol. 26, 237-249, 2012.
doi:10.2528/PIERM12091108
References

1. Musolino, A., M. Raugi, M. Tucci, and F. Turcu, "Time, wavelet and Hilbert-Huang domain analysis of signals from ultrasonic based equipment for the non destructive evaluation of concrete and brick masonry walls," International Conference on Computational Science and Its Applications 2008, Vol. 1, 566-581, Perugia, Jun. 30-Jul. 3, 2008.        Google Scholar

2. Mahmoudi, M. and S. Y. Tan, "Depth detection of conducting marine mines via eddy-current and current-channeling response," Progress In Electromagnetics Research, Vol. 90, 287-307, 2009.
doi:10.2528/PIER09011301        Google Scholar

3. Subbarao, G. V. and R. Mulaveesala, "Quadratic frequency modulated thermal wave imaging for non-destructive testing," Progress In Electromagnetics Research M, Vol. 26, 11-22, 2012.        Google Scholar

4. Schmidt, T. R., "The remote field eddy current inspection technique," Materials Evaluation, Vol. 42, 225-230, 1984.        Google Scholar

5. Atherton, D. L., "Remote field eddy current inspection," IEEE Trans. Magn., Vol. 31, No. 6, 4142-4147, Nov. 1995.
doi:10.1109/20.489888        Google Scholar

6. Kobayashi, N., S. Ueno, S. Nagai, M. Ochiai, and N. Jimbo, "Remote field eddy current testing for steam generator inspection of fast reactor," Nuclear Engineering and Design, Vol. 241, No. 12, 4643-4648, Dec. 2011.
doi:10.1016/j.nucengdes.2011.03.054        Google Scholar

7. Rebican Investigation of numerical precision of 3-D RFECT signal simulations, M., Z. Chen, N. Yusa, K. Miya, T. Uchimoto, and T. Takagi, IEEE Trans. Magn., Vol. 41, No. 5, 1968-1971, May 2005.
doi:10.1109/TMAG.2005.846281        Google Scholar

8. Duchesne, S., N. Bouzida, and J. P. Villeneuve, "Performance estimation of a remote field eddy current method for the inspection of water distribution pipes," J. Water Resour. Plann. Manage, Vol. 137, No. 6, 521-530, 2011.
doi:10.1061/(ASCE)WR.1943-5452.0000136        Google Scholar

9. Thirunavukkarasu, S., B. P. C. Rao, T. Jayakumar, and B. Raj, "Techniques for processing remote field eddy current signals from bend regions of steam generator tubes of prototype fast breeder reactor ," Annals of Nuclear Energy, Vol. 38, No. 4, 817-824, Apr. 2011.
doi:10.1016/j.anucene.2010.11.015        Google Scholar

10. Atherton, D. L., W. Czura, and D. A. Lowther, "Open-boundary finite element calculations for remote field eddy current systems," IEEE Trans. Magn., Vol. 26, No. 5, 2863-2865, Sep. 1990.
doi:10.1109/20.104898        Google Scholar

11. Wang, H., Q. Luo, X.Wang, G. Tian, L. Xing, P.Wang, and Y. Li, "Simulation and experimental study of remote field eddy current Simulation and experimental study of remote field eddy current," Int. J. Appl. Electromagn. Mech., Vol. 33, No. 3, 1261-1266, 2010.        Google Scholar

12. Di Puccio, F., A. Musolino, R. Rizzo, and E. Tripodi, "A self-controlled maglev system," Progress In Electromagnetics Research M, Vol. 26, 187-203, 2012.        Google Scholar

13. Thirunavukkarasu, S., B. P. C. Rao, S. Mahadevan, T. Jayakumar, B. Raj, Z. Zeng, L. Udpa, and S. S. Udpa, "Finite element modeling for detection of localized defects using remote field eddy current technique," Journal of Research in Non destructive Evaluation, Vol. 20, No. 3, 145-258, 2009.        Google Scholar

14. EFFE v2.00 User Manual, Bathwick Electrical Design Ltd., UK, Sep. 2009.

15. Rizzo, R., N. Sgambelluri, E. P. Scilingo, M. Raugi, and A. Bicchi, "Electromagnetic modeling and design of haptic interface prototypes based on magnetorheological fluids," IEEE Trans. Magn., Vol. 43, No. 9, 3586-3598, Sep. 2007..
doi:10.1109/TMAG.2007.901351        Google Scholar

16. Bicchi, A., M. Raugi, R. Rizzo, and N. Sgambelluri, "Analysis and design of an electromagnetic system for the characterization of magneto-rheological fluids for haptic interfaces," IEEE Trans. Magn., Vol. 41, No. 5, 1876-1879, May 2005.
doi:10.1109/TMAG.2005.846280        Google Scholar

17. Musolino, A. and R. Rizzo, "Numerical analysis of brush commutation in helical coil electromagnetic launchers," IET Science, Measurement and Technology, Vol. 5, No. 4, 147-154, Jul. 2011.
doi:10.1049/iet-smt.2010.0098        Google Scholar

18. Musolino, A. and R. Rizzo, "Numerical modeling of helical launchers," IEEE Trans. on Plasma Sci., Vol. 39, No. 3, 935-940, Mar. 2011.
doi:10.1109/TPS.2010.2102046        Google Scholar

19. Di Puccio, F., R. Bassani, E. Ciulli, A. Musolino, and R. Rizzo, "Permanent magnet bearings: Analysis of plane and axisymmetric V-shaped element design," Progress In Electromagnetics Research M, Vol. 26, 205-223, 2012.        Google Scholar

20. Barmada, S., A. Musolino, M. Raugi, and R. Rizzo, "Force and torque evaluation in hybrid FEM-MOM formulations," IEEE Trans. Magn., Vol. 37, No. 5, 3108-3111, Sep. 2001.
doi:10.1109/20.952554        Google Scholar

21. Musolino, A., R. Rizzo, E. Tripodi, and M. Toni, "Modeling of electromechanical devices by GPU-accelerated integral formulation," Int. J. Numer. Model., 1-21, Wiley Online Library, wiley-onlinelibrary.com, DOI:10.1002/jnm.1860, 2012.        Google Scholar

22. Musolino, A., R. Rizzo, E. Tripodi, and M. Toni, "Acceleration of electromagnetic launchers modeling by using graphic processing unit," IEEE 16th EML Symposium Conference Proceedings,, Vol. 1, 1-6, Beijing, May 15{19, 2012.        Google Scholar

23. Barmada, S., A. Musolino, M. Raugi, and R. Rizzo, "Numerical simulation of a complete generator-rail launch system," IEEE Trans. Magn., Vol. 41, No. 1, 369-374, 2005.
doi:10.1109/TMAG.2004.839267        Google Scholar

24. Barmada, S., A. Musolino, M. Raugi, and R. Rizzo, "Analysis of the performance of a combined coil-rail launcher," IEEE Trans. Magn., Vol. 39, No. 1, 103-107, 2003.
doi:10.1109/TMAG.2002.805858        Google Scholar

25. Barmada, S., A. Musolino, M. Raugi, R. Rizzo, and M. Tucci, "A wavelet based method for the analysis of impulsive noise due to switch commutations in power line communication (PLC) systems," IEEE Trans. Smart Grid, Vol. 2, No. 1, 80-89, Mar. 2011.
doi:10.1109/TSG.2010.2099135        Google Scholar

26. Barmada, S., A. Musolino, R. Rizzo, and M. Tucci, "Multiresolution based sensitivity analysis of complex non-linear circuits," IET Circuits, Devices and Systems, Vol. 6, No. 3, 176-186, 2012.
doi:10.1049/iet-cds.2010.0429        Google Scholar

27. Haugland, M., "Fundamental analysis of the remote-field eddy current effect," IEEE Trans. Magn., Vol. 32, No. 4, 3195-3211, 1996.
doi:10.1109/20.508383        Google Scholar

28. Musolino, A., R. Rizzo, and E. Tripodi, "Analysis and design criteria of a tubular linear induction motor for a possible use in the electro-magnetic aircraft launch system," IEEE 16th EML Symposium Conference Proceedings, Vol. 1, 1-6, Beijing, May 15-19, 2012.        Google Scholar

29. Musolino, A., R. Rizzo, and E. Tripodi, "Tubular linear induction machine as a fast actuator: Analysis and design criteria," Progress In Electromagnetics Research, Vol. 132, 603-619, 2012.        Google Scholar

30. Mukerji, S. K., D. S. Srivastava, Y. P. Singh, and D. V. Avasthi, "Eddy current phenomena in laminated structures due to travelling electromagnetic fields," Progress In Electromagnetics Research M, Vol. 18, 159-169, 2011.        Google Scholar

31. Musolino, A., R. Rizzo, and E. Tripodi, "Analytical model of a travelling wave multipole field electromagnetic launcher," IEEE 16th EML Symposium Conference Proceedings, Vol. 1, 1-6, Beijing, May 15-19, 2012.        Google Scholar

32. Barmada, S., A. Musolino, R. Rizzo, and A. Tellini, "Field analysis in axisymmetric actuators," IEEE Trans. Magn., Vol. 36, No. 4, 1906-1909, 2000.
doi:10.1109/20.877819        Google Scholar

33. Musolino, A., "Finite-element method/method of moments formulation for the analysis of current distribution in rail launchers," IEEE Trans. Magn.,, Vol. 41, No. 1, 387-392, 2005.
doi:10.1109/TMAG.2004.839268        Google Scholar

34. Musolino, , A., M. Raugi, and B. Tellini, "3-D field analysis in tubular induction launchers with armature transverse motion," IEEE Trans. Magn., Vol. 35, No. 1, 154-159, 1999.
doi:10.1109/20.738394        Google Scholar

35. Barmada, S., A. Musolino, M. Raugi, and R. Rizzo, "Analysis of the performance of a multi-stage pulsed linear induction launcher," IEEE Trans. Magn., Vol. 37, No. 1, 111-115, Jan. 2001.
doi:10.1109/20.911802        Google Scholar