volume | PIER Journals

Abstract

In this paper, initially a Planar Inverted Cone Metal Antenna (PICMA) is optimized for wideband wireless communication. Finally, a compact Shorted Planar Inverted Cone Metal Antenna (SPICMA) is developed by introducing a shorting strip on the radiating element of optimized PICMA. The PICMA is optimized to operate from 1.7 GHz to more than 20 GHz, and the SPICMA is optimized to extend the operating band from 1.05 GHz to more than 20 GHz resulting in size reduction of 38%. The proposed antenna yields bidirectional radiation pattern in E and H planes. Various characteristics of the antenna have been analyzed using Finite Integration Technique (FIT) based commercial software CST studio. The measured reflection coefficient agrees with the simulated result for the optimized SPICMA.

1. Schantz, H., The Art and Science of Ultra Wideband Antennas, Artech House Inc., 2005.

2. Ghosh, S., "Design of planar crossed monopole antenna for ultrawide-band communication," IEEE Antennas Wireless Propag. Lett., Vol. 10, 548-551, 2011.
doi:10.1109/LAWP.2011.2157888 Google Scholar

3. Lamultree, S. and C. Phongcharoenpanich, "Bidirectional ultra-wideband antenna using rectangular ring fed by stepped monopole," Progress In Electromagnetics Research, Vol. 85, No. 242, 227, 2008.
doi:10.2528/PIER08080103 Google Scholar

4. Agarwall, N. P., G. Kumar, and K. P. Ray, "Wide-band planar monopole antennas," IEEE Trans. Antennas Propag., Vol. 46, No. 2, 294-295, 1998.
doi:10.1109/8.660976 Google Scholar

5. Lee, E., P. S. Hall, and P. Gardner, "Compact wideband planar monopole antenna," Electron. Lett., Vol. 35, No. 25, 2157-2158, 1999.
doi:10.1049/el:19991491 Google Scholar

6. Ray, K. P., P. V. Anob, R. Kapur, and G. Kumar, "Broadband planar rectangular monopole antennas," Microw. Opt. Technol. Lett., Vol. 28, No. 1, 55-59, 2001.
doi:10.1002/1098-2760(20010105)28:1<55::AID-MOP16>3.0.CO;2-X Google Scholar

7. Hallbjorner, P., C. Shi, A. Rydberg, and K. Karlsson, "Modified planar inverted cone antenna for mobile communication handsets," IEEE Antennas Wireless Propag. Lett., Vol. 6, 472-475, 2007.
doi:10.1109/LAWP.2007.907051 Google Scholar

8. Shi, C., P. Hallbjorner, and A. Rydberg, "Printed slot planar inverted cone antenna for ultrawideband applications," IEEE Antennas Wireless Propag. Lett., Vol. 7, 18-21, 2008. Google Scholar

9. Suh, S.-Y., W. L. Stutzman, and W. A. Davis, "A new ultrawideband printed monopole antenna: The planar inverted cone antenna (PICA)," IEEE Trans. Antennas Propag., Vol. 52, No. 5, 1361-1364, 2004.
doi:10.1109/TAP.2004.827529 Google Scholar

10. Li, T., Y. Rao, and Z. Niu, "Analysis and design of UWB Vivaldi antenna," International Symposium on Microwave, Antenna, Propagation and EMC Technologies for Wireless Communications, 579-581, 2007. Google Scholar

11. Yeo, J., Y. Lee, and R. Mittra, "Design of a wideband planar volcano-smoke slot antenna (PVSA) for wireless communications," IEEE International Symposium on Antennas and Propagation Society, Vol. 2, 655-658, 2003. Google Scholar

12. Mondal, S. and P. P. Sarkar, "A novel design of compact wideband hexagonal antenna," Microw. Opt. Technol. Lett., Vol. 55, 1-4, 2013.
doi:10.1002/mop.27276 Google Scholar

13. Mondal, S. and P. P. Sarkar, "Design of an extremely wideband planar elliptical metal antenna," IEEE Antennas Wireless Propag. Lett., Vol. 12, No. 1, 1508-1511, 2013.
doi:10.1109/LAWP.2013.2288988 Google Scholar

14. CST Microwave Studio Manual, Ver. 10, Computer Simulation Technology, Framingham, MA, 2010.

15. Paul, C. R., Introduction to Electromagnetic Compatibility, 2nd Ed., Wiley Interscience, 2006.

Mr. Santanu Mondal

Dr. Partha Pratim Sarkar