volume | PIER Journals

2015-11-17

Reduction of Simulation Times for High-q Structures Using the Resonance Equation

Thomas Wesley Hall,

Mr. Thomas Wesley Hall

University of California

USA

Homepage

Prabhakar R. Bandaru,

Dr. Prabhakar R. Bandaru

Univ Calif San Diego

USA

Homepage

Daniel Rees

Dr. Daniel Rees

Los Alamos National Laboratory

USA

Homepage

Progress In Electromagnetics Research M, Vol. 44, 149-160, 2015

doi:10.2528/PIERM15090802 | Google Scholar

Abstract

Simulating steady state performance of high quality factor (Q) resonant RF structures is computationally difficult for structures with sizes on the order of more than a few wavelengths because of the long times (on the order of ~ 0.1 ms) required to achieve steady state in comparison with maximum time step that can be used in the simulation (typically, on the order of ~ 1 ps). This paper presents analytical and computational approaches that can be used to accelerate the simulation of the steady state performance of such structures. The basis of the proposed approach is the utilization of a larger amplitude signal at the beginning to achieve steady state earlier relative to the nominal input signal. The methodology for finding the necessary input signal is then discussed in detail, and the validity of the approach is evaluated.

Download Full Article (984) View Full Article volume

Citation

Copy Export

Thomas Wesley Hall, Prabhakar R. Bandaru, and Daniel Rees, "Reduction of Simulation Times for High-q Structures Using the Resonance Equation," Progress In Electromagnetics Research M, Vol. 44, 149-160, 2015.
doi:10.2528/PIERM15090802

References

1. Liu, Q. H., "The PSTD algorithm: A time-domain method requiring only two cells per wavelength," Microwave and Optical Technology Letters, Vol. 15, No. 3, 158-158, 1997.
doi:10.1002/(SICI)1098-2760(19970620)15:3<158::AID-MOP11>3.0.CO;2-3 Google Scholar

2. Shaw, A. K. and K. Naishadham, "Efficient ARMA modeling of FDTD time sequences for microwave resonant structures," IEEE Trans. Microwave Theory Tech., Microwave Symposium Digest, Vol. 1, 341-344, 1997. Google Scholar

3. Bondeson, A., T. Rylander, and P. Ingelström, Computational Electromagnetics, Springer, 2005.

4. Lee, T. W. and S. C. Hagness, "Pseudospectral time-domain methods for modeling optical wave propagation in second-order nonlinear materials," Journal of the Optical Society of America B, Vol. 21, No. 2, 2004.
doi:10.1364/JOSAB.21.000330 Google Scholar

5. Insepov, Z., J. Norem, et al. "Modeling RF breakdown arcs,", arXiv:1003.1736, 2011. Google Scholar

6. Kravchuk, L. V., G. V. Romanov, and S. G. Tarasov, "Multipactoring code for 3D accelerating structures,", arXiv:physics/0008015, 2000. Google Scholar

7. Cummings, K. A. and S. H. Risbud, "Dielectric materials for window applications," Journal of Physics and Chemistry of Solids, Vol. 61, No. 4, 2000.
doi:10.1016/S0022-3697(99)00253-X Google Scholar

8. CST Studio Suite, CST, , www.sct.com. Google Scholar

9. Wangler, T. P., "RF Linear Accelerators," Wiley-VCH, 2008. Google Scholar

10. Allen, M. B. and E. L. Isaacson, Numerical Analysis for Applied Science, Wiley, 2011.