volume | PIER Journals

Abstract

It is of great practical value to study the blended rolled edge of reflector used in Compact Antenna Test Range (CATR). Taking a rectangular aperture reflector as the benchmark, a reflector with ideal blended rolled edge is obtained by means of parameter iterative optimization after accurately establishing the position relationship between the local and global coordinates where the blended rolled edge is located, precisely deriving the geometric equation of the main reflector zone and blended rolled edge zone in the local coordinate, and optimizing continuity condition of curvature radius. On the basis, a blended rolled edge reflector with minimum operating frequency of 0.8 GHz and quiet zone size of 2 m is designed. The simulation results show that the performance of the reflector with blended rolled edge obtained by the proposed method is better than that obtained by the traditional construction method, and the designed reflector has excellent performance. The work in this paper provides a theoretical support for the optimal design and engineering application of the blended rolled edge reflector.

1. Johnson, R. C., H. A. Ecker, and R. A. Moore, "Compact range techniques and measurements," IEEE Transactions on Antenna and Propagation, Vol. 17, No. 5, 569-576, 1969.
doi:10.1109/TAP.1969.1139517 Google Scholar

2. Jiang, Y.-Q., C.-J. Mo, W.-Q. Chen, et al. "Research on serrations of reflector used in CATR," 2019 Photonics & Electromagnetics Research Symposium, 1665-1669, Xiamen, China, 2019.
doi:10.1109/PIERS-Fall48861.2019.9021668 Google Scholar

3. Burnside, W. D., M. C. Gilreath, and B. M. Kent, "Rolled edge modification of compact range reflector," Antenna Measurement Techniques Association Symposium, 4B3-1-4B3-28, San Diego, America, 1984. Google Scholar

4. Burnside, W. D., A. K. Dominek, and R. Barger, "Blended surface concept for acompact range reflector," Antenna Measurement Techniques Association Symposium, 10-1-10-10, Melbourne, Australia, 1985. Google Scholar

5. Pistorius, C. W. I. and W. D. Burnside, "A concave edged reflector with blended rolled surface terminations for compact range applications," Antenna Measurement Techniques Association Symposium, 123-128, Ottawa, Canada, 1986. Google Scholar

6. Pistorius, C. W. I., "New main reflector, subreflector and dual chamber concepts for compact range applications,", Ph.D. dissertation, The Ohio State University, 1986. Google Scholar

7. Pistorius, C. W. I. and W. D. Burnside, "The design of blended rolled edges for compact range main reflectors," The 5th International Conference on Antennas and Propagation, 1874-1879, England, Britain, 1987. Google Scholar

8. Burnside, W. D., M. C. Gilreath, B. M. Kent, et al. "Curved edge modification of compact range reflector," IEEE Transactions on Antenna and Propagation, Vol. 35, No. 2, 176-182, 1987.
doi:10.1109/TAP.1987.1144063 Google Scholar

9. Pistorius, C. W. I. and W. D. Burnside, "An improved main reflector design for compact range applications," IEEE Transactions on Antenna and Propagation, Vol. 35, No. 3, 342-347, 1987.
doi:10.1109/TAP.1987.1144101 Google Scholar

10. Gupta, I. J. and W. D. Burnside, "A physical optics correction for backscattering from curved surfaces," IEEE Transactions on Antenna and Propagation, Vol. 35, No. 5, 553-561, 1987.
doi:10.1109/TAP.1987.1144142 Google Scholar

11. Pistorius, C. W. I., G. C. Clerici, and W. D. Burnside, "A dual chamber Gregorian subreflector system for compact range applications," IEEE Transactions on Antenna and Propagation, Vol. 37, No. 3, 305-313, 1989.
doi:10.1109/8.18726 Google Scholar

12. Ellingson, S. W., I. J. Gupta, and W. D. Burnside, "Analysis of blended rolled edge reflectors using numerical UTD,", Vol. 38, No. 12, 1969-1971, 1990.
doi:10.1109/8.60989 Google Scholar

13. Gupta, I. J., K. P. Ericksen, and W. D. Burnside, "A method to design blended rolled edges for compact range reflectors," IEEE Transactions on Antenna and Propagation, Vol. 38, No. 6, 853-861, 1990.
doi:10.1109/8.55582 Google Scholar

14. Gupta, I. J. and W. D. Burnside, "Compact range measurement systems for electrically small test zones," IEEE Transactions on Antenna and Propagation, Vol. 39, No. 5, 632-638, 1991.
doi:10.1109/8.81491 Google Scholar

15. Lee, T.-H. and W. D. Burnside, "Performance trade-off between serrated edge and blended rolled edge compact range reflectors," IEEE Transactions on Antenna and Propagation, Vol. 44, No. 1, 87-96, 1996.
doi:10.1109/8.477532 Google Scholar

16. Lee, T.-H. and W. D. Burnside, "Compact range reflector edge treatment impact on antenna and scattering measurements," IEEE Transactions on Antenna and Propagation, Vol. 45, No. 1, 57-65, 1997.
doi:10.1109/8.554241 Google Scholar

17. Proctor, J. R., D. R. Smith, et al. "Compact range rolled edge reflector design, fabrication, installation and mechanical qualication," Antenna Measurement Techniques Association Symposium, 285-292, Georgia, America, 2004. Google Scholar

18. Munoz-Acevedo, A., S. Burgos, and M. Sierra-Castaner, "Performance comparison between serrated edge and rolled edge reflectors inside CATR facilities," European Conference on Antennas and Propagation, 3586-3590, IEEE Press, Rome, Italy, 2011. Google Scholar

19. Tellakula, A., W. R. Griffin, and S. T. Mcbride, "Predicting the performance of a very large, wideband rolled-edge reflector," Antenna Measurement Techniques Association Symposium, 386-392, Suwanee, America, 2015. Google Scholar

20. Tellakula, A., W. R. Griffin, and S. T. Mcbride, "Quiet zone qualication of a very large, wideband rolled-edge reflector," Antenna Measurement Techniques Association Symposium, 245-251, Georgia, America, 2016. Google Scholar

21. David, J. W., M. John, and T. M. Scott, "Advancements in achieving what is asked of a compact range," Antenna Measurement Techniques Association Symposium, 574-580, Columbus, America, 2013. Google Scholar

Dr. Yongquan Jiang

Dr. Hongcheng Yin

Dr. Chongjiang Mo

Dr. Dewang Kong