2008-10-27
Application of a Coaxial-Fed Patch to Microwave Non-Destructive Porosity Measurements in Low-Loss Dielectrics
By
Progress In Electromagnetics Research M, Vol. 5, 1-14, 2008
Abstract
An air-spaced coaxial-fed patch antenna to be used as a microwave sensor for non-destructive porosity measurements in lowloss dielectric materials is presented. The variation of the patch resonant frequency when it is put on the surface of the material under test is used to estimate the dielectric permittivity. Then, a standard two-phase mixture model is used to derive the material degree of porosity from the above permittivity estimate. Measurements at the 2.4 GHz ISM frequency band have been carried out on a set of polymeric samples with artificially induced porosity. The specific choice for the operating frequency is related to the final goal of applying the above microwave sensor for quality control of ceramic materials during the production process.
Citation
Alessandra Zucchelli, Massimo Chimenti, Edoardo Bozzi, and Paolo Nepa, "Application of a Coaxial-Fed Patch to Microwave Non-Destructive Porosity Measurements in Low-Loss Dielectrics," Progress In Electromagnetics Research M, Vol. 5, 1-14, 2008.
doi:10.2528/PIERM08100302
References

1. Lonappan, A., V. Thomas, G. Bindu, C. Rajasekaran, and K. T. Mathew, "Nondestructive measurement of human blodd at microwave frequencies," Journal of Electromagnetics Waves and Application, Vol. 21, No. 8, 1131-1139, 2007.        Google Scholar

2. Wang, Y. and M. N. Afsar, "Measurement of complex permittivity of liquids using waveguide techniques," Progress In Electromagnetics Research, Vol. 42, 131-142, 2003.
doi:10.2528/PIER03010602        Google Scholar

3. Kumar, A. and G. Singh, "Measurement of dielectric constant and loss factor of the dielectric material at microwave frequencies," Progress In Electromagnetics Research, Vol. 69, 47-54, 2007.
doi:10.2528/PIER06111204        Google Scholar

4. Looyenga, H., "Dielectric constants of heterogeneous mixtures," Physics, Vol. 31, 1965.        Google Scholar

5. Kraszewski, A., "Prediction of the dielectric properties of two-phase mixtures," Journal of Microwave Power, Vol. 12, No. 3, 1977.        Google Scholar

6. Bogosanovich, M., "Microstrip patch sensor for measurement of the permittivity of homogeneous dielectric materials," IEEE Transaction on Instrumentation and Measurement, Vol. 49, No. 5, October 2000.        Google Scholar

7. Fratticcioli, E., M. Dionigi, and R. Sorrentino, "A simple and low-cost measurement system for the complex permittivity characterization of materials," IEEE Transactions on Instrumentation and Measurement, Vol. 53, No. 4, August 2004.
doi:10.1109/TIM.2004.830753        Google Scholar

8. Bozzi, E., M. Chimenti, S. Genovesi, E. Salerno, and A. Zucchelli, "Equipment and procedures for microwave non-destructive evaluation of lapideous materials," IEEE Proceedings of the 13th Conference on Microwave Techniques, COMITE, Prague, September 2005.        Google Scholar

9. HF Analysis and Design, CST Microwave Studio, Advanced Topics, version 4, CST --- Computer Simulation Technology, 2002.(available at the web site http://www.ee.bgu.ac.il/∼microwav/CST/Advanced%20Topics.pdf).

10. Balanis, A. C., Antenna Theory: Analysis and Design, Wiley, 1997.

11. Lo, Y. T. and S. W. Lee, Antenna Handbook, Van Nostrand Reinhold Company, 1988.

12. Gupta, K. G., R. Garg, and I. J. Bahl, Microstrip Lines and Slotlines, Artech House, 1979.

13. Bramanti, M., "On the use of microwaves to measure porosity of materials,", CNR technical report, bib. code 2001-TR-21-07, 2001.        Google Scholar