volume | PIER Journals

Abstract

A hybrid mode-matching/compact 2-D finite-difference frequency-domain (MM/compact 2-D FDFD) method is proposed for the analysis of rectangular ridged waveguide discontinuities. In order to apply MM technique, mode spectrum of the ridged waveguide is determined by an improved compact 2-D FDFD method with only two transverse field components at the cutoff frequencies which lead to two independent sets of real symmetric eigenvalue problems for TE and TM modes. Solving these two separate eigenvalue equations, cutoff wave numbers and discrete mode field functions can be obtained respectively from eigenvalues and eigenvectors. Finally, the generalized scattering matrix (GSM) of the rectangular-ridged waveguide step discontinuity can be easily calculated through the transverse field matching procedure. The method is demonstrated at the examples of two waveguide structures, and results are shown to be in excellent agreement with those by the commercial CAD software HFSS.

1. Kirilenko, A., L. Rud, V. Tkachenko, and D. Kulik, "Evanescent-mode ridged waveguide bandpass filters with improved performance," IEEE Transactions on Microwave Theory and Techniques, Vol. 50, 1324-1327, 2002.
doi:10.1109/22.999146 Google Scholar

2. Shen, T. and K. A. Zaki, "Length reduction of evanescent-mode ridge waveguide bandpass filters," Journal of Electromagnetic Waves and Applications, Vol. 17, No. 6, 879-880, 2003.
doi:10.1163/156939303322503475 Google Scholar

3. Mallahzadeh, A. R. and A. Imani, "Double-ridged antenna for wideband applications," Progress In Electromagnetics Research, Vol. 91, 273-285, 2009.
doi:10.2528/PIER09022104 Google Scholar

4. Goussetis, G. and D. Budimir, "Compact ridged waveguide filters with improved stopband performance," IEEE MTT-S International Microwave Symposium Digest, Vol. 2, 953-956, 2003. Google Scholar

5. Gharib, M., E. Mehrshahi, and M. Thyarani, "An accurate design of E-septum waveguide filters with improved stopband, based on mode matching method," Journal of Electromagnetic Waves and Applications, Vol. 22, No. 14-15, 2003-2013, 2008.
doi:10.1163/156939308787537991 Google Scholar

6. Manuilov, M. B., K. V. Kobrin, G. P. Sinyavsky, and O. S. Labunko, "Full wave hybrid technique for CAD of passive waveguide components with complex cross section components with complex cross section ," PIERS Online, Vol. 5, 526-530, 2009. Google Scholar

7. Yu, S. Y. and J. Bornemann, "Classical eigenvalue mode-spectrum analysis of multiple-ridged rectangular and circular waveguides for the design of narrowband waveguide components," International Journal of Numerical Modelling: Electronic Networks, Devices and Fields , Vol. 22, 395-410, 2009.
doi:10.1002/jnm.716 Google Scholar

8. Bornemann, J. and F. Arndt, "Transverse resonance, standing wave, and resonator formulations of the ridge waveguide eigenvalue problem and its application to the design of E-plane finned waveguide filters," IEEE Transactions on Microwave Theory and Techniques, Vol. 38, 1104-1113, 1990.
doi:10.1109/22.57337 Google Scholar

9. Arndt, F., "Advanced hybrid EM CAD approach for fast design solutions," IEEE Microwave Magazine, Vol. 9, 162-170, 2008.
doi:10.1109/MMM.2008.929619 Google Scholar

10. Arndt, F., J. Brandt, V. Catina, J. Ritter, I. Rullhusen, J. Dauelsberg, U. Hilgefort, and W. Wessel, "Fast CAD and optimization of waveguide components and aperture antennas by hybrid MM/FE/MoM/FD methods --- State-of-the-art and recent advances," IEEE Transactions on Microwave Theory and Techniques, Vol. 52, 292-305, 2004.
doi:10.1109/TMTT.2003.820890 Google Scholar

11. Beyer, R. and F. Arndt, "Efficient modal analysis of waveguide filters including the orthogonal mode coupling elements by an MM/FE method ," IEEE Microwave Guided Wave Letters, Vol. 5, 9-11, 1995.
doi:10.1109/75.382376 Google Scholar

12. Arndt, F. and J. Brandt, "Fast hybrid MM/FE CAD tool for the design and optimization of advanced evanescent mode filters," MIOP Microwaves and Optronics Symp. Dig., 1491-1494, 2001.

13. Rong, Y. and K. A. Zaki, "Characteristics of generalized rectangular and circular ridge waveguides," IEEE Transactions on Microwave Theory and Techniques, Vol. 48, 258-265, 2000.
doi:10.1109/22.821772 Google Scholar

14. Arndt, F. and J. Brandt, "Fast hybrid CAD tool for the optimization of ridged waveguide LTCC filters and diplexers," Asia-Pacific Microwave Conference, 2407-2410, 2005.

15. Niu, J. X., Q. Zhang, X. L. Zhou, and Z. Y. Shan, "A compact 2-D finite-difference frequency-domain method for dispersion char-acteristics analysis of trapezoidal-ridge waveguides," International Journal of Infrared and Millimeter Waves, Vol. 29, 519-526, 2008.
doi:10.1007/s10762-008-9345-x Google Scholar

16. Zhao, Y. J., K. L. Wu, and K. K. M. Cheng, "A compact 2-D full-wave finite-difference frequency-domain method for general guided wave structures," IEEE Transactions on Microwave Theory and Techniques, Vol. 50, 1844-1848, 2002.
doi:10.1109/TMTT.2002.800447 Google Scholar

17. Xu, F. and K. Wu, "A compact 2-D finite-difference frequency-domain method combined with implicitly restarted Arnoldi technique," IEEE Transactions on Microwave Theory and Techniques, Vol. 57, 1129-1135, 2009.
doi:10.1109/TMTT.2009.2017344 Google Scholar

18. Zhao, W., H. W. Deng, and Y. J. Zhao, "Application of 4-component compact 2-D FDFD method in analysis of lossy circular metal waveguide," Journal of Electromagnetic Waves and Applications, Vol. 22, No. 17-18, 2297-2308, 2008.
doi:10.1163/156939308787543930 Google Scholar

Dr. Wei Zhao

Dr. Yong-Jiu Zhao

Dr. Hong-Wei Deng

Dr. Duanwei Zhang

Dr. Bing Liu