volume | PIER Journals

Abstract

This paper proposes miniature radio frequency identification (RFID) tag antenna designed to operate on metallic objects, in the UHF frequency range (915 MHz), without significantly degrading its read range. The antenna structure is composed of two parts: Part 1 comprises two square patches electrically connected to the ground plane through vias while Part 2 is an unconnected inter-layer consisting of two square complementary split ring resonators to allow for capacitive reactance increase. Consequently, its self-resonant frequency will shift towards low frequency, which theoretically allows shrinking RFID tag antenna into smaller size. The antenna was simulated and measured to verify its conjugate matching with chip impedance. The results of experimental tests show that the proposed RFID tag offers a maximum read range of 0.82 m when placed on a metallic object. The tag's overall size is 36.7×18.1×3.2 mm³. Both simulation and measurement results are provided to validate the design.

1. Kwon, H. and B. Lee, "Compact slotted planar inverted-F RFID tag mountable on metallic objects," Electron. Lett., Vol. 41, No. 24, 1308-1310, 2005.
doi:10.1049/el:20052940 Google Scholar

2. Son, H. W. and G. Y. Choi, "Orthogonally proximity-coupled patch antenna for a passive RFID tag on metallic surfaces," Microw. Opt. Technol. Lett., Vol. 49, No. 3, 715-717, 2007.
doi:10.1002/mop.22222 Google Scholar

3. Kim, J. S., W. Choi, and G. Y. Choi, "UHF RFID tag antenna using two PIFAs embedded in metallic objects," Electron. Lett., Vol. 44, No. 20, 1181-1182, 2008.
doi:10.1049/el:20080952 Google Scholar

4. Chen, H.-D. and Y.-H. Tsao, "Low-profile PIFA array antennas for UHF band RFID tags mountable on metallic objects," IEEE Transactions on Antennas and Propagation, Vol. 58, No. 4, 1087-1092, 2010.
doi:10.1109/TAP.2010.2041158 Google Scholar

5. Kim, K. H., J. G. Song, D. H. Kim, H. S. Hu, and J. H. Park, "Forkshaped RFID tag antenna mountable on metallic surfaces," Electron. Lett., Vol. 43, No. 25, 1400-1402, 2007.
doi:10.1049/el:20072891 Google Scholar

6. Chen, S.-L., "A miniature RFID tag antenna design for metallic objects application," IEEE Antennas and Wireless Propagation Letters, Vol. 8, 1043-1045, 2009.
doi:10.1109/LAWP.2009.2032252 Google Scholar

7. Chaimool, S. and P. Akkaraekthalin, "A compact dual-band printed dipole antenna based on fractal feature in ISM band," Proc. International Symposium on Antennas and Propagation (ISAP 2008), 27-30, 2008. Google Scholar

8. Lee, , Y.-C., J, and -S. Sun, "Dual-band dipole antenna for RFID tag applications," Proceedings of the 38th European Microwave Conference, 995-997, 2008.
doi:10.1109/EUMC.2008.4751623 Google Scholar

9. Kimouche, H. and H. Zemmour, "A compact fractal dipole antenna for 915MHz and 2.4 GHz RFID tag applications," Progress In Electromagnetics Research Letters, Vol. 26, 105-114, 2011.
doi:10.2528/PIERL11080306 Google Scholar

10. Zainud-Deen, S. H., H. A. Malhat, and K. H. Awadalla, "Fractal antenna for passive UHF RFID applications," Progress In Electromagnetics Research B, Vol. 16, 209-228, 2009.
doi:10.2528/PIERB09051506 Google Scholar

11. Gianvittorio, J. P. and Y. Rahmat-Samii, "Fractal antennas: A novel antenna miniaturization technique, and applications," IEEE Antennas and Propagation Magazine, Vol. 44, No. 1, 20-36, Feb. 2002.
doi:10.1109/74.997888 Google Scholar

12. Best, S. R., "A comparison of the resonant properties of small space-filling fractal antennas," IEEE Antennas and Wireless Propagation Letters, Vol. 2, 197-200, 2003.
doi:10.1109/1-AWP.2003.819680 Google Scholar

13. Loo, C.-H., K. Elmahgoub, F. Yang, A. Elsherbeni, D. Kajfez, A. Kishk, T. lsherbeni, L. Ukkonen, L. Sydnheimo, M. Kivikoski, S. Merilampi, and P. Ruuskanen, "Chip impedance matching for UHF RFID tag antenna design," Progress In Electromagnetics Research, Vol. 81, 359-370, 2008.
doi:10.2528/PIER08011804 Google Scholar

14. Stutzman, W. L. and G. A. Thiele, Antenna Theory and Design, John Wiley & Sons, 1998.

15. Palmer, K. D. and M. W. Rooyen, "Simple broadband measurements of balanced loads using a network analyzer," IEEE Transactions on Instrumentation and Measurement, Vol. 55, No. 1, 266-272, 2006.
doi:10.1109/TIM.2005.861493 Google Scholar

16. Kuo, S.-K., S.-L. Chen, and C.-T. Lin, "An accurate method for impedance measurement of RFID tag antenna," Progress In Electromagnetics Research, Vol. 83, 93-106, 2008.
doi:10.2528/PIER08042104 Google Scholar

17. Qing, X., C. K. Goh, and Z. N. Chen, "Impedance characterization of RFID tag antennas and application in tag co-design," IEEE Transactions on Microwave Theory and Techniques, Vol. 57, No. 5, 1268-1274, 2009.
doi:10.1109/TMTT.2009.2017288 Google Scholar

18. Kim, D., T. W. Koo, J.-I. Ryu, J.-G. Yook, and J. C. Kim, "Accurate impedance measurement and implementation of a folded dipole antenna for RFID tags," Proc. International Symposium on Antennas and Propagation (ISAP 2009), 2009. Google Scholar

19. Marques, R., F. Mesa, J. Martel, and F. Medina, "Comparative analysis of edge- and broadside-coupled split ring resonators for metamaterial design --- Theory and experiment," IEEE Transactions on Antennas and Propagation, Vol. 51, No. 10, 2572-2581, 2003.
doi:10.1109/TAP.2003.817562 Google Scholar

20. Marques, R., F. Medina, and R. Rafii-El-Idrissi, "Role of bianisotropy in negative permeability and left handed metamaterials," Phys. Rev. B, Vol. 65, 144440(1)-144440(6), 2002.
doi:10.1103/PhysRevB.65.100101 Google Scholar

21. Gay-Balmaz, P. and O. J. F. Martina, "Electromagnetic resonances in individual and coupled split-ring resonators," Journal of Applied Physics, Vol. 92, No. 5, 2929-2936, 2002.
doi:10.1063/1.1497452 Google Scholar

22. Baena, J. D., J. Bonache, F. Martin, and R. M. Sillero, "Equivalent-circuit models for split-ring resonators and complementary split-ring resonators coupled to planar transmission lines," IEEE Transactions on Microwave Theory and Techniques, Vol. 53, No. 4, 1451-1461, 2005.
doi:10.1109/TMTT.2005.845211 Google Scholar

23. Pendry, J. B., A. J. Holden, D. J. Robbins, and W. J. Stewart, "Magnetism from conductors and enhanced nonlinear phenomena," IEEE Transactions on Microwave Theory and Techniques, Vol. 47, 2075-2084, Nov. 1999. Google Scholar

24. Smith, D. R., W. J. Padilla, D. C. Vier, S. C. Nemat-Nasser, and S. Schultz, "Composite medium with simultaneously negative permeability and permittivity," Physical Review Letters, Vol. 84, No. 18, May 2000.
doi:10.1103/PhysRevLett.84.4184 Google Scholar

25. Falcone, F., T. Lopetegi, M. A. G. Laso, J. D. Baena, J. Bonache, M. Beruete, R. Marques, F. Martin, and M. Sorolla, "Babinet principle applied to metasurface and metamaterial design," Physical Review Letters, Vol. 93, 197401(1)-197401(4), 2004. Google Scholar

26., Murata MAGICSTRAP R° Application Note, Online Available: http://www.murata.co.jp/products/rfid/index.html. Google Scholar

27. Computer Simulation Technology (CST) Microwave Studio, Version 2010, , 2010. Google Scholar

28. Nikitin, P. V., K. V. S. Rao, S. F. Lam, V. Pillai, R. Martinez, and H. Heinrich, "Power reflection coe±cient analysis for complex impedances in RFID tag design," IEEE Transactions on Microwave Theory and Techniques, Vol. 53, No. 9, 2721-2725, 2005.
doi:10.1109/TMTT.2005.854191 Google Scholar

29. Rao, K. V. S., P. V. Nikitin, and S. F. Lamn, "Antenna design for UHF RFID tags: A review and a practical application," IEEE Transactions on Antennas and Propagation, Vol. 53, No. 12, 3870-3876, Dec. 2005.
doi:10.1109/TAP.2005.859919 Google Scholar

30., Alien Higgs-3, Online Available: http://www.prosign.dk/en/rfid-products/alien-technology/.
doi:10.1109/TAP.2005.859919 Google Scholar

Mr. Ali Sadeq Abdulhadi Jalal

Professor Alyani Ismail

Dr. Adam Reda Hasan Alhawari

Dr. Mohd Fadlee A. Rasid

Dr. Nor Kamariah Noordin

Dr. Mohd Adzir Mahdi